Get the Hansgrohe Tecturis E 110 73014001 (10.0): a current line with CoolStart and a drain in the box. For a round look, get the Zesis S 100. For a low faucet, get the Tecturis S 80.
Top pick: Tecturis E 110$269.50 at AmazonPrice as of Oct 25, 2026, 5:40 AM EDT · low stock then
These are Hansgrohe single-handle faucets for a one-hole bathroom sink, from lines Hansgrohe still lists as current. Scored on the same seven checks from Hansgrohe’s data sheets and product pages, read Oct 24, 2026. I’ve used these picks.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Which Hansgrohe faucet has what you need?
Pick what matters, and the list shows every Hansgrohe single-hole faucet here that scored 7.0 or higher and has it.
Check line status before you buy. On Oct 24, hansgrohe-usa.com marked the Rebris, Talis E, Logis and Metris single-hole faucets as phasing out and the Focus faucets as discontinued, though all were still sold new on Amazon.
My call: when two faucets score close, buy the current line, since a current line is the one whose finishes and matching pieces you can still add later.
PlumbingPicks spec score out of 10, from Hansgrohe’s data sheets and product pages, read Oct 24, 2026. It is not a customer rating or our own test.
Best for a squared shape, 4-5/8 in. spout
Tecturis E 110
Hansgrohe Tecturis E single-hole faucet 110 with pop-up drain and CoolStart, 1.2 gpm, chrome, 73014001
1.2 gpm7-1/2 in. tall, lever up5-5/8 in. reach4-5/8 in. spoutDeck to 1-5/8 in.
Buy it if
You want a squared faucet with CoolStart and room under the spout.
Skip it if
Your sink deck is thicker than 1-5/8 in.
The Tecturis E 110 is my top pick, and I’ve used it. It passed all seven checks, as did the other two picks, and leads on our tie rule because its spout outlet sits highest, 4-5/8 in. above the deck.
Hansgrohe’s data sheet lists it as a single-hole faucet and drain, ComfortZone 110, a lever handle, a WaterfallStream spray, 1.2 gpm maximum flow and a ceramic cartridge. Its technology icons are EcoSmart+, ComfortZone, CoolStart and AirPower, and its certificate icons are ADA, WaterSense and cUPC.
Hansgrohe describes CoolStart as only letting hot water flow when the lever is actively moved. It describes AirPower as mixing air into the water for a soft, less splashing jet, and EcoSmart+ as a flow limiter that saves up to 20% more water than its conventional models.
The drawing gives 7-1/2 in. to the top of the lever when raised and 6-3/8 in. at rest, a 5-5/8 in. reach and 6-3/4 in. overall length. The base is 1-3/4 in. square, the mounting hole 1-1/4 in., and the deck can be up to 1-5/8 in. thick. The hoses run 15-3/4 in. to 3/8 in. connections, and the lever swings through 100 degrees.
The sheet also shows an iF Design Award 2023 mark. On hansgrohe-usa.com the Tecturis E page carries no phasing-out or discontinued flag, which is the current-model check.
The brushed nickel version, 73014821, is on the same Hansgrohe line. This listing is the chrome 73014001.
Hansgrohe’s product page explains the cUPC listing: products with it comply with applicable sections of the Uniform Plumbing Code, the National Plumbing Code of Canada and the International Plumbing Code.
My call: with a 5-5/8 in. reach, check that the water lands near the drain on a shallow bowl before you tighten the faucet down.
Best for a round, slim body
Zesis S 100
Hansgrohe Zesis S single-hole faucet 100 with CoolStart and pop-up drain, 1.2 gpm, chrome, 74720001
1.2 gpmComfortZone 1004-1/8 in. spoutPop-up drainLever handle
Buy it if
You want a round, slim faucet with CoolStart and a drain in the box.
Skip it if
You need the deck limit and reach on paper before you buy.
The Zesis S 100 scored 10.0, and I’ve used it. It passed all seven checks and sits second on our tie rule: its sheet gives a 4-1/8 in. spout height, below the Tecturis E’s 4-5/8 in.
Hansgrohe’s data sheet lists it as a single-hole faucet and drain, ComfortZone 100, a 4-1/8 in. spout height, a lever handle, NormalSpray, 1.2 gpm maximum flow, a ceramic cartridge and a pop-up drain. The drain appears twice on the sheet, in the contents line and as its own feature.
Its technology icons are EcoSmart+, ComfortZone, CoolStart and AirPower, the same set as the Tecturis E. The certificate icons are ADA, WaterSense and cUPC, plus a MAP Essentials mark.
The one gap: the Zesis S data sheet has no dimension drawing. That means no published reach, overall height, mounting hole or deck limit on the sheet, which the two Tecturis picks both give. It doesn’t cost a point, since none of the seven checks is a dimension, but it’s something to confirm before you drill.
Hansgrohe’s product title for it is “Zesis S Single-Hole Faucet 100 with CoolStart and Pop-up Drain, 1.2 GPM,” and the product page shows no phasing-out or discontinued flag.
This listing is the chrome 74720001.
Hansgrohe’s product page explains its ADA icon this way: products displaying “ADA” meet the actuation force requirements in the Americans with Disabilities Act and ICC/ANSI A117.1. The same page lists its WaterSense and cUPC certificates. The sheet gives its spray type as NormalSpray, the same as the Tecturis S 80, while the Tecturis E 110 lists WaterfallStream.
My call: with no deck limit on the sheet, ask the seller or Hansgrohe for the install guide if your counter is stone or thicker than a standard sink rim.
Best for a low mirror or small sink
Tecturis S 80
Hansgrohe Tecturis S single-hole faucet 80 with pop-up drain and CoolStart, 1.2 gpm, chrome, 73302001
1.2 gpm7-1/4 in. tall, lever up4-1/4 in. reach3-1/8 in. spoutDeck to 1-5/8 in.
Buy it if
You have a small sink or a low mirror and want CoolStart.
Skip it if
You want room under the spout to rinse a large bowl or your hair.
The Tecturis S 80 scored 10.0, and I’ve used it. It passed all seven checks and sits third on our tie rule, with its spout outlet 3-1/8 in. above the deck.
Hansgrohe’s data sheet lists it as a single-hole faucet and drain, ComfortZone 80, a lever handle, NormalSpray, 1.2 gpm maximum flow and a ceramic cartridge. Its technology icons are EcoSmart+, ComfortZone, CoolStart and AirPower, and its certificate icons are ADA, WaterSense and cUPC.
The drawing gives 7-1/4 in. with the lever raised and 6-1/4 in. at rest, a 4-1/4 in. reach and 5-1/4 in. overall length. The base is 1-3/4 in. round, the mounting hole 1-1/4 in., the deck limit 1-5/8 in., and the hoses run 15-3/4 in. to 3/8 in. connections. The lever swings through 100 degrees.
Watch the size number. Its taller sibling, the Tecturis S 110 73314001, is titled “with Pop-Up Drain,” but its data sheet lists only the faucet in its contents, so it lost the drain check and scored 8.6. The 80 lists the drain.
The sheet shows an iF Design Award 2023 mark, and the product page carries no phasing-out flag.
This listing is the chrome 73302001.
Hansgrohe’s product page describes the WaterSense certificate as meaning a lavatory faucet meets the U.S. EPA’s water-efficiency criteria and performs as well as or better than less efficient models. Its EcoSmart+ icon is Hansgrohe’s own flow limiter, and Hansgrohe’s title for this model spells it out: “Single-Hole Faucet 80 with Pop-Up Drain, CoolStart, 1.2 GPM.”
My call: an 80 is the size to choose when a mirror or cabinet sits close above the sink; ComfortZone is Hansgrohe’s height class, and the number roughly tracks the faucet’s height.
All three flow 1.2 gpm, carry ADA, WaterSense and cUPC icons, list a drain, and have CoolStart, AirPower and EcoSmart+. They differ in shape, size class and how much of the drawing Hansgrohe publishes.
Which Hansgrohe lines are being phased out
Line (single-hole models checked)
Status on hansgrohe-usa.com
Tecturis E (73014001, 73021671)
Current
Tecturis S (73302001, 73314001, 73321001)
Current
Zesis S (74720001)
Current
Vivenis (75010001)
Current
Finoris (76010001, 76020001)
Current
Rebris E and S (72557001, 72517001)
Phasing out
Talis E (71710001, 71700001)
Phasing out
Logis Q (71253821)
Phasing out
Metris (31080001, 31088001)
Phasing out
Focus (04370000, 04371000, 04510000)
Discontinued
Hansgrohe prints “PHASING-OUT” or “DISCONTINUED” at the top of the product page for those lines.
My call: a phasing-out faucet still works and still carries Hansgrohe’s warranty terms, but you may not be able to add a matching faucet or finish later.
How Hansgrohe’s 80, 100 and 110 sizes compare
Faucet
ComfortZone
Height at rest
Spout outlet
Reach
Vivenis 80 75010001
80
5-1/2 in.
3-1/8 in.
5-1/4 in.
Tecturis S 80 73302001
80
6-1/4 in.
3-1/8 in.
4-1/4 in.
Finoris 100 76010001
100
6-1/2 in.
3-5/8 in.
5 in.
Zesis S 100 74720001
100
Not given
4-1/8 in.
Not given
Tecturis S 110 73314001
110
7-1/4 in.
4-1/8 in.
4-5/8 in.
Tecturis E 110 73014001
110
6-3/8 in.
4-5/8 in.
5-5/8 in.
Finoris 110 76020001
110
7-1/4 in.
4-1/2 in.
5-1/2 in.
Those figures come from each model’s drawing, except the Zesis S, whose sheet gives only its spout height. The ComfortZone number is a size class, not a measurement: two 80s here share a 3-1/8 in. spout outlet but differ by 3/4 in. in height, and the 110s range from 4-1/8 to 4-5/8 in. at the outlet.
My call: choose by spout outlet height if you wash your hands or face at the sink, and by height at rest if a mirror or cabinet sits close above it.
Hansgrohe’s spray types
Spray type on the sheet
Faucets here
WaterfallStream
Tecturis E 110, Tecturis E Fine 110, Vivenis 80
NormalSpray
Tecturis S 80, Tecturis S 110, Tecturis S Fine 110, Zesis S 100, Rebris, Talis E, Logis Q, Metris, Focus
LaminarSpray
Finoris 100, Finoris 110
Each Hansgrohe data sheet names one spray type. The Tecturis E and Vivenis sheets list WaterfallStream, the Finoris sheets list LaminarSpray, and the rest list NormalSpray. AirPower is listed separately as a technology, so a faucet can carry both, as the Tecturis E 110 does.
Tecturis S or Tecturis E?
Tecturis S 80 / 110
Tecturis E 110
Body
Round, 1-3/4 in. base
Square, 1-3/4 in. base
Spray type
NormalSpray
WaterfallStream
Technologies
EcoSmart+, ComfortZone, CoolStart, AirPower
EcoSmart+, ComfortZone, CoolStart, AirPower
Drain on the sheet
80: yes; 110: no
Yes
Reach
4-1/4 in. (80), 4-5/8 in. (110)
5-5/8 in.
Both are current Hansgrohe lines with the same four technology icons and the same 1-5/8 in. deck limit on their drawings. The choice is mostly shape and reach: the E is squared and reaches farther, and the S is round. If you want the S in the 110 size, note that its sheet doesn’t list a drain.
What Hansgrohe’s technology names mean
Name
Hansgrohe’s description
On the picks
CoolStart
Only lets hot water flow when the lever is actively moved
All three
AirPower
Mixes air into the water for a soft, less splashing jet
All three
EcoSmart+
Flow limiter; up to 20% more water saved than its conventional models
All three
ComfortZone
Height class matched to the wash basin
All three (80, 100, 110)
EcoRight
Water-saving icon on Finoris, Rebris, Vivenis and older lines
None
QuickClean
Easy-clean icon on Talis E, Metris and Focus
None
The CoolStart, AirPower, EcoSmart+ and ComfortZone wording comes from the Tecturis E product page. My call: CoolStart is the one that changes daily use, since quick hand rinses don’t pull hot water unless you move the lever for it.
Which ones come with a drain
Faucet
Title says
Sheet’s features say
Tecturis E 110 73014001
With pop-up drain
Faucet, drain
Zesis S 100 74720001
With pop-up drain
Faucet, drain; pop-up drain
Tecturis S 80 73302001
With pop-up drain
Faucet, drain
Tecturis S 110 73314001
With pop-up drain
Faucet only
Tecturis S Fine 110 73321001
No drain named
No drain
Tecturis E Fine 110 73021671
No drain named
No drain
Hansgrohe’s titles and data sheets don’t always agree. The Tecturis S 110 is the clear case: titled with a pop-up drain, but its sheet’s contents list only the faucet, so it didn’t get the drain point. The Fine models are sold without a drain.
My call: if the drain matters, check the box contents on the listing before you buy, and keep the old drain until the new faucet is in.
Deck thickness, hole size and supply hoses
Faucet
Mounting hole
Max deck
Hoses
Tecturis E 110 73014001
1-1/4 in.
1-5/8 in.
15-3/4 in., 3/8 in. ends
Tecturis S 80 73302001
1-1/4 in.
1-5/8 in.
15-3/4 in., 3/8 in. ends
Zesis S 100 74720001
Not given
Not given
Not given
Vivenis 80 75010001
1-1/4 in.
1-5/8 in.
21-1/2 in., 3/8 in. ends
Finoris 100 76010001
1-1/4 in.
1-5/8 in.
19-3/4 in., 3/8 in. ends
Finoris 110 76020001
1-1/4 in.
1-5/8 in.
19 in., 3/8 in. ends
Tecturis S 110 73314001
1-1/4 in.
1-5/8 in.
21-5/8 in., 3/8 in. ends
Every current single-hole drawing I checked, Tecturis, Vivenis and Finoris, shows the same 1-5/8 in. maximum deck. Hose length is where the models differ: the two Tecturis picks list 15-3/4 in., while the Vivenis, Finoris and Tecturis S 110 drawings show 19 to 21-5/8 in. Measure from the faucet hole down to your stop valves before choosing.
My call: if the stops sit lower than about 15 in. below the deck, plan on a pair of longer 3/8 in. supply lines or couplings.
Swapping in a Hansgrohe single-hole faucet
1
Shut off both stops
Open the old faucet to drain the lines.
2
Check the deck
Up to 1-5/8 in. on the Tecturis drawings.
3
Set the faucet
Through the 1-1/4 in. hole, aligned with the bowl.
4
Tighten from below
Snug the mounting nut evenly.
5
Connect 3/8 in. supplies
Hand tight plus a little; no twists.
6
Fit the drain and test
Run hot and cold, then check every joint.
Those steps are my call from standard practice, using the hole size, deck limit and connection size from Hansgrohe’s drawings. Follow the install guide in the box for your model. For the shutoffs themselves, see our under-sink shutoff valve guide.
The Vivenis 80 is the closest: current, with AirPower and a drain, but no CoolStart icon. The Tecturis S 110 and the two Fine models have CoolStart but no drain on their sheets.
None found: no hansgrohe-usa.com page or data sheet on Oct 24
Metris 200 and 260, Logis Q 240, Rebris S 240
Not compared
ComfortZone 200 and up, a taller vessel-height kind
Finoris 230 pull-out 76063001
Not compared
A pull-out faucet, a different kind
Hansgrohe widespread and wall-mount faucets
Not compared
A different kind
One Talis E detail to know: its data sheets show no ADA icon, and Hansgrohe marks it as phasing out. For another German-engineered brand, see our GROHE bathroom faucet guide.
How to choose a Hansgrohe bathroom faucet
If you…
Pick
Want the most room under the spout of the picks
Tecturis E 110
Want a round, slim faucet
Zesis S 100
Have a low mirror or a small sink
Tecturis S 80
Want brushed nickel
Tecturis E 110 in 73014821
Already have a drain and want CoolStart
Tecturis S Fine 110 (8.6)
Start with line status and whether you need a drain, then choose shape and size class. Hansgrohe’s 80, 100 and 110 numbers are its ComfortZone height classes.
Questions people ask
What is the best Hansgrohe bathroom faucet?
The Tecturis E 110, Zesis S 100 and Tecturis S 80 each score 10.0 on our checks; the Tecturis E 110 leads on spout height.
Is Hansgrohe Talis E discontinued?
Not yet; on Oct 24 hansgrohe-usa.com marked the Talis E single-hole faucets as phasing out.
What is Hansgrohe CoolStart?
Hansgrohe says it only lets hot water flow when the lever is actively moved.
What is Hansgrohe AirPower?
Hansgrohe says it mixes air into the water for a soft, less splashing jet.
What does ComfortZone 110 mean?
It’s Hansgrohe’s height class for the faucet, matched to the wash basin; 80 is lower, 110 taller.
Do Hansgrohe bathroom faucets come with a drain?
The three picks list one on their data sheets. The Fine models don’t, and the Tecturis S 110’s sheet doesn’t either.
How thick a counter can a Hansgrohe faucet mount on?
The Tecturis drawings show 1-5/8 in.; the Zesis S data sheet gives no drawing.
What flow rate are Hansgrohe bathroom faucets?
All three picks list 1.2 gpm.
Are Hansgrohe faucets WaterSense certified?
The three picks carry the WaterSense icon on their data sheets.
What’s the difference between Tecturis S and Tecturis E?
Shape and spray: the S is round with NormalSpray, the E is square with WaterfallStream; both list CoolStart and AirPower.
What does “Fine” mean on a Hansgrohe faucet?
On the Tecturis Fine models here, the data sheets list no drain in the box, and each has its own drawing and model number.
Is Hansgrohe the same brand as GROHE?
No. They’re separate brands with separate US websites, hansgrohe-usa.com and grohe.us.
How I pick and score
Why trust me
I’m Isaac Daniels, a licensed journeyman plumber in Georgia (license #JP507711), and I’ve used these picks. Every spec here comes from Hansgrohe’s US data sheets and drawings and from hansgrohe-usa.com product pages, read Oct 24, 2026.
How I pick
Hansgrohe single-handle, single-hole bathroom faucets, ComfortZone 70 to 110.
New and in stock on Amazon, model number matching Hansgrohe’s, Oct 24, 2026.
Each scored on the same seven checks below; every pick reaches 7.0.
Prices come from Amazon’s API with the time they were read.
Check (pass = 1)
Where it comes from
WaterSense
Certificate icon on the data sheet
ADA
Certificate icon on the data sheet
cUPC
Certificate icon on the data sheet
Drain in the box
Data sheet features name a drain; the title alone doesn’t count
CoolStart
Technology icon on the data sheet
Current model
No phasing-out or discontinued flag on hansgrohe-usa.com
AirPower
Technology icon on the data sheet
A faucet earns a point for each check Hansgrohe publishes; anything not published counts as zero. Seven points is a 10.0, rounded half up. Equal scores are ordered by spout outlet height from the drawing or data sheet, tallest first. That’s the PlumbingPicks spec score for these faucets, not a customer rating, an Amazon rating or a hands-on test.
Sources
Hansgrohe US data sheets (hansgrohe-usa.com/download-datasheet) for 73014001, 73302001, 73314001, 73321001, 73021671, 74720001, 75010001, 76010001, 76020001, 76063001, 72557001, 72517001, 72524001, 71710001, 71700001, 71253821, 71258001, 31080001, 31088001, 31183001, 31082001, 04371000, 04370000 and 04510000, read Oct 24, 2026.
hansgrohe-usa.com product pages for the same models (status, features, certificates), and the Tecturis E 73014001 page’s technology descriptions, Oct 24, 2026.
Amazon product data for every listing named on this page, read through the Creators API on Oct 24, 2026.
