Best Low-Profile Kitchen Faucets
For the best low-profile kitchen faucets, I compare the lower Delta Collins 340-DST with the chrome Moen Method 7585C pull-out. Start with your sink holes and the full handle path.
As an Amazon Associate I earn from qualifying purchases. How this site earns
Updated November 15, 2026

The short answer
I would choose the Collins 340-DST for its lower handle and three-hole layout. For a pull-out wand or one-hole sink, my chrome substitute is the Moen Method 7585C, provided its drawing and full operating path fit. [2] [7] [9]
- Lower handle, three holes
- Collins 340-DST, with a separate side spray and a New offer at the latest check.
- Pull-out wand or one hole
- Moen Method 7585C, the chrome pull-out substitute, with a New offer at the latest check.
For taller spouts and other faucet styles, see my best kitchen faucet guide. This shortlist focuses on limited space above the sink, an opening window and the moving handle.
Find your fit
I check the raised handle, mounting layout and moving window before deciding. This finder compares exact drawing references; it cannot replace a physical fit check or an in-person assessment.
For the Collins 340-DST, allow at least 2½ inches from its centerline to the backsplash. For the Method, check the full 100° temperature-control handle arc; its drawing gives no numeric rear-clearance minimum.[2] [7]
Calculation Remaining vertical space = measured gap minus the drawing’s handle reference: 8¾ inches for the Collins 340-DST, or 9 11/16 inches for the Method 7585C without its deck plate. A positive result does not allow for your hand, a moving sash or tolerances. The Method’s operating height with its plate needs confirmation for a close fit. [2] [7]
When to call a plumber If the shutoffs do not close, supply fittings do not match, the deck is damaged, or a clearance remains uncertain, get an in-person check before ordering.
Two low-profile faucets, different sink layouts
All vertical figures below start at the mounting surface shown in the relevant maker’s drawing. The handle reference is the starting point for an obstruction above the faucet. On a phone, swipe the table; with a keyboard, focus the table region and use the arrow keys. [2][7]
| Check | Moen Method 7585C, chrome | Collins 340-DST, chrome |
|---|---|---|
| Choose when | You want a pull-out wand or have one mounting hole, and its full handle path fits. [7] | You have a three-hole sink and want the lower raised-handle dimension with a separate side sprayer. [2] |
| Raised-handle height | 9 11/16 in to the handle in the drawing without the deck plate. Confirm the complete operating height with Moen if using the plate under a tight obstruction. [7] | 8¾ in in the exact 340-DST drawing. [2] |
| Outlet and head reference | 6 25/32 in to the lower spray-head reference in the drawing. Check actual clearance for your pots. [7] | 5 7/32 in. [2] |
| Drawing reach | 8 17/32 in to the forward spray-head reference; 7 21/32 in to the lower outlet reference. [7] | 9 3/16 in from mounting centerline to the front reference. [2] |
| Holes and plate | One or three 1½-in holes. Optional deck plate is included; verify the actual sink layout against the manual. [7] [9] | Three holes with outer centers 8 in apart. Included plate incorporates the side sprayer. [2] |
| Rear clearance | The drawing gives no numeric minimum to the backsplash. Check the handle’s full 100° temperature-control arc and hand space. [7] | At least 2½ in from faucet centerline to backsplash. [2] |
| Deck and hole size | Plate-specific drawing labels: 2 in with escutcheon; 2 19/32 in without. Mounting holes 1½ in diameter. The drawing also has a general maximum-deck callout; confirm a close clamping fit with Moen. [7] | 2½-in maximum deck; three 1 5/16–1½-in holes in the drawing. [2] |
| Spray and swivel | Pull-out stream/spray wand, 120° spout rotation. Power Clean spray technology. [7] | Fixed spout with separate side spray; 180° spout rotation. [2] |
| Supply connection | Flexible supply lines ending in 3/8-in compression fittings. [7] | Integrated PEX supply tubes ending in 3/8-in compression fittings. [2] |
| Rated flow | 1.5 gpm at 60 psi. [7] | 1.8 gpm at 60 psi for the exact non-WE model. [2] |
| Exact purchase | See the Method 7585C purchase panel. | See the Collins 340-DST purchase panel above. |
Dimensions and configurations come from the Moen 7585 series drawing and the exact Delta 340-DST drawing. I keep the maker’s different reference points visible. Moen’s product table and drawing also differ on some figures, as explained in its pick below. These dimensions are maker references, not a promise of installed clearance. [2] [7] [9]
Measure the whole operating space
Height above the mounting surface.
Measure to the lowest cabinet, shelf, sill or other obstruction. Check the raised handle, wand at rest and the hand space needed to operate it. The Method drawing shows 9 11/16 inches to its handle without the deck plate; it does not give a separate raised-handle height with that plate. If a close gap requires the plate, have Moen confirm the complete operating height before ordering. [7] [9]Window and handle paths.
An opening sash can hit a faucet that looks low enough while the window is shut. Trace the sash’s complete path and the handle’s hot/cold and on/off travel. Neither is specified as a folding faucet. A height figure does not establish that a projecting sill or an inward-opening window will clear. [2] [7]Holes and deck thickness.
Count the actual holes, measure their center spacing and inspect underneath. The Collins 340-DST needs three holes with outer centers 8 inches apart; its side spray does not convert it into a one-hole faucet. The Method supports one or three 1½-inch holes. Compare the actual clamped thickness with the drawing for the chosen model and plate arrangement. Check how you will close or use an unused fourth hole. [2] [7] [8] [9]Outlet position and washing space.
Compare the drawing reach with the bowl, drain and divider. The 340-DST’s lower outlet leaves less vertical space above the deck for objects under its fixed stream. Check your sink depth and largest pot; the side sprayer is a different way to rinse, not extra room under that spout. [2] [7]Cabinet hose travel and supplies.
Reserve a clear hose path around the disposal, filters and shutoff valves. The Method manual shows a hose weight and a Duralock quick-connect fitting; the weight must move freely. Confirm that both stops suit the specified 3/8-inch compression supplies. Follow the exact manual’s connection, flushing and leak-check steps rather than a universal tightening rule. [2] [7] [8]
Installation references: the Moen Method manual and Delta Collins manual. If a close clearance or a supply connection remains uncertain, settle it before ordering. My pull-down versus pull-out guide explains the broader handling choices. [4] [8]
Moen Method 7585C, chrome pull-out substitute

Moen Method 7585C
Chrome · Pull-out wand · One or three holes
My substitute for the unavailable chrome Collins 4140-DST is the chrome Method 7585C. It keeps the pull-out wand and one-or-three-hole mounting role, with a New offer sold by Amazon.com at this check.
Buy it if you want stream and spray in the main wand, and its handle path and mounting arrangement fit your sink.
Skip it if the window, rear handle movement or under-sink hose path remains obstructed.
The tradeoff is its taller handle reference than the Collins 340-DST and a lower rated flow: 1.5 gpm versus the Delta’s 1.8 gpm at 60 psi.[2] [7] [9]
$162.45 at AmazonPrice as of Nov 22, 2026, 9:30 AM EST. Price and availability can change.
Check Method 7585C on AmazonNew offer sold by Amazon.com at the latest check. Stock and seller can change.
I would use the Method for the pull-out job rather than give up that choice because the old Collins offer changed. Its drawing shows a 120° swiveling spout and stream or spray with the wand pulled out or docked. Moen calls its spray feature Power Clean. I do not treat that name as a guarantee of better rinsing in every sink.[7] [9]
Fit before finish. The 9 11/16-inch handle reference is drawn without the plate. The included optional plate supports the other mounting arrangement, but a tight window or shelf needs the actual installed handle path confirmed. The drawing’s deck limits are configuration-specific: 2 inches with the escutcheon and 2 19/32 inches without it. The specified hole diameter is 1½ inches. The sheet also carries a general 2 5/32-inch maximum-deck callout, so I would confirm the exact clamping arrangement with Moen if a deck is close to one of those limits.[7] [9]
Keep room underneath. I check that the hose weight can travel without catching a disposal, valve or stored items. The manual identifies the pull-out hose, hose weight and Duralock connection. I follow that exact sequence, flush the supply path as instructed and check every connection before using the wand.[8]
The maker’s figures need checking. Moen’s product table lists a 9.04-inch spout height, 10.20-inch reach and 68-inch hose. Its linked drawing instead labels a 9 3/16-inch top-of-head reference, 8 17/32-inch forward reach and a 59-inch hose. These are not interchangeable measurements. I use the drawing’s labeled reference points for screening and ask Moen to confirm the exact revision and installed arrangement when a fit is close. Neither hose length is a promise of usable pull-out travel.[7] [9]
For repair parts, keep the model and receipt and match the actual version. Moen’s parts sheet explicitly separates versions of the Method. A shared family name alone is not enough to select a cartridge or hose.[10]
Previous Collins 4140-DST fit reference
I replaced the chrome Collins 4140-DST purchase recommendation with the chrome Moen Method 7585C because the exact Collins listing returned only a Used offer. The notes below describe the previous Collins model, for identifying an existing faucet or checking its old drawing. They are not specifications for the Moen substitute. [1] [3] [5][9]
- Choose when
- You want a pull-out wand or have one mounting hole, and its taller handle path fits. [1]
- Raised-handle height
- 9 7/8 in without plate; 10 3/8 in with plate. [1]
- Water outlet height
- 6 5/16 in without plate; 6 13/16 in with plate. [1]
- Drawing reach
- 9 in from mounting centerline to the front reference. [1]
- Holes and plate
- One hole without plate, or three with outer hole centers 8 in apart using the included optional plate. [1]
- Rear clearance
- At least 2½ in from faucet centerline to backsplash. [1]
- Deck and hole size
- 2½-in maximum deck; 1 5/16–1½-in hole diameter in the drawing. [1]
- Spray and swivel
- Pull-out stream/spray wand; MagnaTite magnetic docking; 120° spout rotation. [1]
- Supply connection
- Integrated PEX supply tubes ending in 3/8-in compression fittings. [1]
Earlier Collins 4140-DST mounting reference. The one-hole configuration avoids a long deck plate. Delta includes the optional plate for three-hole, 8-inch mounting, but that configuration raises the operating-height reference to 10 3/8 inches. [1] [2] [3] [5]
The wand switches between aerated stream and spray, and the spout swivels 120°. MagnaTite is Delta’s magnetic docking feature. The Collins 4140-DST and 340-DST non-WE models are rated at a maximum 1.8 gpm at 60 psi. That rating does not establish identical spray feel or splash performance. [1] [2] [3] [5]
Box and cabinet checks: the exact chrome 4140-DST listing and Delta sheet identify integrated supply tubes and the optional deck plate. Follow the manual for the hose, weight and connection clip, then check unobstructed movement through the cabinet. A hose’s total length is not the amount you can pull out above the sink. Sources: Delta 4140-DST specification (PDF) (media.deltafaucet.com); Delta 4140-DST installation manual (PDF) (media.deltafaucet.com). [1] [2] [3] [5]
Skip it if an obstruction crosses the raised-handle or window path, the required rear clearance fails, or a filter/disposal prevents the hose from moving. A one-hole sink solves the mounting question only. The 340-DST is worth comparing for lower operating height if its three-hole layout fits your sink. [1] [2] [3] [5]
The earlier Collins 4140-DST installation manual also prohibits portable-dishwasher use. Its own manual, rather than the Moen substitute’s instructions, governs an existing Collins installation. [3][5]
Delta Collins 340-DST, lower handle, side spray

Delta Collins 340-DST
Lower handle · Three holes · Side spray
Buy it if your three-hole sink and measured operating space match the drawing.
The tradeoff is less room under the fixed outlet than a taller faucet, with a separate sprayer for rinsing.[2]
$144.77 at AmazonPrice as of Nov 22, 2026, 9:30 AM EST · low stock then. Price and availability can change.
Check Collins 340-DST on AmazonNew offer sold by Amazon.com at the latest check. Stock and seller can change.
Choose it when the 8¾-inch raised-handle reference and three-hole mounting arrangement suit the space. Its main spout swivels but does not pull out; the separate side sprayer provides the hose. The spray holder is part of the plate, so this exact model does not need a fourth sprayer hole. [2] [4] [6]
The spout swivels 180°, and the maker drawing marks a 5 7/32-inch outlet height. Check that lower outlet against the items you put under the stream. The 9 3/16-inch drawing reach may land differently in a small bowl or over a divider; check the actual layout. [2] [4] [6]
Box and variant checks: the chrome 340-DST includes the side sprayer, plate and integrated supply lines. The family sheet’s 440-DST has a separate sprayer-hole arrangement, and its WE models have a different flow rating. Do not buy by the family drawing heading alone. Sources: Delta 340-DST product page (deltafaucet.com); Delta Collins 140, 340 and 440 specification (PDF) (media.deltafaucet.com); Delta 340-DST family installation manual (PDF) (media.deltafaucet.com). [2] [4] [6]
Skip it for a one-hole-only sink, a backsplash closer than the required centerline clearance, or washing tasks that need more room beneath a fixed stream. If the 8¾-inch dimension is close to your available gap, have Delta confirm the exact unit and handle travel before ordering. [2] [4] [6]
When neither faucet is the right purchase
A portable dishwasher connection needs explicit approval. The Collins 340-DST manual prohibits portable-dishwasher use. I would not assume that the Method can take an adapter either; its linked documents do not establish approval for that application. Get Moen’s confirmation before selecting it for a portable dishwasher. [4] [8] [9][2]
If the gap is below the required handle path, a sill occupies the working space, or the faucet must fold out of a window’s path, keep looking. Neither current pick is specified as a folding faucet. A functioning faucet may need only the correct repair part; use my faucet cartridge guide before deciding to replace the fixture. For other styles, see the kitchen faucet guide and compare the exact drawings. [2] [7]
Warranty is conditional. The Delta and Moen documents describe coverage for eligible original owners, with different terms for other applications. They do not promise free installation or removal labor. Keep the exact model number and receipt and check the terms for the seller, unit and application. For the earlier Collins 4140-DST reference, use its own manual rather than the Method’s warranty. [3] [4] [7] [8][5]
Low-profile kitchen faucet FAQ
Which low-profile kitchen faucet needs less height?
Of the current picks, the Collins 340-DST has the lower raised-handle drawing dimension at 8¾ inches. The Method 7585C drawing shows a 9 11/16-inch handle reference without its plate. A close installation still needs the complete handle path and any plate height confirmed. [2] [7]
Can the Moen Method 7585C fit a one-hole sink?
Yes. Moen specifies a one-or-three-hole installation through 1½-inch holes. The optional deck plate is included. The drawing shows different deck-thickness limits with and without the escutcheon, so I check the actual mounting arrangement as well as the hole count. [7] [9]
Does the 340-DST side sprayer need a fourth hole?
No. On the exact 340-DST, the side sprayer is integrated into the three-hole deck-plate arrangement. The outer centers are 8 inches apart. The related 140-DST and 440-DST configurations on the family sheet are not substitutes for this exact drawing. [2]
How much backsplash clearance do these faucets need?
Delta specifies at least 2½ inches from the Collins 340-DST centerline to the backsplash. The Method drawing does not give that same numeric minimum. I check its full 100° temperature-control handle arc, hand space and window movement instead of borrowing the Delta clearance. [2] [7]
Can I connect a portable dishwasher to either faucet?
The Delta 340-DST manual expressly prohibits portable-dishwasher use. The Method documents I checked do not establish approval for that use, so I would get Moen’s written confirmation before buying an adapter or using it for that application. [4] [8] [9]
Will a low-profile faucet stop splashing?
Height alone does not guarantee that. I check where the outlet lands, sink depth and the items I wash. A lower outlet also reduces room under the fixed stream. The Method’s pull-out wand and the Collins side sprayer provide different ways to direct the rinse. [2] [7]
How I chose this shortlist
I compare exact chrome models by operating height, mounting, spray layout, supplies and cabinet access. Under this guide’s updated shortlist, the Moen Method 7585C replaces the chrome Collins 4140-DST pull-out purchase slot; the Collins 340-DST remains the lower, three-hole option. I kept the previous model’s fit notes separately so they cannot be mistaken for the substitute’s dimensions.
I checked the exact Amazon offers and maker documents on November 15, 2026. The Method 7585C and Collins 340-DST both returned New offers sold by Amazon.com. The original 4140-DST returned only a Used offer. I also considered the Collins 4140-TP-DST, but Delta specifies a full case quantity of three, so I chose the Method for this household comparison instead. I did not turn another finish into a chrome recommendation.
I checked CPSC records on November 15, 2026 and found no matching recall for the exact current faucet models in the available records since 2018. A Moen Flo battery-backup recall and Delta gas-ball-valve recall concern different products. More about my selection method and Plumbing Picks.
Primary sources
- 1. Delta Collins 4140-DST specification, Rev A. Read November 15, 2026.
- 2. Delta Collins family specification, exact 340-DST drawing; printed Rev G. Read November 15, 2026.
- 3. Delta 4140-DST installation instructions, 106557 Rev H. Read November 15, 2026.
- 4. Delta 340-DST installation instructions, 111079 Rev D. Read November 15, 2026.
- 5. Delta exact 4140-DST product information. Read November 15, 2026.
- 6. Delta exact 340-DST product information. Read November 15, 2026.
- 7. Moen Method 7585 series specification and dimensional drawing, Rev 3/17. Read November 15, 2026.
- 8. Moen Method linked installation instructions, INS10117B. Read November 15, 2026.
- 9. Moen exact 7585C product information, chrome; information only. Read November 15, 2026.
- 10. Moen Method parts sheet, exact 7585C chrome identity and version differences. Read November 15, 2026.