How to replace a Moen 1248 cartridge

Match the valve. Replace the cartridge safely.

As an Amazon Associate I earn from qualifying purchases.

Quick answer

For a confirmed 1248 Roman tub, choose Moen 1248B. Shut off both supplies; remove the handle mechanism and cartridge nut before pulling the cartridge. A 1258 valve or ExactTemp shower needs its own procedure.

Moen 1248B for confirmed 1248 tubs$11.87 at AmazonPrice as of Oct 23, 2026, 5:30 AM EDT

Check it on Amazon

Two separate handles do not identify a Moen 1248. Start with the valve model or the mechanism under the handle. Moen’s Roman-tub charts distinguish fully splined extensions from white adapters and from the long and short extensions assigned to 1258. Compare the actual parts after shutting off the supplies.

1. 1
   Find the Roman-tub shutoffs

   Moen says the supply shutoffs must be off before repair. They may be behind a tub access panel; some installations require the house main. If you cannot locate or operate a reliable shutoff, call a plumber before loosening any retaining part.

2. 2
   Check with the handles open

   After closing the applicable supplies, open both tub handles as Moen instructs to confirm water is off. Keep clear of hot discharge. If sustained flow continues, leave the cartridge nuts installed and have a plumber correct the isolation.

3. 3
   Record each handle arrangement

   Photograph the confirmed 1248 mechanism and retain the removed parts in order. Keep the hot-side and cold-side pieces separate. This is especially useful with white adapters, where the access components differ from the fully splined branch.

The shutoff check belongs before the handle mechanism is dismantled. A cartridge nut is a pressure-retaining part. If the water cannot be stopped, trying to work faster does not make removal safe. Keep the valve assembled and arrange isolation before returning to the 1248 procedure.

Once the handle is off, the 1248 access branch still matters. On the fully splined version, Moen starts with the Phillips screw, then the extension. On the chrome-nut version, its common procedure removes the outer chrome nut and white adapter before the Phillips screw and white extension.

For the white-hex version, keep both supplies off and unthread the white hex nut. Compare the removed assembly with Moen’s drawing below. Its two-piece version still needs the recessed cartridge nut removed; its single-piece version proceeds to pulling the cartridge. If the pieces do not match, stop and ask Moen to identify them.

For a splined extension or chrome-nut assembly, follow its access sequence above before removing the recessed nut. A white adapter that remains secured is a reason to check the mechanism, not to pull harder.

1. 1
   Release any remaining cartridge nut

   Keep both supplies off. For the two-piece white-hex, chrome-nut or splined branch, seat needle-nose pliers in the recessed nut and unthread it counterclockwise. The single-piece white-hex branch skips this operation after the white hex nut is removed. Moen’s article names its 14272 tool as the other way to take this nut off.

2. 2
   Pull the cartridge after the nut is out

   Moen’s next operation uses pliers to pull the cartridge out. Stop if the valve body moves, the threads appear damaged or the part will not release under controlled removal. Have a plumber assess a seized assembly instead of twisting concealed piping.

3. 3
   Clean and resolve flushing safely

   Moen recommends cleaning and flushing before the new 1248 is installed. Follow the controlled procedure below. Keep the supplies off during brushing and cartridge handling; a plumber should handle flushing if the discharge cannot be contained safely at your tub.

4. 4
   Align and seat the replacement

   Match the front cartridge tab to the recessed indentation inside the valve body, then slide the 1248 into place. If it sits high or rotates without locating, stop and check the model, recess and cleanliness. Do not use the nut to force a misaligned cartridge down.

5. 5
   Reinstall the matching retaining parts

   Moen’s common procedure threads a separate cartridge nut clockwise where fitted. Reverse the disassembly sequence for your mechanism, including its white-hex assembly when applicable. Use the actual Roman-tub drawing; no universal torque or extra-turn figure is established by that procedure.

Moen also documents a puller method for the retaining nut. Both documented methods keep nut release separate from pulling the cartridge; a different cartridge family’s removal sequence does not apply here.

Moen says loose debris can obstruct flow or damage a new cartridge. Its cleaning method uses a nylon-bristle brush on the valve’s inside walls. Keep the supplies isolated for that work. Do not add a solvent soak or heat to this 1248 sequence; a seized or damaged valve needs professional assessment.

The separate Moen flushing article warns that water can leave the open body with considerable force. Its deckmount method uses a towel and an upside-down bowl with a helper controlling a slight supply opening. Hot and cold are flushed separately. Keep people clear of the discharge and stop if containment is uncertain.

Moen’s illustrated deckmount flushing example directs water back into a sink. A Roman tub has different deck access and drainage. Ask Moen or a plumber to resolve the containment at your installation before opening water to an exposed valve. Never use household water pressure to shoot out a stuck cartridge.

Handle position depends on the assembly above the 1248. For Moen’s threaded-hub lever, its instructions put the hot stem extension fully clockwise and the cold fully counterclockwise for off before refitting the handle. Apply that rule only to the matching threaded-hub lever; use other handle instructions for other trims.

With the cartridge nut and correct handle assembly secured, restore the supplies carefully and check the tub before returning it to use. Keep clear of hot water. Check shutoff at the spout and inspect accessible areas around the handles and below the deck. Water escaping below the tub calls for isolation and a plumber.

For a confirmed 1248 repair

Moen 1248B cartridge

$11.87 at Amazon

Check it on Amazon

Price as of Oct 23, 2026, 5:30 AM EDT

Read the fit details

For a confirmed 1248 valve

Moen 1248B alternate listing

$23.74 at Amazon

Check it on Amazon

Price as of Oct 23, 2026, 5:30 AM EDT

Read the fit details

For the 1248 cartridge nut

Moen 14272 nut tool

$6.83 at Amazon

Check it on Amazon

Price as of Oct 23, 2026, 5:30 AM EDT

Read the fit details

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Neither 1248B offer makes a 1248 cartridge interchangeable with 1258. Resolve the listing differences in the table below before checkout.

Offer	Use	Fit and quantity check	Trade-off	Buy link
Moen 1248B cartridge	Confirmed 1248 repair	High-flow Roman-tub family; verify selected contents	Title’s Duralast wording is not maker-confirmed here	Check on Amazon
Moen 1248B alternate listing	Confirmed 1248 valve	Same cartridge family; listing details below	No checked performance upgrade	Check on Amazon
Moen 14272 nut tool	Separate cartridge nut	Moen lists 1224 and 1248; not in the 1248 kit	Pliers do the same job when they seat firmly	Check on Amazon

The 1248B offer is the starting choice for a confirmed 1248 Roman-tub repair. Moen lists the 1248 family for high-flow two-handle Roman tubs, including the 4999 valve, and for hot or cold. Match that application to your valve before deciding how many cartridges belong in the order.

A white handle adapter is weaker evidence than an exact parts drawing. Moen’s general identification page puts more than one cartridge number under its white-adapter mechanisms. If that is what you uncover, take a photograph and confirm the model instead of assuming the first white adapter you see proves 1248 fit.

The fully splined extension gives a clearer route. Moen maps kits 101956, 106378, 140709 and 161758 to 1248 in its handle-mechanism chart. That mapping helps identify the family, but it does not make the extension itself the cartridge. The cartridge sits below its own threaded retaining nut.

The selected Amazon title calls this a Duralast part. The Moen product pages we read identify the 1248 application without confirming that construction description. Do not choose it on a promise of ceramic internals or a measured service life. The defensible reason to choose it is the confirmed Moen part fit.

Check the actual package contents before checkout. This ASIN’s listing title does not state a dependable single-cartridge count. The 1248B suffix also appears on Moen’s bulk record. Neither that suffix nor a product photo would settle how many pieces your selected Amazon option contains.

For a drip at a confirmed 1248 tub, the repair still depends on safe access and correct seating. Remove the cartridge nut first, clean the valve as instructed, then align the front tab with the recess. If a new cartridge cannot seat correctly, stop and inspect the fit rather than tightening the nut to force it down.

This alternate Moen 1248B listing is another offer for the same confirmed cartridge family. It is not a separate repair method or a different valve conversion. Start with the 1248 identification checks above; an alternate Amazon listing cannot make the cartridge suit a 1258 mechanism or an unidentified tub valve.

A two-handle tub does not establish failure on both sides. Moen’s spout-leak guidance points to the cartridge or cartridges when a tub will not shut off properly. A drip alone does not identify which side leaks. Set the repair scope from that diagnosis rather than from the number of handles.

If the repair includes both confirmed 1248 sides, keep their handle pieces separate. Photograph the hot assembly and cold assembly before dismantling them. The threaded-hub lever has different hot and cold off positions in Moen’s instructions. Other handle mechanisms need their own assembly directions even though the cartridge family is shared.

The 1248 retaining sequence stays the same whichever of these listings you select. Isolate the supplies before opening the valve, then follow the branch for the actual extension and nut. On a two-piece white-hex assembly, release the remaining recessed nut before pulling the cartridge. Do not treat an outer nut as the whole retainer.

After installation, check each serviced 1248 valve for shutoff and inspect accessible areas below the tub deck. A dry handle opening does not rule out a concealed leak. If water appears below the deck, isolate the supplies and have a plumber inspect the assembly before returning the tub to use.

Choose between these offers only after matching the valve and resolving the listing details in the conflicts table. Neither offer has a checked flow advantage or measured durability advantage over the other. The useful distinction is the selected Amazon offer and its actual contents, not a higher grade of 1248 repair.

Moen 14272 is the tool Moen names for the threaded cartridge nut on a 1248 Roman tub valve. Moen’s Roman tub cartridge article gives two ways to take that nut off: the 14272, or needle-nose pliers seated in the nut’s recesses. The nut unthreads counterclockwise either way.

You may not need it. If the pliers seat firmly in the recesses, the removal steps above work without a special tool. The 14272 earns its place when the pliers keep slipping out of a stubborn nut next to a finished tub deck.

Check what sits on top first. Moen sorts Roman tub handles into white-adapter, chrome-nut and fully splined-extension branches. On the single-piece white-hex branch, taking off the white hex nut is the whole release step, so there’s no separate cartridge nut for the 14272 to grab.

Order it with the cartridge if you want it. Moen’s INS2264 sheet for the hi-flow 1248 two-handle kit says the 14272 isn’t included, so a new 1248B arrives without it. The Amazon listing names Moen 1224 and 1248 cartridge applications and states a 1-year limited warranty.

Isolation comes before the tool touches the nut. INS2264 says to shut off the water, open the handle to relieve pressure and confirm the water is fully off. Moen’s MB107C sheet warns that an improperly installed retainer nut can let water pressure push the cartridge out, with a risk of injury or water damage.

Going back together, the nut threads on clockwise after the cartridge tab sits in the body recess. Start it by hand so it can’t cross-thread, as MB107C cautions, then check the whole repair for leaks once the water is back on.

My call: I’ve used the 14272, and it’s worth adding to the order when the nut is the stubborn part. If your pliers already grip the recesses cleanly, the 1248B alone finishes the job.

Moen’s general chrome-nut chart lists 1224/1248; its knob page lists 14891/1248 for that broad appearance. The shared appearance is inconclusive. The exact faucet model and parts drawing take priority.

An ExactTemp search result can be accurate about cartridge 1248 and still be the wrong installation sequence for a Roman tub. Moen’s half-inch shower article names a different retaining arrangement. Keep its wrench and tightening details with that shower procedure instead of transferring them to the recessed tub nut.

Sources

• Moen 1248 high-flow Roman-tub product record and 1248B bulk product record, checked October 20, 2026.
• Moen Solutions: How to Identify Your Roman Tub Handle Mechanism; Roman Tub Filler Deck Mount: Lever; Roman Tub Filler Deck Mount: Knob, checked October 20, 2026.
• Moen Solutions: Cartridge Replacement: Roman Tub 1224, 14891 and 1248 Cartridge, nut removal and cartridge seating sections, checked October 20, 2026.
• Moen Solutions: Cartridge Replacement: 1248 Handle Mechanism, separate Splined Stem Extension, White Adapter With Chrome Nut and White Adapter With White Hex Nut articles, checked October 20, 2026.
• Moen Solutions: How To Turn Off The Water Supply To The Faucet; Valve Body Cleaning and Flushing; Roman Tub Handle Lever: Threaded Hub, checked October 20, 2026.
• Moen Solutions: 1248 Cartridge: 1/2-inch Exact Temp Valve; Roman Tub Faucet: Leaking from the Spout, checked October 20, 2026.
• Forum question themes: Reddit askaplumber, Moen cartridge replacement help and Dripping Tub Faucet; Reddit Plumbing, Tub Cartridge Changeout and Removing Moen faucet cartridge. Technical answers checked against Moen, October 20, 2026.
• Moen INS2264, March 2015: hi-flow 1248 two-handle cartridge kit; the 14272 is not included; shut off, relieve pressure and verify the water is off.
• Moen MB107C: an improperly installed retainer nut can let pressure eject the cartridge; avoid cross-threading; check for leaks.
• Amazon Creators API offers, Oct 22, 2026, 11:38 AM EDT: B0028H2VPA and B0CDNLBNSW (Moen 1248B; the second title says pack of 2) and B001DEL0DS (Moen 14272: listing names Moen 1224 and 1248 cartridge nut applications, 1-year limited warranty); all new and in stock. Availability can change.
• CPSC recall search (saferproducts.gov), Oct 22, 2026, 11:38 AM EDT: no recall for Moen cartridges or tools.