Best shop vacs for plumbing

I choose the best shop vac for plumbing by the water I need to move: a compact RIDGID for the truck, a cordless Makita for small jobs, or a 16-gallon Craftsman for flooded floors.

As an Amazon Associate I earn from qualifying purchases. How this site earns

RIDGID 4000RV compact wet/dry vacuum
RIDGID 4000RV. Product photo: Amazon.

The short answer

Get RIDGID's 4000RV for the truck. For floods, Craftsman's 16-gallon.

RIDGID 4000RV 4-gallon portable wet/dry vac
Top pick: RIDGID 4000RV$125.45 at AmazonPrice as of Nov 22, 2026, 9:30 AM EST
Check it on Amazon
On this page
  1. My picks
  2. Plumbing jobs
  3. RIDGID 4000RV
  4. Makita XCV11Z
  5. DeWalt DXV09P
  6. Craftsman 16 gallon
  7. Shop-Vac 5989305
  8. Compare
  9. Trips to the drain
  10. Drum size
  11. Power numbers
  12. Hose and cord
  13. Filters
  14. Wet pickup
  15. Safety and recalls
  16. How to choose
  17. FAQ
  18. How I pick

My picks

What a plumber uses a shop vac for

Most plumbing vac work is water: getting it out of a fixture before you work on it, or off the floor after something leaks.

Emptying a toilet before you pull it

Shut the supply, flush, then vacuum what's left in the bowl and tank so the toilet comes up without spilling.

Pulling water out of a backed-up sink or tub

Empty the standing water first so you can see the drain and work on the clog without a mess.

Cleaning up after a leak or a burst line

A water heater, washer hose or supply line that lets go leaves gallons on the floor. That's a job for a big drum with a drain.

Dust when you open a wall

Cutting drywall or plaster to reach a pipe makes fine dust. A HEPA filter keeps it out of the air in an occupied home.

Never flammable liquids

DeWalt's manual says never to vacuum flammable or combustible liquids, explosive dust or hot ashes, or to run the vac where flammable vapors are in the air.

RIDGID 4000RV: the compact vac for the truck

Best compact corded vac for the truck

RIDGID 4000RV 4-gallon portable wet/dry vac

4000RV, 4 gallon (RIDGID catalog 50313)
$125.45
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • 92 CFM, the most airflow listed among these vacs
  • 1-7/8 in. x 8 ft locking pro hose with a smooth inside
  • 20 ft cord that wraps on the handle
  • Tool-free Qwik Lock filter system
  • Full lifetime warranty

Cons

  • No built-in drain: you tip it to empty
  • No casters: you carry it
  • 4 gallons fills fast on a big spill
4 gal5.0 peak HP92 CFM9 amps14.5 lb

Buy it if

You want one vac that rides in the truck and handles toilets, traps and small leaks on service calls.

Skip it if

You're cleaning up a flooded basement. A 16-gallon vac with a drain, like the Craftsman, saves you a dozen trips.

For a plumber's truck, I'd pick the RIDGID 4000RV. It's a 4-gallon vac that RIDGID says has the power of a vac three times its size, and it's small enough to carry into a bathroom with one hand while you carry your bag in the other.

RIDGID lists a 5.0 peak HP motor, 92 CFM of airflow and 9 amps at 120 volts. That 92 CFM is the highest airflow number among the vacs here that publish one. Shop-Vac lists 70 CFM for its 5989305, and Makita lists 57 CFM for the cordless XCV11Z. Craftsman and DeWalt don't publish CFM for their picks.

The hose is what sets it apart. RIDGID calls it a professional locking hose: 1-7/8 inches by 8 feet, with a smooth inside to reduce clogging. RIDGID says it's four times more durable than its standard hose, and it locks into the vac so it won't pull loose when you drag it around a toilet.

The cord is 20 feet and wraps around the large carry handle. On a service call, that reach counts, because the outlet you need is often across the bathroom or behind the vanity you're working on.

Filter changes are tool-free with RIDGID's Qwik Lock system. It ships with the VF3500 fine dust filter. RIDGID also sells a VF3700 wet filter, a VF3600 HEPA filter and VF3501 dust bags in the same size, so you can match the filter to the job.

Know the limits before you buy. RIDGID's spec table says there's no built-in drain and no casters, so you tip it to empty and carry it rather than roll it. Four gallons is drum size, so plan on several trips to the toilet or floor drain on a big spill. Full of water, it's heavy: water weighs about 8.34 pounds a gallon.

RIDGID lists the vac at 14.5 pounds and backs it with a full lifetime warranty. It's sold and shipped by Amazon.

Makita XCV11Z: cordless, with a HEPA filter

Best cordless vac for finished homes

Makita XCV11Z, 2 gallon HEPA

Makita XCV11Z 18V LXT 2-gallon HEPA wet/dry vac, tool only

XCV11Z, tool only (battery and charger sold separately)
See today’s price on Amazon
Check it on Amazon

Pros

  • Cordless on 18V LXT batteries
  • HEPA filter: 99.97% of particles 0.3 microns and up
  • Built-in filter cleaning system
  • Up to 60 minutes on a 5.0Ah battery
  • 76 dB(A) working sound level

Cons

  • 2 gallons gross: small spills only
  • Tool only: battery and charger extra
  • Narrow 1 in. hose
18V LXT2 gal57 CFM27 in. water lift10.1 lb

Buy it if

You're on Makita 18V batteries and work in finished homes where an outlet is hard to reach or dust is the worry.

Skip it if

You pick up more than a toilet's worth of water at a time. The corded RIDGID holds twice as much.

The Makita XCV11Z is the vac I'd pick when there's no outlet handy, or when the job is in a finished home and dust is the worry. It's an 18V LXT cordless wet/dry vac with a 2-gallon gross container and a HEPA filter.

Makita lists 57 CFM of airflow and 27 inches of static water lift from its brushless motor. Water lift is a suction number: how high the vac can pull a column of water. Makita lists up to 60 minutes of continuous run time on one 18V LXT 5.0Ah battery.

The HEPA filter captures 99.97% of particles 0.3 microns and larger, per Makita. That's the reason to own it on a repair that opens a wall. Cutting drywall or plaster to reach a pipe makes fine dust, and a HEPA vac keeps it out of the air in someone's home. Makita also builds in a filter cleaning system to keep suction up as the filter loads.

It weighs 10.1 pounds with a battery, and Makita lists a working sound level of 76 dB(A). In a customer's kitchen, a quieter vac is easier on everyone in the house.

The kit is small: a 1-inch by 6.5-foot anti-static hose, a 5-inch upholstery nozzle, a 7-inch crevice nozzle, the HEPA filter and a pre-filter set. Makita sells the shoulder strap separately, plus a 24 mm tool cuff adapter for the 1-inch hose if you want to hook it to a power tool.

The limits are clear in the numbers. Two gallons is gross container size, so this is for a toilet bowl, a trap's worth of water or a small leak, not a wet floor. It's sold as a bare tool, so you need an 18V LXT battery and charger. If you're not on Makita batteries, the corded RIDGID needs only an outlet.

It's sold and shipped by Amazon. Makita also sells the XCV11T kit with batteries, but this listing is the bare tool.

DeWalt DXV09P: mid-size, with a tank drain

Best mid-size vac with a tank drain

DeWalt DXV09P 9-gallon poly wet/dry vac

DXV09P, 9 gallon poly
See today’s price on Amazon
Check it on Amazon

Pros

  • Large built-in tank drain
  • Rubberized swivel casters
  • 1-7/8 in. x 7 ft hose and 10 ft cord
  • Onboard mesh accessory bag
  • 3-year limited warranty, 1 year free service

Cons

  • Airflow (CFM) not listed by DeWalt
  • Bigger than the RIDGID to carry upstairs
  • Shorter cord than the RIDGID or Craftsman
9 gal5 peak HP10 amps1-7/8 in. hose10 ft cord

Buy it if

You want more capacity than a compact vac and a drain to empty it, without a 16-gallon drum.

Skip it if

You need a vac to carry through finished homes on every call. The 4-gallon RIDGID is easier to haul.

DeWalt's DXV09P is the middle size: a 9-gallon poly vac that DeWalt says is built for jobsite cleanups. It's the smallest vac here with a listed built-in tank drain, and a drain is the feature that matters most once you start picking up water.

Here's why. Water weighs about 8.34 pounds a gallon, so a vac half full of water is a lot to lift and tip over a toilet or tub. With a drain, you set the vac by a floor drain, take off the drain cap and let it empty. DeWalt's manual says to turn off and unplug the vac first, then empty into a suitable drain and put the cap back.

DeWalt lists a 5 peak HP motor, and the manual's spec table lists 10 amps at 120 volts with a single-stage motor. The hose is 1-7/8 inches by 7 feet. The cord is 10 feet with a cord wrap, shorter than the RIDGID's 20 feet, so keep an extension cord on the truck.

It rolls on rubberized swivel casters and has a carry handle. The ON/OFF switch is large, with what DeWalt calls a water-resistant design. Accessories ride in a mesh bag on the vac: two extension wands, floor, utility and crevice nozzles, a washable and reusable cartridge filter and a disposable filter bag.

The manual explains how the float works. When the water reaches a set level, a float rises and cuts off the airflow. You'll hear the motor pitch go up and the suction stop. That's your signal to turn it off, unplug it and empty it. DeWalt warns not to run the motor with the float raised.

DeWalt doesn't publish an airflow number for this vac, so I can't compare it to the RIDGID's 92 CFM. It's bigger than the RIDGID and rolls instead of carrying, so it suits a basement, garage or crawlspace job better than a second-floor bathroom.

DeWalt backs it with a 3-year limited warranty, 1 year of free service and a 90-day satisfaction guarantee. It's sold and shipped by Amazon.

Craftsman CMXEVBE17595: the 16-gallon flood vac

Best for flooded floors

Craftsman CMXEVBE17595 16-gallon wet/dry vac

CMXEVBE17595, 16 gallon with attachments
$149.99
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • 16-gallon drum, the biggest here
  • Extra-large built-in drain
  • 2-1/2 in. Dual-Flex hose resists kinks
  • Cord listed at 246 in., about 20-1/2 ft
  • Rear blower port

Cons

  • Airflow (CFM) and amps not listed by Craftsman
  • Big to haul through a finished house
  • Filter type not named in the overview
16 gal6.5 peak HP2-1/2 in. hose20-1/2 ft cord3-yr warranty

Buy it if

You clean up after water heaters, washer hoses and burst lines, where the water is measured in tens of gallons.

Skip it if

Your vac jobs are toilets and traps. A 4-gallon vac is lighter and fits in a bathroom.

When a water heater lets go or a supply line bursts, you need volume. Craftsman's CMXEVBE17595 is a 16-gallon wet/dry vac with a 6.5 peak HP motor, the biggest drum and the highest peak HP rating here.

Craftsman is upfront that 16 gallons is drum volume, not collection capacity. Real capacity depends on what you pick up and the condition of the filter. Still, a bigger drum means fewer trips to the drain on a flooded basement floor: at least three for a full 40-gallon water heater, compared with ten or more for a 4-gallon vac.

It has what Craftsman calls an extra-large drain for emptying liquids. On a vac this size, that's not optional. At 8.34 pounds a gallon, even half a drum of water is more than you want to lift, and a drain lets you empty it where it sits, near a floor drain or out the door.

The hose is 2-1/2 inches in diameter, the widest here, with what Craftsman calls Dual-Flex: it swivels 180 degrees at each end to resist kinks and crushing. A wide hose moves water quickly and passes bigger debris, like soggy drywall from a wet ceiling, before it clogs.

Craftsman includes a car nozzle, a utility nozzle and a wet nozzle. Hose storage is on board, with accessory and cord organizers. The filter fastening system makes filter changes quick, and the rear blower port turns it into a blower for the garage or deck.

Craftsman lists the cord at 246 inches, about 20-1/2 feet, and a 3-year limited warranty. It's sold and shipped by Amazon.

Two caveats. Craftsman doesn't list airflow or amps on its page, so I can't compare it to the RIDGID's 92 CFM. And the Includes list on Craftsman's page names a 5-gallon vac and a 1-7/8 inch hose, which doesn't match the rest of the page, so I've used the overview and features text instead.

Shop-Vac 5989305: stainless tank, strong suction

Best stainless tank for dirty water

Shop-Vac 5989305 5-gallon stainless wet/dry vac

5989305, 5 gallon stainless
$76.49
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Stainless steel tank that's easy to clean
  • 58 in. sealed pressure, the most suction listed here
  • Three wands, gulper and 10 in. wet/dry nozzle
  • Filter part numbers listed for easy reorders
  • Limited lifetime home-use warranty

Cons

  • 6 ft cord, the shortest here
  • Tank drain not listed
  • Narrow 1.25 in. hose
5 gal4.5 peak HP70 CFM58 in. sealed9.9 amps

Buy it if

You want strong suction in a small vac with a tank you can scrub out after dirty trap water.

Skip it if

You need cord reach. At 6 feet, you'll need an extension cord on most calls.

Shop-Vac's 5989305 is a 5-gallon vac with a stainless steel tank. Shop-Vac says the tank is durable and easy to clean, which counts on plumbing work, where the tank sees dirty trap water and whatever was sitting in a toilet bowl.

Shop-Vac's spec sheet lists 70 CFM of airflow, 58 inches of sealed pressure and 160 peak air watts, from a 4.5 peak HP motor drawing 9.9 amps. Sealed pressure is the suction you get with the hose blocked, the same idea as Makita's water lift. Of the two vacs here that list a suction number, this one is higher: 58 inches against Makita's 27.

Its hose is the narrowest of the corded picks, 1.25 inches by 7 feet. High suction through a narrow hose is a good match for pulling water out of a bowl or a sink. It won't pass bigger debris the way a 2-1/2 inch hose does, so it's not the vac for a wet ceiling.

The kit is the most complete here: three 1.25-inch extension wands, a 10-inch wet/dry nozzle, a crevice tool, a gulper nozzle and a tool holder. Shop-Vac includes a cartridge filter (90304, Type U), a foam sleeve (90585, Type R) and a 5-to-8 gallon disposable filter bag (90661, Type E). Those part numbers make reorders simple.

The weak spot for plumbing is the cord. The spec sheet lists 6 feet, the shortest here, so you'll want an extension cord rated for the vac on most calls. A rear blower port and onboard tool storage round out the features.

The spec sheet doesn't list a tank drain, so plan on tipping it to empty. Shop-Vac also notes that 5 gallons is actual tank volume and doesn't reflect the capacity you get while it's running.

Shop-Vac backs it with a limited lifetime home-use warranty. It's sold and shipped by Amazon.

Compare the five vacs side by side

VacBest forDrumPowerHoseDrain
RIDGID 4000RVTruck vac for service calls4 galCorded, 92 CFM1-7/8 in. x 8 ftNo
Makita XCV11ZCordless, HEPA, finished homes2 gal18V LXT, 57 CFM1 in. x 6.5 ftNot listed
DeWalt DXV09PMid-size with a drain9 galCorded, 10 amps1-7/8 in. x 7 ftYes
Craftsman CMXEVBE17595Flooded floors16 galCorded, 6.5 peak HP2-1/2 in.Extra-large
Shop-Vac 5989305Strong suction, stainless tank5 galCorded, 70 CFM1.25 in. x 7 ftNot listed

How many trips to the drain each vac takes

Divide the water by the drum size and you get the fewest trips you'll make. Real trips are more, because the float shuts the vac off before the drum is full.

Vac (drum)1 flush (1.6 gal)10 gal spill40 gal heater
Makita XCV11Z (2 gal)15 or more20 or more
RIDGID 4000RV (4 gal)13 or more10 or more
Shop-Vac 5989305 (5 gal)12 or more8 or more
DeWalt DXV09P (9 gal)12 or more5 or more
Craftsman CMXEVBE17595 (16 gal)11 or more3 or more

Where the numbers come from: federal rules cap new toilets at 1.6 gallons per flush, and WaterSense toilets use 1.28 gallons or less. A 40-gallon water heater holds up to 40 gallons if it empties onto the floor. Drum sizes are from each maker.

VacWater weight when the drum is fullHow you empty it
Makita XCV11ZAbout 17 lbLift and pour
RIDGID 4000RVAbout 33 lbLift and tip, no drain
Shop-Vac 5989305About 42 lbLift and tip, drain not listed
DeWalt DXV09PAbout 75 lbBuilt-in tank drain
Craftsman CMXEVBE17595About 133 lbExtra-large drain

Water weighs about 8.34 pounds a gallon, per the U.S. Geological Survey. That's the number behind the second table, and it's the reason drains show up on the big vacs. Nobody tips 75 pounds of dirty water into a toilet.

The tables point to a simple split. For toilets, traps and small leaks, a 2- to 5-gallon vac does the job in one trip. Past about 10 gallons, a vac with a drain saves your back and your time.

What drum size to get for plumbing work

Bigger isn't better on a service call. Match the drum to the water you usually pick up.

Makita XCV11Z2 galRIDGID 4000RV4 galShop-Vac 59893055 galDeWalt DXV09P9 galCraftsman CMXEVBE1759516 galMakita XCV11Z2 galRIDGID 4000RV4 galShop-Vac 59893055 galDeWalt DXV09P9 galCraftsman CMXEVBE1759516 gal
Drum or gross container size from each maker. Craftsman, DeWalt and Shop-Vac all say drum size is not the same as the water you can collect before the float shuts the vac off.

A 2-gallon vac covers a toilet bowl and tank, or a sink full of water. A 4- or 5-gallon vac covers the same jobs with room to spare and handles a small leak under a vanity. These are the sizes that fit in a bathroom and ride in the truck.

At 9 gallons and up, you're buying a vac for leaks that reach the floor. Those vacs roll on casters and empty through a drain, and they're better parked in a basement or garage than carried up stairs.

Peak HP, CFM and suction: which number to trust

Shop vac makers publish different power numbers. Here's what each one means and what each maker lists.

VacPeak HPAirflow (CFM)SuctionAmps
RIDGID 4000RV5.092Not listed9
Shop-Vac 59893054.57058 in. sealed pressure9.9
Makita XCV11ZCordless5727 in. water lift18V battery
DeWalt DXV09P5Not listedNot listed10
Craftsman CMXEVBE175956.5Not listedNot listedNot listed

Peak HP is the least useful number. Shop-Vac and DeWalt both say in their fine print that peak horsepower is a lab figure for comparison, not the power the motor makes while you're using it.

CFM is airflow: how much air moves through the hose. It helps with dry debris and with moving water quickly. Sealed pressure and water lift measure suction with the hose blocked, which is what pulls water up out of a bowl or a trap. When a maker lists both, you get the full picture. When it lists neither, compare drum, hose and drain instead.

Hose size and cord length for plumbing jobs

Hose diameter decides what the vac can swallow. Cord length decides whether you need an extension cord to reach the bathroom.

VacHoseCordWhat it means
Makita XCV11Z1 in. x 6.5 ftNone, batteryLight and narrow; small spills
Shop-Vac 59893051.25 in. x 7 ft6 ftNarrow, strong suction; bring an extension cord
RIDGID 4000RV1-7/8 in. x 8 ft, locking20 ftLong reach in a bathroom
DeWalt DXV09P1-7/8 in. x 7 ft10 ftStandard size; cord wrap
Craftsman CMXEVBE175952-1/2 in., Dual-FlexAbout 20-1/2 ftMoves water fast; passes bigger debris

A narrow hose is light and gets into a toilet bowl or a sink drain opening easily. A wide hose moves more water per minute and won't clog on wet drywall or insulation. For the truck, the 1-7/8 inch size on the RIDGID and DeWalt sits in the middle.

If you use an extension cord, size it to the length. DeWalt's manual for the DXV09P calls for 14 AWG up to 50 feet and 12 AWG from 50 to 100 feet, rated for outdoor use, and says to keep the connection out of water.

Filters for wet pickup and for dust

The filter that's right for drywall dust isn't the one you want for a wet floor. Check what each vac ships with.

VacShips withOther filters from the maker
Makita XCV11ZHEPA filter and pre-filter setBuilt-in filter cleaning system
RIDGID 4000RVVF3500 fine dust filterVF3700 wet filter, VF3600 HEPA, VF3501 dust bags
DeWalt DXV09PWashable, reusable cartridge filter and a disposable bagNot listed on the product page
Craftsman CMXEVBE17595Filter (type not named on the overview)Not listed on the product page
Shop-Vac 5989305Cartridge 90304, foam sleeve 90585, bag 90661Part numbers listed for reorders

DeWalt's manual for the DXV09P says the cartridge filter must stay on the filter cage while you vacuum liquids. After a wet job, it says to clean and dry the filter before you use it for dry pickup, or replace it if it got wet.

If you'll cut into walls in occupied homes, a HEPA filter is worth having. Makita ships one, and RIDGID sells a HEPA filter for the 4000RV.

How to pick up water with a shop vac

These steps follow DeWalt's DXV09P manual. Check your own vac's manual, because filter setups differ.

  1. Set the filter for liquids

    DeWalt says the cartridge filter must sit on the filter cage while you vacuum water.

  2. Plug into a safe outlet

    Use an extension cord rated for the length, and keep the connection out of the water.

  3. Vacuum until the float trips

    When the tank fills, the float cuts the airflow. The motor pitch rises and the suction stops.

  4. Turn it off and unplug it

    DeWalt warns not to run the motor with the float raised.

  5. Empty through the drain or tip it

    Remove the drain cap and empty into a suitable drain, then replace the cap.

  6. Clear the hose at the end

    Raise the hose before shutting off, so leftover water runs into the tank.

  7. Dry or replace the filter

    Clean and dry a wet filter before dry pickup. Wash the tank with warm soapy water after messy jobs.

Safety rules and recalls to know

No flammable liquids, vapors or hot ashes

DeWalt's manual lists gasoline, paint thinner, solvent cleaners and oil-based paints among the things never to vacuum, and says not to run the vac where those vapors are in the air.

2018 RIDGID recall: NXT models only

CPSC announced a recall of RIDGID NXT wet/dry vacs, models HD06000 and HD09000, over a shock hazard on Sept 11, 2018. The 4000RV here is a different model. Our CPSC search on Oct 18, 2026 found no recalls for the other four brands' vacs.

Wear eye protection when blowing

DeWalt's manual calls for safety goggles meeting ANSI Z87.1 when you use the vac as a blower, and says to keep bystanders clear.

Don't vacuum toxic material

DeWalt's manual says not to vacuum toxic materials, to reduce the risk from vapors and dust.

Clean the tank after dirty water

DeWalt's manual says to clean the tank after wet, sticky messes with warm soap and water.

How to choose a shop vac for plumbing, step by step

  1. Start with your usual job

    Toilets and traps call for 2 to 5 gallons. Floors after a leak call for 9 to 16.

  2. Pick corded or cordless

    Corded for most work. Cordless if you're on Makita 18V batteries and outlets are hard to reach.

  3. Get a drain on anything 9 gallons or bigger

    A full 9-gallon drum holds about 75 pounds of water.

  4. Check the cord

    20 feet reaches across a bathroom. 6 feet means an extension cord on most calls.

  5. Match the hose to the debris

    1-7/8 in. for general work, 2-1/2 in. for wet drywall and big messes.

  6. Add the right filter

    A wet filter for water where the maker sells one, like RIDGID's VF3700, and HEPA for dust in occupied homes.

If you buy one vac for plumbing, buy the RIDGID 4000RV. It carries easily, the 20-foot cord reaches, and RIDGID backs it for life. Add the Craftsman 16-gallon or the DeWalt 9-gallon if you take on leak cleanups, and the Makita if you're on its batteries and work in finished homes.

For the clog itself, a vac only gets the water out of the way. See our guides to toilet augers and drain snakes for the tool that clears it.

Questions people ask

What is the best shop vac for a plumber?

The RIDGID 4000RV for the truck: 4 gallons, 92 CFM, a 20-foot cord and a full lifetime warranty. Add a 16-gallon vac with a drain, like the Craftsman CMXEVBE17595, for floods.

Which is better, RIDGID or Craftsman?

They suit different jobs here. RIDGID's 4000RV is the compact vac for service calls. Craftsman's CMXEVBE17595 is the 16-gallon vac with a drain for big water.

Which shop vac has the best suction?

Of the vacs here that list suction, the Shop-Vac 5989305 is highest at 58 inches of sealed pressure. For airflow, the RIDGID 4000RV lists the most at 92 CFM.

What is the most powerful shop vac here?

By peak HP, the Craftsman at 6.5. But makers say peak HP is a lab number, not working power. By listed airflow, the RIDGID 4000RV leads with 92 CFM.

Can a shop vac unclog a toilet?

It can empty the bowl so you can see and reach the clog. To clear the clog itself, use a plunger or a toilet auger.

How do I empty a toilet with a shop vac?

Shut off the supply valve and flush. Then vacuum the water left in the bowl and tank with the vac set for wet pickup.

What size shop vac do I need?

2 to 5 gallons for toilets, sinks and small leaks. 9 to 16 gallons with a drain for water on the floor.

Do I need a different filter for water?

Check your manual. DeWalt says the DXV09P's cartridge filter must stay on for liquids. RIDGID sells a VF3700 wet filter for the 4000RV.

Is a HEPA filter worth it?

Yes, if you cut into walls in occupied homes. Makita's XCV11Z captures 99.97% of particles 0.3 microns and larger, per Makita.

Was there a RIDGID shop vac recall?

Yes. In 2018, CPSC announced a recall of RIDGID NXT models HD06000 and HD09000 over a shock hazard. The 4000RV here isn't one of them.

Does a shop vac need a drain?

On 9 gallons and up, yes. A full 9-gallon drum holds about 75 pounds of water, too heavy to tip safely.

Corded or cordless shop vac?

Corded for most plumbing work: more capacity and no battery to charge. Cordless if you're on Makita 18V batteries and need to work away from outlets.

How I picked these

Why trust me

I picked these for plumbing jobs: emptying toilets and traps, pulling water before a clog repair and cleaning up after leaks. Specs come from each maker's product page, spec sheet or manual.

How I pick

  • Fit for the job first: drum size, drain, hose and cord, then power and filters.
  • Specs from maker pages, spec sheets and manuals read the same day, not from memory.
  • Genuine branded listings, new, in stock and shipping now. I check the seller and stock for each exact listing.
  • Prices read from Amazon with the time shown, never typed in. No scores: makers publish different power numbers, and some publish none.

Sources

Related guides