Best Air Switch for Garbage Disposal

An air switch moves the disposal button to the sink top, where a hand can reach it with wet fingers and no wall switch. The right kit is decided under the sink: outlet count, hole size, deck thickness and a receptacle that stays powered.

Plumbing Picks is reader-supported. As an Amazon Associate I earn from qualifying purchases at no extra cost to you. How this site earns

Sink-top air switch button beside a kitchen sink, the control this guide compares.
The button sits on the sink deck; the power module stays under the sink.

The short answer

For a new plug-in control kit, compare the InSinkErator STS-OO for a disposal plus a compatible instant-hot-water dispenser, or the Moen ARC-4200-CHSRS for a single compatible disposal. If an existing switch works and you only want another finish, a compatible decorative button may be enough. Buying a button alone will not add an air switch.

This guide compares maker instructions and exact listings. It covers the control accessory. For motor, mount and grinding choices, use my garbage disposal guide.

Disposal plus hot-water dispenser
InSinkErator STS-OO. Its dual outlet alternates power between the two appliances.
One disposal, longer tube route
Moen ARC-4200-CHSRS. The ARC-4200 platform includes 10 ft of air tubing.
Working switch, wrong finish
InSinkErator STC-MTBLK. A decorative button for a compatible STS assembly that already works.

Price and link note, November 18, 2026: none of the three listings on this page carried a buyable exact-match offer in my price check today, so all three are shown for comparison only, with no link and no price. The comparison stands on the maker documents either way.

Which one fits your sink?

Answer three questions from the maker limits: a second appliance, your hole size, and your deck thickness. The checker names the kit the documents support, or the check to finish first.

Pick your answers and run the check. Both standard kits list a 1-1/2 in. maximum deck, so thickness decides first.

Picks by need

Two complete kits and one button-only part, each from its maker's documents. Every entry on this page is comparison-only today: no link, no price, per the note in the short answer.

  1. For a disposal plus a hot-water dispenser · Comparison only, not linked

    InSinkErator STS-OO Dual-Outlet Kit

    STS-OO (part 76696) · STS-OOSN Satin Nickel (76696A-ISE)

    Best for
    A sink-top disposal control with a compatible instant-hot-water dispenser on the second outlet. It also operates with just the disposal connected.
    Kit contents
    Power module and its 33 in. cord, 6 ft of air tubing, mounting hardware, and Chrome and White button choices in the standard kit.
    Skip it if
    Your second appliance needs uninterrupted power. The second outlet alternates: a connected dispenser stops receiving power while the disposal runs.
  2. For one compatible disposal · Comparison only, not linked

    Moen ARC-4200-CHSRS

    ARC-4200 controller · one outlet · 10 ft air tube

    Best for
    One controlled disposal outlet where the longer included air tube suits the route under the sink. Moen's platform sheet supports all Moen-branded disposals.
    Bundle check
    The CHSRS listing includes buttons in Chrome and Spot Resist Stainless. A base-only ARC-4200 listing can omit finished buttons: Moen's platform sheet says finished buttons are sold separately, and its parts sheet identifies AS-4201 finish-specific button parts.
    Skip it if
    You want a second controlled appliance outlet. This controller has one outlet.
  3. For a finish change on a working switch · Comparison only, not linked

    InSinkErator STC-MTBLK Decorative Button

    Matte Black decorative replacement button · button only

    Best for
    A finish change on a compatible STS assembly that already works. Its listing specifies STS-OO and STS-OOSN assemblies.
    What it is not
    Not a complete air-switch kit. It excludes the actuator and switch, and supplies neither a power module nor the air tube.
    Skip it if
    Your disposal is dead. A dead disposal does not prove the decorative button needs replacement; follow the exact disposal and control troubleshooting instructions, or contact the maker.

Complete kits compared

Fit and contents from the maker documents. The kit listing is separate from the disposal listing; confirm the complete model suffix and contents at checkout.

KitChoose forHole / standard deckTube / included finishControl / extras
InSinkErator STS-OO / STS-OOSNDisposal plus compatible hot-water dispenser1-1/4–1-1/2 in. hole; up to 1-1/2 in. deck6 ft; Chrome and White (STS-OO) or Satin Nickel (STS-OOSN)Alternating dual outlet; disposal cord separate
Moen ARC-4200-CHSRSOne compatible disposal; longer included air tube1-3/8 in. hole; up to 1-1/2 in. deck10 ft; CHSRS listing includes Chrome and Spot Resist Stainless buttonsSingle outlet; check exact bundle and disposal cord

Before you buy a switch

  1. Keep a working control

    Keep a working control if it meets your needs. Moving the button to the sink can be convenient, but it does not improve grinding or clear a jam.

  2. Check the installed model

    Check the installed model. A batch-feed disposal uses its own starting arrangement; do not bypass its interlock to add a countertop button.

  3. Measure the hole and deck

    Measure the hole and deck. Account for the mounting nut, tubing route and room under the sink. A finish that matches your faucet does not establish fit.

  4. Check power first

    Check power first. These modules need the specified grounded receptacle and a compatible cord-connected disposal. A hardwired unit or a receptacle powered only by a wall switch needs an electrical installation check.

Replacing an older InSinkErator switch? Check its module label against the CPSC single-outlet recall (cpsc.gov). Models 76703, STS-SOSN, 78251 and 74300, sold from 2005 through October 2017, are listed. Stop using an affected switch and contact InSinkErator for the free replacement before paying for another kit. The dual-outlet models compared on this page are different models.

Each pick, up close

Comparison only, not linked

InSinkErator STS-OO, the dual-outlet kit

6-ft air tube · 33-in. module cord · Chrome and White buttons · alternating dual outlets

Choose this kit when you want a sink-top disposal control and have a compatible instant-hot-water dispenser to connect to the second outlet. It also operates with just the disposal connected. The standard STS-OO kit includes the power module and its cord, air tubing, mounting hardware and Chrome/White button choices.

The second outlet alternates power. Pressing the button transfers power between outlets. A connected dispenser stops receiving power while the disposal runs, then receives power again when grinding is switched off. Skip this arrangement if your second appliance requires uninterrupted power; it is not an ordinary power strip.

InSinkErator specifies a 1-1/4- to 1-1/2-inch mounting opening and a standard 1-1/2-inch deck limit (InSinkErator submittal). Its installation guide calls for a 1-1/4-inch new hole and the supplied washer for larger existing openings. For a thicker deck, ask InSinkErator for the appropriate extended transmitter before ordering. Have a suitable installer assess a new stone-counter hole.

Pick the finish, not another performance tier. STS-OOSN is the Satin Nickel dual-outlet kit, with a Satin Nickel button included. The manufacturer's catalog identifies STS-OO as part 76696 and STS-OOSN as 76696A-ISE. Some retailer fields write the first model as STS-00; match the kit, part number and contents rather than treating the zeros as a separate upgrade.

  • Complete controller kit with 6-foot air tube
  • Chrome/White or Satin Nickel kit choices
  • Alternating second outlet for a compatible hot-water dispenser
  • Second outlet is not continuously powered during grinding
  • Disposal power cord is separate
  • Thicker decks require a confirmed extended transmitter

Comparison only, not linked

Moen ARC-4200-CHSRS, the single-outlet kit

ARC-4200 controller · one outlet · 10-ft air tube · Chrome and Spot Resist Stainless listing

Compare the Moen when you need one controlled disposal outlet and the longer included air tube suits the route under your sink. Moen's platform sheet supports all Moen-branded disposals (Moen ARC-4200 specification, SPC14932). For another brand, confirm its exact model and electrical requirements instead of assuming the button's appearance means compatibility.

CHSRS and base-only are different purchases. The exact CHSRS listing includes buttons in Chrome and Spot Resist Stainless. Moen's platform sheet says finished buttons are sold separately. That base-unit wording does not establish the contents of every retail bundle: verify CHSRS on the order and both finishes in the selected listing. The parts sheet identifies AS-4201 finish-specific button parts.

The platform sheet specifies a 1-3/8-inch hole, a 1-1/2-inch maximum deck and 10 feet of 1/8-inch air tubing. Its controller is rated 120 V, 60 Hz, 12 A. A longer tube is a layout option, not evidence that the kit is more reliable. Check receptacle access, controller orientation and space around the mounting nut against Moen's instructions.

  • One-outlet controller for a compatible disposal
  • 10-foot air tube on the ARC-4200 platform
  • CHSRS listing includes two button finishes
  • Base-only ARC-4200 listings can omit finished buttons
  • 1-3/8-inch mounting hole and 1-1/2-inch standard deck limit
  • No second controlled appliance outlet

Verdict: a focused single-disposal option for a verified compatible setup. Choose the CHSRS bundle deliberately; a base-only listing can leave you needing a finished button.

Comparison only, not linked

Only changing the button finish?

The InSinkErator STC-MTBLK is a Matte Black decorative replacement button for compatible STS assemblies. Its listing specifies STS-OO and STS-OOSN and excludes the actuator and switch. It is not a complete air-switch kit: it supplies neither a power module nor the air tube. Confirm your existing assembly works and accepts this part before choosing a finish.

A dead disposal does not prove the decorative button needs replacement. Follow the exact disposal and control troubleshooting instructions, or contact the maker. My disposal-not-working guide helps sort the next check without treating every failure as a new appliance purchase.

Power cord, installation and warranty checks

The air button sends an air pulse; the under-sink controller still switches electricity. Do not treat it as waterproof, childproof or a substitute for required electrical protection. Both reviewed controls latch on and off: releasing the button does not stop the disposal. Both manuals warn it may start when the module is plugged in; follow their setup and on/off test before use.

InSinkErator's guide requires its module on the cabinet wall within 3 feet of the receptacle and disposal, connected to a dedicated, grounded, continuously energized 120 V AC outlet. Moen calls for a grounded 120 V household receptacle and a controller orientation that permits drainage. Have an electrician resolve hardwiring, switched-only power or circuit questions under the exact instructions and local requirements.

The module cord is not the disposal cord. STS-OO includes a 33-inch cord for the module; that does not put a cord on your disposal. InSinkErator's current catalog also lists an STS-EZ integrated air-switch/cord option for EZ Connect disposals. Compare that exact accessory with the maker if yours uses EZ Connect instead of buying two incompatible parts. See the disposal replacement planning guide if the job includes a new appliance or electrical work.

InSinkErator specifies a one-year over-the-counter replacement warranty for these switches, separate from a disposal's in-home warranty. The STS-OO retailer data has a conflicting "No Warranty" field; verify coverage with InSinkErator and keep the receipt. Moen's current product page and specification list a one-year limited warranty; its manual body also says one year despite a lifetime-warranty heading. Do not buy either accessory expecting the faucet's or disposal's longer warranty.

Questions buyers ask

Do I need a complete air-switch kit or just a button?

A new installation needs the compatible power controller, air tubing and complete button/transmitter assembly. A decorative replacement button changes the finish on an existing compatible assembly; it does not replace a failed controller or supply the missing kit. Identify the installed model before ordering a part.

Do both outlets on the InSinkErator switch stay powered?

No. The STS-OO and STS-OOSN dual-outlet system alternates power between its two outlets. A compatible instant-hot-water dispenser loses power while the disposal runs, then regains power when the disposal is switched off. It is not a two-outlet strip that supplies both appliances continuously.

Will a garbage disposal air switch fit any counter hole?

Measure the actual hole and deck thickness. InSinkErator specifies a 1-1/4- to 1-1/2-inch opening; its manual calls for a 1-1/4-inch new hole and a washer for larger existing openings. Moen specifies 1-3/8 inches. Both standard assemblies list a 1-1/2-inch maximum deck. InSinkErator directs thicker-deck buyers to its extended transmitter; confirm the exact part before purchase.

Can I add an air switch to a hardwired disposal?

These kits control a disposal through a plug-in power module. A hardwired unit may require an approved cord and changes to the electrical installation. Have a qualified electrician check the disposal instructions, receptacle, circuit and local requirements before buying; do not improvise a plug conversion or bypass a batch-feed interlock.

Is an air switch a hold-to-run or childproof control?

The reviewed controls latch: press and release to start, then press and release again to stop. Releasing the button does not stop a running disposal. They are not childproof controls. Follow the exact installation and supervision instructions; both manuals warn that the disposal may start when the power module is plugged in.

How I chose

The comparison uses current maker pages, specification and installation sheets, the InSinkErator accessory catalog and exact retail listings. Recommendations follow control type, included parts and installation fit; there are no invented durability scores. Read how I pick and about Plumbing Picks.

Written by Isaac Daniels, Licensed Journeyman Plumber (JP507711). Verify my license at verify.sos.ga.gov.

Sources