For a 4 in. three-hole sink, get the Colony PRO 7075000 (10.0). Holes 6 to 12 in. apart: Colony PRO 7075800. One hole: Delancey 7052107. All three include hoses and a metal drain.
Top pick: Colony PRO 7075000$90.98 at AmazonPrice as of Oct 24, 2026, 5:30 AM EDT
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Which one fits your sink?
Count the holes in your sink or counter, measure from the center of the left hole to the center of the right one, and pick how many handles you want.
Measure before you shop. A centerset faucet sits on a base that spans holes 4 in. apart, center to center. A widespread faucet has a separate spout and two handles, and American Standard rates the Colony PRO 7075800’s flexible hoses for 6 to 12 in. between the outer holes.
A single-hole faucet like the Delancey needs only one opening. American Standard sells a 2000102P escutcheon plate for it, which covers the outer holes on a three-hole sink.
PlumbingPicks spec score out of 10, from American Standard’s spec sheets and product pages, read Oct 24, 2026. It is not a customer rating or our own test.
Best for a 4 in. three-hole sink
Colony PRO 7075000
American Standard Colony PRO 7075000.002 single control centerset bathroom faucet, polished chrome
24 in. braided hoses and a metal pop-up drain in the box
Adjustable hot limit safety stop
Four finishes listed
Cons
Base covers three holes; not for a one-hole sink
Cartridge is a 35 mm part sold by American Standard
4 in. centerset1.2 gpm35 mm ceramic disc3/8 in. compression hosesMetal pop-up drain
Buy it if
Your sink has three holes 4 in. apart and you’d rather have one lever than two.
Skip it if
Your sink has a single hole, or the holes are farther apart than 4 in.
The 7075000 is the faucet I’d put on most bathroom vanities with three holes 4 in. apart, and I’ve used it. It scored 10.0, passing all seven checks.
American Standard’s spec sheet describes a metal body with a metal lever handle and a washerless 35 mm ceramic disc cartridge with an integral hot limit safety stop. That stop limits how much hot water mixes in at full swing, which reduces the risk of scalding; set it once during the install.
In the box you get 24 in. color-coded braided supply hoses with 3/8 in. compression connections and a metal pop-up drain. The hoses connect straight to standard 3/8 in. compression stop valves, so most installs need no extra parts. Flow is capped at 1.2 gallons per minute, and the faucet is EPA WaterSense certified.
The sheet lists it as lead free, at 0.25% or less total lead by weighted average, and certified to NSF/ANSI/CAN 61 and 372, ASME A112.18.1, CSA B125.1 and ANSI A117.1. American Standard’s product page gives a limited lifetime warranty.
Watch the model number. 7075000 has the metal pop-up drain. 7075002 swaps in a 50/50 pop-up drain, 7075004 and 7075005 come without a drain, and 7075006 has a grid drain. The Amazon listing in this guide is 7075000.002, chrome.
Repairs are simple. The repair sheet lists the cartridge as M951483-0070A, the 1.2 gpm aerator as M964479-0070A, and a 0.5 gpm aerator, M922917-0070A, if you need a lower flow. The metal drain assembly is M953450 with the finish code on the end.
The installation guide lists four tools: a Phillips screwdriver, an adjustable wrench, channel locks and plumber’s putty or caulk for the drain. It has you turn off both supplies, feed the faucet and its pop-up cable through the sink’s mounting holes, then assemble the locknuts from below.
Best for holes 6 to 12 in. apart
Colony PRO 7075800
American Standard Colony PRO 7075800.002 two-handle widespread bathroom faucet, polished chrome
6–12 in. widespread1.2 gpm1/4-turn ceramic discs3/8 in. compression hosesMetal pop-up drain
Buy it if
Your sink or counter has three holes with the outer two 6 to 12 in. apart, the common 8 in. widespread layout included.
Skip it if
Your holes are 4 in. apart; the base won’t span them and a centerset model fits better.
The 7075800 is the widespread version of the Colony PRO, and I’ve used it. It scored 10.0 on the seven checks.
American Standard’s spec sheet lists flexible hose connections for 6 to 12 in. installations between the outer holes, so it fits the common 8 in. widespread layout and most odd spacings on older vanities. The spout and two handles mount separately; line them up before you snug the locknuts.
Each handle runs a quarter-turn washerless ceramic disc cartridge. The spout is metal, and the inlet shanks come with 24 in. stainless steel braided supply hoses with 3/8 in. compression connectors. American Standard calls its mounting system Speed Connect: the handles and hoses arrive pre-assembled, which cuts down the work under the sink.
The base 7075800 includes a metal pop-up drain; the 7075802 swaps in a 50/50 pop-up drain. Flow is 1.2 gallons per minute, the faucet is WaterSense certified, and it lists NSF/ANSI/CAN 61 and 372, ASME A112.18.1, CSA B125.1 and ANSI A117.1, with a statement that it meets the Americans with Disabilities Act guidelines. The product page lists a limited lifetime warranty.
The installation guide shows the spout going in first through the center hole with a rubber ring on top and a friction washer and locknut underneath, then the handle valves. The guide also notes the tee assembly changed for products made after May 15, 2020, so match replacement parts to your unit’s date.
Repair parts from the sheet: valve M964005-0070A, aerator M964479-0070A, spout gasket A911758-0070A and attachment nut kit M906617-0070A. The sheet lists the finishes as chrome (002), legacy bronze (278), brushed nickel (295) and matte black (243).
Amazon.com had five left on Oct 24, 2026, with more on the way.
Best for a one-hole sink
Delancey 7052107
American Standard Delancey 7052107.002 single hole single-handle bathroom faucet, polished chrome
Single hole1.2 gpm28 mm ceramic discIntegrated hosesBrass push drain
Buy it if
Your sink or counter has one hole, or you want a single-hole look on a three-hole sink with the deck plate.
Skip it if
Your stop valves sit far below the sink; the integrated 24 in. hoses may not reach without an extension.
The Delancey 7052107 is the pick for a single-hole sink, and I’ve used it. It scored 10.0.
The spec sheet describes a cast brass spout and a washerless 28 mm ceramic disc cartridge with an integral hot limit safety stop. Like the Colony PRO single control, that stop is adjustable and limits how much hot water mixes with cold.
The supply hoses are built in: 24 in. braided hoses with 3/8 in. compression connections. That makes the install fast, but you can’t change the hose length. If your stop valves sit low, check the reach before you buy.
The drain is a brass push pop-up. American Standard says it has fewer parts, installs in less time and needs no adjustment, because there’s no lift rod or linkage.
The installation guide says to drop the drain in from the top of the sink, then install the gasket and mounting nut from below, with plumber’s putty or caulk recommended. Afterward, check that the drain’s foam gasket is fully compressed and not visible.
Codes and standards on the sheet: ANSI A117.1, ASME A112.18.1, CSA B125.1, NSF/ANSI/CAN 61 and 372, plus ADA and EPA WaterSense marks. Flow is 1.2 gallons per minute, and it’s lead free at 0.25% or less. The product page lists a limited lifetime warranty on function and finish.
For a three-hole sink, American Standard lists the 2000102P escutcheon plate as an available accessory. Repair parts from the sheet: cartridge M962682-0070A, aerator M923840-0070A and drain assembly M953456.
Mounting takes one nut. The guide has you seat the seal under the faucet base, feed the hoses and mounting shank through the hole, then add the gasket and mounting nut from below and center the faucet before the final tightening.
Amazon.com had 13 left in chrome on Oct 24, 2026.
Best for replacing old rigid supplies
Colony PRO 7075200
American Standard Colony PRO 7075200.002 two-handle centerset bathroom faucet, polished chrome
1/2 in. male shanks take standard supplies or bull-nose risers
Drops in from the top; quick spin nuts
Metal drain
Cons
Supply hoses not included
Two cartridges to replace instead of one
No hot limit stop listed
4 in. centerset1.2 gpm1/4-turn ceramic discs1/2 in. male shanksMetal drain
Buy it if
You want two handles on a 4 in. three-hole sink, or you’re reusing supply lines that fit 1/2 in. shanks.
Skip it if
You want everything in one box; you’ll need to buy two supply lines.
The 7075200 is the two-handle centerset Colony PRO, and I’ve used it. It scored 8.6, losing one check: it doesn’t come with supply hoses.
That’s also its strength in some bathrooms. The spec sheet lists one-half inch male inlet shanks, and the installation guide says to connect them with 1/2 in. IPS flexible supplies or 3/8 in. O.D. bull-nose risers. If you’re replacing an old two-handle faucet with good supply lines, you may be able to reuse them.
The body is metal with a color-matched underbody and metal lever handles. Each handle turns a quarter-turn washerless ceramic disc cartridge. American Standard says the faucet drops in from the top and quick spin nuts hold it in place, a one-person job.
The base 7075200 includes a metal drain; the 7075202 has a 50/50 pop-up drain and the 7075205 comes without a drain. It’s WaterSense certified at 1.2 gallons per minute and lead free at 0.25% or less, and it lists ANSI A117.1, ASME A112.18.1, CSA B125.1, NSF 61 Section 9 and NSF 372, plus an ADA mark. The product page lists a limited lifetime warranty.
The installation guide calls for a 2 mm hex wrench as well as a Phillips screwdriver, an adjustable wrench, channel locks and plumber’s putty or caulk. It says to secure the faucet with the supplied attachment nuts, hand tight, before connecting the supplies.
Repair parts: the valve is M964005-0070A, the same part number the widespread 7075800 uses, and the aerator is M923840-0070A. Drain assemblies are M953450 for the metal drain and M953465 for the 50/50 version.
Like the widespread 7075800, it has no hot limit stop listed; with two handles you set the mix by hand. Amazon.com had it in stock on Oct 24, 2026.
The layout is decided by the sink, not the faucet. Look under the sink: a centerset faucet’s supply connections sit close together because the handles share one base, while a widespread faucet has a handle valve under each outer hole and hoses or a tee joining them to the spout.
If you’re switching from a widespread to a centerset faucet, the holes won’t line up. Keep the same layout, or plan on a new sink or counter.
Supply lines: what’s in the box
Faucet
Connection
What to buy
Colony PRO 7075000
24 in. braided hoses, 3/8 in. compression
Nothing if your stops are 3/8 in. compression
Colony PRO 7075800
24 in. stainless braided hoses, 3/8 in. compression
Nothing if your stops are 3/8 in. compression
Delancey 7052107
Integrated 24 in. braided hoses, 3/8 in. compression
An extension only if the stops sit low
Colony PRO 7075200
1/2 in. male shanks
Two 1/2 in. IPS flexible supplies or 3/8 in. O.D. bull-nose risers
Three of the four come with hoses that connect straight to standard 3/8 in. compression stop valves. Check yours before you buy: stops that aren’t 3/8 in. compression need adapters. For longer or replacement hoses, see best braided faucet supply lines.
The 7075200 is the odd one out. Its 1/2 in. male shanks take separate supply lines, which means one more purchase but lets you choose the length you need.
Drains: metal, 50/50 or push
Drain
Model suffix
Part number
Notes
Metal pop-up
7075000, 7075200, 7075800
M953450
Metal drain assembly
50/50 pop-up
7075002, 7075202, 7075802
M953465
The repair sheets list it as a plastic drain assembly
Grid drain
7075006
M953455
No stopper
Brass push pop-up
7052107
M953456
Push the cap to open and close
No drain
7075004, 7075005, 7075205
—
Reuse your old drain
The last digit of an American Standard model number usually tells you the drain. If you’re buying online, read the full number in the listing: a 7075002 looks like a 7075000 in photos, but its drain is the plastic 50/50 assembly, according to the repair sheet.
A push drain like the Delancey’s has no lift rod, which means one less hole in the faucet and nothing to adjust under the sink. A grid drain has no stopper at all.
A drip from the spout of a ceramic-disc faucet usually means a worn cartridge or a damaged seal, and replacing the cartridge is the fix. Shut off both stops, open the faucet to drain it, then follow the repair sheet for your model. Bring the old cartridge to compare. Our American Standard faucet parts by number guide covers older models too.
Low flow from an otherwise working faucet is usually a clogged aerator. Unscrew it, rinse out grit and put it back. If you have a two-handle faucet that drips, check which side by closing one stop at a time. For more, see faucet cartridge replacement.
Installing one, step by step
1
Shut off the water
Close both stops; open the old faucet to drain it.
2
Remove the old faucet
Disconnect supplies, drain linkage and mounting nuts.
3
Clean the deck
Scrape old putty so the new base seals flat.
4
Mount the faucet
Feed shanks or hoses through, then snug the nuts from below.
5
Install the drain
Putty or caulk under the flange; tighten the nut from below.
6
Connect and test
Hoses to the stops, open slowly, check for drips.
Each installation guide starts the same way: turn off the hot and cold supplies before you begin. The Colony PRO guides list a Phillips screwdriver, an adjustable wrench, channel locks and plumber’s putty or caulk; the two-handle centerset adds a 2 mm hex wrench. Hand-tighten compression nuts, then add a snug turn with the wrench.
After the first run, take the aerator off and flush the lines for a few seconds to clear any debris from the work. Then put the aerator back and check every joint again with a dry paper towel.
Non-metal drain body and 1/2 in. male shanks with no hoses, per the spec sheet
Metal body and lever handles, ceramic discs, WaterSense on the product page
The Chatfield is a two-handle 4 in. centerset like the 7075200. It passed five of the seven checks. Its spec sheet describes durable non-metal waterways and a non-metal drain body, and like the 7075200 it uses 1/2 in. male inlet shanks, so you buy supply lines separately. It isn’t a bad faucet, but the Colony PRO 7075200 covers the same sink with a metal drain.
How to choose
If you…
Pick
Have three holes 4 in. apart and want one lever
Colony PRO 7075000
Have three holes 4 in. apart and want two levers
Colony PRO 7075200
Have three holes 6 to 12 in. apart
Colony PRO 7075800
Have one hole
Delancey 7052107
Want anti-scald protection built in
Colony PRO 7075000 or Delancey 7052107
Want everything in one box
Any but the 7075200
Match the layout first, then the handle count, then the details. The finish only matters for matching the towel bar and drain; every pick here comes in chrome, and most in brushed nickel and other finishes. For brands beyond American Standard, see best bathroom faucet.
Questions people ask
Are American Standard bathroom faucets good?
The four here are lead free, WaterSense certified and use ceramic disc cartridges, per American Standard’s spec sheets.
What warranty do American Standard bathroom faucets have?
Their product pages list a limited lifetime warranty for these models.
Do American Standard faucets come with a drain?
The base models here do; suffixes like 7075004 or 7075205 come without one.
Do American Standard faucets come with supply lines?
The 7075000, 7075800 and Delancey include hoses; the 7075200 needs separate supply lines.
What cartridge does the Colony PRO single handle use?
M951483-0070A, a 35 mm ceramic disc cartridge, per the repair sheet.
How do I fix a dripping American Standard bathroom faucet?
Replace the cartridge for your model, listed on its repair sheet.
How do I remove the aerator?
Unscrew it from the spout tip; rinse out grit and refit it.
Can a single-hole faucet go on a three-hole sink?
Yes, with a deck plate; the Delancey uses the 2000102P plate.
What does 1.2 gpm mean?
It’s the maximum flow, 1.2 gallons per minute, listed on each spec sheet.
What’s the difference between 7075000 and 7075002?
The drain: 7075000 has a metal pop-up drain, 7075002 a 50/50 pop-up drain.
How I pick and score
Why trust me
I’m Isaac Daniels, a licensed journeyman plumber in Georgia (license #JP507711), and I’ve used these picks. Every spec here comes from American Standard’s spec sheets, installation guides, repair sheets and product pages, read on Oct 24, 2026.
How I pick
One pick per sink layout, all American Standard bathroom faucets.
New and in stock on Amazon, sold by Amazon.com, on Oct 24, 2026.
Each scored on the same seven checks below; every pick reaches 7.0.
Prices come from Amazon’s API with the time they were read.
Check (pass = 1)
Where it comes from
EPA WaterSense certified
Spec sheet or product page
Lead free (0.25% or less) with NSF 372 listed
Spec sheet
Ceramic disc cartridge
Spec sheet
Metal drain included
Spec sheet model list
Supply hoses included
Spec sheet
Metal body or spout
Spec sheet
Limited lifetime warranty
Product page
Score = checks passed ÷ 7 × 10. It’s the PlumbingPicks spec score, built from published facts. It isn’t a customer rating, an Amazon rating or a hands-on test.
Sources
American Standard spec sheets: Colony PRO 7075000-006 (11/23), Colony PRO 7075200-206 (rev. 2/20), Colony PRO 7075800-802 (11/23), Delancey 7052107 (3/23), Chatfield 7413201 (4/23).
American Standard installation guides M965766 (Colony PRO single control), M965761 (Colony PRO centerset), M965765 (Colony PRO widespread), M965983 (Delancey).
American Standard repair parts sheets RP 70750XX, RP 707520X, RP 707580X and the Delancey parts sheet M965983.
American Standard product pages for each model, americanstandard-us.com, read Oct 24, 2026.
Amazon product data for B01N1G97JR, B01N53C99P, B01N64QNXP, B07PZXFCX6 and B01KGRY2JG, read through the Creators API on Oct 24, 2026.
