Best Hansgrohe Kitchen Faucet

Choose the hansgrohe Talis C 04215800 for a lower arch with a slightly higher outlet, or the Focus 04505000 for its pause control and greater published mounting-depth limit. Check the sink opening, handle clearance and hose path before choosing the offered finish.

Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

This document-based comparison uses the maker’s exact product pages and linked family manuals. The checked offers are Talis C in Steel Optic and Focus in Chrome; both exact versions list a maximum 1.75 gpm.

Talis C and Focus: dimensions that change the choice

Use page 5 of the Talis C manual (assets.hansgrohe.com) and page 6 of the Focus manual (assets.hansgrohe.com) to check the measurement endpoints. The Focus is taller overall but has a slightly lower outlet. A taller arch therefore does not automatically give more room directly beneath the outlet.

Both exact models list a 1.75 gpm maximum flow and a 150-degree swivel range on their product pages. Neither number establishes better rinsing, quieter operation or longer life.

Talis C 04215800: lower arch, higher outlet

Choose the Talis C 04215800 when its 15-inch overall height fits below a shelf or window detail and its 9-3/8-inch outlet height works with your basin. Its 8-3/4-inch reach is measured with the spray head docked, as shown in the HighArc drawing (assets.hansgrohe.com). Check both the top of the arch and the outlet position rather than choosing by the HighArc label alone.

The linked exact maker page (hansgrohe-usa.com) identifies the finish as Steel Optic. It lists aerated and shower sprays, MagFit magnetic spray-head docking and automatic return from shower spray when the handle is closed. Those are useful control details if you prefer starting again in stream mode after turning off the faucet.

Skip it if the mounting surface exceeds the manual’s 2-3/8-inch limit, if the 150-degree swivel range does not cover the areas you need, or if its profile is not the appearance you want. Confirm how the handle moves near the backsplash as well as how the spout clears the bowl.

The standard new 04215800 offer checked on October 15, 2026 was sold by Amazon.com, showed stock and had an add-to-cart button. The listing’s model and manufacturer part number both matched. Amazon calls the finish Stainless Steel Optic; the maker calls it Steel Optic.

Check hansgrohe Talis C 04215800 on Amazon →

Focus 04505000: taller body and a pause control

Choose the Focus 04505000 when you want its pull-down control arrangement and have room for a 16-1/8-inch body. The manual drawing (assets.hansgrohe.com) gives a 9-inch outlet height, 8-5/8-inch outlet reach and a maximum mounting depth of 2-3/4 inches. That mounting-depth limit gives a reason to investigate it for a thicker deck where the Talis C would exceed its published limit.

The 04505000 page (hansgrohe-usa.com) lists LaminarSpray and shower spray, a toggle diverter with a temporary pause feature, MagFit docking, a 150-degree swivel range and a 1.75 gpm maximum. Choose it for those documented controls and dimensions. The pause feature is not a replacement for closing the faucet handle.

Skip it if the top of the arch would interfere with a low cabinet or if the slightly shorter reach puts the docked outlet in the wrong place over your sink. The taller body does not give it a higher outlet than the Talis C, and neither faucet is a universal fit for every basin.

The exact chrome 04505000 standard new offer checked on October 15, 2026 was sold by eFaucets through Amazon, showed limited stock and had an add-to-cart button. The model and part-number fields both matched 04505000. Check stock again before ordering.

Check hansgrohe Focus 04505000 on Amazon →

Check the outlet position and handle sweep

Compare three measurements separately: overall height for overhead clearance, outlet height for space below the spray head, and outlet reach for where the docked head sits over the bowl. This comparison uses the outlet-related arrows in the drawings, not the larger dimension to the very front of the spray-head housing.

Measure from your proposed faucet mounting centerline toward the inner bowl. Mark the two outlet positions on a side sketch of the sink. That locates the docked outlet, not the exact landing point of the water. The Focus drawing shows an angled head, so check the outlet direction against the bowl as well as the horizontal reach. Their reaches are close, so a basin ledge or the exact mounting location may matter more than the small difference between the two faucets. A pull-down head adds flexibility during use but does not change where the head rests when docked.

Check the handle in each operating position against the backsplash and anything stored behind the sink. Also look at the side-to-side area the spout can serve. Both product pages list a 150-degree range, so neither should be chosen on an assumption that the spout turns freely through a full circle.

For a broader explanation of the fixture type, read our pull-down kitchen faucet guide. Here, the useful distinction is between the exact Talis C and Focus dimensions and controls, rather than a claim that every faucet in one collection behaves the same way.

Mounting holes, deck thickness and the Talis C plate

The technical-information sections in both linked manuals specify a 1-1/2-inch hole in the mounting surface. Use the manual for the exact model when confirming the opening with your installer. Do not confuse a smaller diameter labeled on the faucet shank drawing with the specified hole in the sink or countertop. The Talis C plate drawing also labels its own center opening; that is a separate part from the mounting surface.

The Talis C instructions (assets.hansgrohe.com) state that the 04215XX0 family includes a baseplate to cover unused holes on a three-hole sink. Its drawing shows a 10-1/2-inch-long plate. That gives you a package and layout detail to check, not proof that the plate fits every three-hole pattern. Compare the existing hole positions, deck shape and plate footprint before ordering.

The optional plate also needs a flat seating area and room around it. If you prefer the faucet without the plate, the manual allows that arrangement on a compatible single-hole sink. Check the delivered parts against the family instructions before beginning the job.

For the Focus offer, do not assume that a plate is included just because the Talis C manual lists one. Its exact product page lists the faucet, connection hoses, mounting set and assembly instructions. Confirm any required cover plate separately. The maximum mounting depths in the table apply only with the maker’s specified mounting arrangement.

Leave a clear path for the pull-down hose

Look below the sink before selecting either faucet. The manuals require an accessible installation and warn against hoses rubbing on items such as a trash bin. Consider the drain piping, disposal, storage shelves and moving bin together. A clear route is part of fit, even when the faucet itself fits the hole.

The Talis C manual includes a hose weight and tells the installer to check retraction and reposition the weight if movement is not smooth. Follow the exact assembly instructions rather than assuming the magnetic dock alone will pull the hose past an obstruction. Do not judge hose clearance from an empty-cabinet product photo.

Both manuals identify 3/8-inch supply stops for the supplied hot and cold hoses and call for installation by a licensed professional plumber. Have the installer confirm the connections and mounting arrangement before buying extra fittings. Our faucet installation guide gives general preparation steps; the model manual controls the actual assembly.

Keep the model number and the delivered manual with the purchase record. Similar-looking heads and hoses are not enough to establish replacement-part compatibility. Use the exact family parts diagram when service is needed.

Match the finish and flow version before ordering

The checked Talis C offer is 04215800 in Steel Optic; the checked Focus offer is 04505000 in Chrome. This is not a comparison of two identical finishes. Decide whether the offered finish matches your sink accessories, then check the complete model number after changing any variant on Amazon.

Neither finish name proves that the whole faucet body is stainless steel. The useful evidence here is the maker’s finish designation and the exact listing match. We have not tested scratch resistance, finish aging or the strength of the magnetic dock.

The Focus manual covers several families and separates their flow ratings. The 04505XX0 family lists 1.75 gpm, while 04920XX0 lists 1.5 gpm. Our linked offer is the 04505000 version. Do not use the lower number from another family row when comparing this offer with Talis C.

Choose between these two by the actual installation: Talis C for its lower arch and slightly higher outlet, or Focus for its listed pause control and greater maximum mounting depth. If neither fits the hole, clearance or hose route, resolve that mismatch before choosing a finish.

Frequently asked questions

Which faucet is taller, Talis C or Focus?

The linked manuals show the Talis C HighArc at 15 inches overall and Focus HighArc at 16-1/8 inches. Their outlet heights run the other way: 9-3/8 inches for Talis C and 9 inches for Focus.

Does the Talis C include a three-hole cover plate?

The linked Talis C manual states that the 04215XX0 HighArc family includes a baseplate. Check the plate footprint, existing hole positions and delivered contents; it is not a universal three-hole fit.

Is the linked Focus a 1.5 gpm model?

No. The checked 04505000 offer belongs to the 1.75 gpm 04505XX0 family in the manual. The separate 04920XX0 family has a 1.5 gpm rating.

Can either of these spouts turn through 360 degrees?

The exact product pages list a 150-degree swivel range for both picks. Do not assume full-circle rotation from the collection name or a product photo.

Does Steel Optic mean a stainless steel faucet body?

The maker identifies Steel Optic as the finish of 04215800. That finish name alone does not establish the material of the whole faucet body.

How we chose

We compared exact hansgrohe product pages and family installation manuals, including the dimension drawings, mounting limits and model-specific flow rows. We separately checked standard new Amazon offers on October 15, 2026 for exact model and part number, finish, seller, stock and cart availability. We did not test the faucets. Other candidates were excluded when an exact offer or consistent current fit documentation was unavailable. Read our selection method and about Plumbing Picks.

Primary sources

• Talis C 04215800 maker page (hansgrohe-usa.com): Steel Optic finish, modes,150-degree swivel,docking and rated flow.
• Focus 04505000 maker page (hansgrohe-usa.com): Chrome finish, modes/pause,150-degree swivel,docking and rated flow.
• Talis C family manual (assets.hansgrohe.com): 04215XX0 dimensions, mounting depth/hole,baseplate,supply/hose and installation requirements.
• Focus family manual (assets.hansgrohe.com): 04505XX0 dimensions, mounting depth/hole,flow-family distinctions and installation requirements.