Best Bar Sink Faucets (2026)

A bar sink faucet is a smaller faucet for a wet bar, a prep sink on an island, or a second sink in a basement or outdoor kitchen. It is picked with two checks the main kitchen faucet rarely needs: how many holes the small sink has, and whether the faucet’s height and reach suit a small bowl.

As an Amazon Associate I earn from qualifying purchases. How this site earns

In my 7 years of experience, these are the products I'd install.

The short answer

For most bar and prep sinks, buy the Moen Arbor 5995SRS. It is a pulldown on a 68 in. hose that installs through 1 or 3 holes, and Moen backs it with a lifetime limited warranty. For a simple spout with more flow, the KRAUS Oletto KPF-2822SFS. For a two-hole bar sink, the Moen 4903. Count the holes and measure the bowl before you buy.

Most bar sinks
Moen Arbor 5995SRS. A pulldown bar faucet for 1 or 3 holes.
Simple spout, more flow
KRAUS Oletto KPF-2822SFS. Stream only, at 1.8 gpm.
Two-hole bar sink
Moen 4903 Chateau. Two handles, inlets 4 in. apart.
Modern or gold pulldown
Moen Align 5965BG. The Arbor’s Moen parts in a modern style.
Main sink instead
See my best kitchen faucet guide.

Bar sink faucets compared

Every number below is the maker’s, read from the documents in Sources on October 2, 2026. Flow is the maker’s rating at 60 psi. Height is overall; spout height is from the deck to the outlet.

How the four bar sink faucets differ in holes, size, deck thickness and flow
Bar faucetHoles (maker)Height / spout height / reachMax deckFlowSprayHandle
Moen Arbor 5995SRS1 or 3 (escutcheon sold separately); 1-1/2 in. min14-3/8 / 8-3/8 / 6-9/16 in.2-1/2 in.1.5 gpmPulldown, 68 in. hoseSingle, right only (Moen page)
KRAUS Oletto KPF-2822SFS1; 1-3/8 in. min12 / 8 / 6-1/2 in.2-3/4 in.1.8 gpmNone, stream onlySingle, turns forward
Moen 4903 Chateau2, 4 in. apart (my arithmetic)10-1/2 / 7-1/8 / 4-9/16 in. (1.5 gpm version)1 in.1.5 gpmNoneTwo blade handles
Moen Align 5965BG1 (3 with optional escutcheon); 1-1/2 in. min13-3/4 / 6-7/8 / 6-3/4 in.2-1/2 in.1.5 gpmPulldown, 68 in. hoseSingle, plan for right

On October 3, 2026, every listing named here was sold by Amazon.com and in stock or shipping within 2 to 3 days. Seller and stock can change, and the four picks below are carried as comparison-only entries on this page, with no buy link and no price, until each pick’s current Amazon offer is verified again.

How to choose a bar sink faucet

Count the holes and measure them

Bar sinks come with one, two or three holes, or none if the faucet goes through the countertop. A single-hole faucet fits one hole. Moen says the Arbor installs through 1 or 3 holes, and both Moen pulldowns take Moen’s optional 3-hole escutcheon, 141002, which the listings say is sold separately. A two-hole bar sink needs a two-handle faucet like the Moen 4903, whose inlets sit 4 in. apart on Moen’s drawing (my arithmetic).

Then check the hole size: Moen calls for at least 1-1/2 in. and KRAUS at least 1-3/8 in. More on hole layouts in kitchen faucet hole size.

Match the faucet to the sink size

A bar bowl is small, so reach and height matter more than on a main sink. Reach is how far the outlet sits from the faucet’s center. Moen lists 6-9/16 in. for the Arbor, KRAUS 6-1/2 in. for the Oletto, and Moen 4-9/16 in. for the 1.5 gpm version of the 4903. Plumber’s note: measure from the center of your faucet hole to the drain.

A reach close to that number puts the stream near the drain instead of on the back wall of the bowl. Then measure up. The Arbor is 14-3/8 in. tall, so check it against any shelf, cabinet or window above a wet bar.

Deck thickness

Bar faucets often mount through a stone countertop instead of a thin sink deck. Moen allows 2-1/2 in. on the Arbor and Align, and KRAUS 2-3/4 in. on the Oletto. The Moen 4903 allows only 1 in. on its 1.5 gpm version and 3/4 in. on its 2.0 gpm version. Measure the counter plus anything under it.

Hot water at a bar sink

Many wet bars have only a cold line or sit far from the water heater. Plumber’s note: every faucet here is made for hot and cold supplies, and a single-handle faucet on a cold-only line still works, but turning the handle to hot does nothing. If you want hot water at a remote bar sink, see best under-sink water heaters.

Supply connections

The Moen pulldowns come with flexible supply lines with 3/8 in. compression fittings, and KRAUS builds in 30 in. nylon lines with 3/8 in. compression ends. The Moen 4903 has 1/2 in. NPT inlet shanks that Moen says accept 3/8 in. ball nose connections, so plan on a pair of supply lines; Moen’s sheet does not list them as included. Lines are covered in best braided faucet supply lines.

Picks by need

Four faucets, each for a different bar sink problem. Every size comes from the maker’s own sheet for that exact model.

  1. Top pick: pulldown bar faucet

    Moen Arbor 5995SRS

    5995SRS · Spot Resist Stainless

    Best for
    Most bar and prep sinks. A real pulldown spray in a smaller size, on one or three holes, with a 68 in. braided hose and Reflex docking.
    Skip it if
    Your sink has two holes, or a shelf or cabinet sits less than 14-3/8 in. above the deck.

    Comparison only. No buy link and no price for this pick on this page.

    Full specs and the tradeoff
  2. Best simple single-hole bar faucet

    KRAUS Oletto KPF-2822SFS

    KPF-2822SFS

    Best for
    A simple bar faucet with more flow: 1.8 gpm, stream only, and a handle that turns 90° forward for a tight backsplash.
    Skip it if
    You want a sprayer, or your mounting hole is under 1-3/8 in.

    Comparison only. No buy link and no price for this pick on this page.

    Full specs and the tradeoff
  3. Best two-handle bar faucet

    Moen 4903 Chateau

    4903

    Best for
    A two-hole bar sink: separate hot and cold mini blade handles, with inlets 4 in. apart.
    Skip it if
    Your deck is over 1 in. thick, or you need reach: at 4-9/16 in. it is the shortest here.

    Comparison only. No buy link and no price for this pick on this page.

    Full specs and the tradeoff
  4. Best modern pulldown

    Moen Align 5965BG

    5965BG · Brushed Gold

    Best for
    A modern or gold bar faucet with the same Moen parts as the Arbor: the 1255 cartridge, Reflex docking and Power Clean spray.
    Skip it if
    You need the handle on the left: Moen’s product page lists right only.

    Comparison only. No buy link and no price for this pick on this page.

    Full specs and the tradeoff

Each pick, up close

The tradeoff, the install numbers and what each maker says. Where two of a maker’s own documents disagree, both numbers are here.

Top pick: pulldown bar faucet

Moen Arbor 5995SRS Pulldown Bar Faucet

Single handle, pulldown · 1 or 3 holes, 1-1/2 in. minimum (3-hole escutcheon 141002 sold separately) · 14-3/8 in. tall, 8-3/8 in. spout height, 6-9/16 in. reach (Moen drawing) · 2-1/2 in. max deck · 68 in. braided hose · Reflex docking · 1.5 gpm at 60 psi · 1255 Duralast cartridge · two check valves · 3/8 in. compression supply lines · handle on the right only · lifetime limited warranty to the original homeowner

The Arbor is the bar faucet to buy for most bar and prep sinks. Moen calls it a high arc pulldown prep/bar faucet, and it brings kitchen features to a small sink: a 68 in. braided hose, Moen’s Reflex docking, and stream or spray in the pulled-out or docked position. Moen’s sheet says it installs through 1 or 3 holes of at least 1-1/2 in.

The 3-hole escutcheon, part 141002, is optional, and the Amazon listing says it is sold separately. The deck can be up to 2-1/2 in. thick. Moen’s product page lists Power Clean, which Moen says gives 50 percent more spray power than most of its pulldown and pullout faucets without it. It also notes that the spray function requires continuous button pressure.

Size is the thing to check on a bar sink. Moen’s drawing shows the faucet 14-3/8 in. tall with the spout outlet 8-3/8 in. above the deck and 6-9/16 in. of reach. Flow is limited to 1.5 gpm at 60 psi. The cartridge is Moen’s 1255 Duralast, and Moen says the backflow protection is two independent check valves.

Moen’s product page lists the handle as right side only, so put the faucet where a right-hand lever clears the backsplash. The warranty is lifetime limited against leaks, drips and finish defects to the original homeowner, 10 years in a multifamily building and 5 years commercial. The SRS suffix is Moen’s Spot Resist Stainless, one of five finishes on Moen’s page.

What I like

  • Pulldown spray on a 68 in. hose, per Moen
  • One or three holes, with the escutcheon
  • 1255 cartridge is a common Moen part
  • Two check valves for backflow, per Moen

Tradeoffs

  • 3-hole escutcheon sold separately
  • 14-3/8 in. tall; check any shelf or cabinet above
  • Spray needs continuous button pressure, per Moen
  • Handle on the right only, per Moen’s page

Verdict: The bar faucet for most prep and wet bar sinks: a real pulldown spray in a smaller size, on one or three holes.

Best simple single-hole bar faucet

KRAUS Oletto KPF-2822SFS Single-Handle Bar Faucet

Single handle, gooseneck spout, stream only · 12 in. tall, 8 in. spout height, 6-1/2 in. reach · 360° swivel · 1.8 gpm at 60 psi · 25 mm ceramic cartridge · 30 in. integrated nylon waterlines, 3/8 in. compression · 1-3/8 in. minimum hole · 2-3/4 in. max deck · handle turns 90° forward · KRAUS Limited Lifetime Warranty

The Oletto is the plain bar faucet: one handle, one gooseneck spout, no sprayer. KRAUS lists it 12 in. tall with an 8 in. spout height and 6-1/2 in. of reach, swiveling 360°. It flows 1.8 gpm at 60 psi, the most of the four picks as listed in the table; the 2.0 gpm version of the Moen 4903 would be higher.

The handle turns 90° forward instead of to the side. KRAUS says that allows installation in spaces with limited backsplash clearance, which is common behind a bar sink. The waterlines are 30 in. nylon lines built in, with 3/8 in. compression ends.

For the install, KRAUS’s manual calls for a 1-3/8 in. minimum hole and a countertop up to 2-3/4 in. thick. It says to flush the faucet by running water for 30 seconds with the aerator off. Its care steps are strict: rinse with clean water, dry with a soft cloth, and do not clean with soaps, acid, polish, abrasives or harsh cleaners.

The warranty covers the structure and finish while the original buyer lives in the home where it was installed, when bought from an authorized KRAUS dealer. The warranty does not say which sellers are authorized, so if that matters to you, ask KRAUS (1-800-775-0703) before you buy. It covers the cartridge for 5 years, and the sprayhead parts and supply hoses, including nylon lines, for 1 year. KRAUS’s page lists six finishes.

What I like

  • 1.8 gpm, the highest flow in the table
  • Forward-turning handle for a tight backsplash, per KRAUS
  • Single hole, 1-3/8 in. minimum, per KRAUS
  • Lifetime structure and finish warranty, per KRAUS

Tradeoffs

  • Stream only; no sprayer
  • Built-in nylon lines covered for 1 year, per KRAUS
  • Warranty requires an authorized KRAUS dealer; confirm your seller with KRAUS
  • No soaps or cleaners on the finish, per the manual

Verdict: The pick for a simple bar faucet with more flow and a handle that clears a tight backsplash.

Best two-handle bar faucet

Moen 4903 Chateau Two-Handle Bar Faucet

Two mini blade handles with hot and cold indicators · two holes, inlets 2 in. each side of the spout (4 in. apart, my arithmetic) · 10-1/2 in. tall, 7-1/8 in. spout height, 4-9/16 in. reach, 1 in. max deck (1.5 gpm version, Moen drawing) · 1.5 gpm at 60 psi · 1/2 in. NPT inlets accept 3/8 in. ball nose connections · lifetime limited warranty to the original homeowner

The 4903 is the classic two-handle bar faucet for a sink with two holes. Moen’s product page lists it as a two-hole faucet, and its drawing puts the hot and cold inlets 2 in. each side of the spout, so the holes are 4 in. apart (my arithmetic). The handles are mini blades with hot and cold color indicators, and the inlet shanks accept 3/8 in. ball nose supply connections.

The 1.5 gpm version on Moen’s sheet, the one Moen’s product page describes, is 10-1/2 in. tall with the spout outlet 7-1/8 in. above the deck and 4-9/16 in. of reach. Flow is limited to 1.5 gpm at 60 psi, and the deck can be up to 1 in. thick.

Moen’s sheet shows two versions, and the numbers differ. The second version is 2.0 gpm, 8 in. tall, with a 6 in. spout height, 3-1/4 in. of reach and a 3/4 in. maximum deck. Moen’s product page lists 1.5 gpm and a 10.50 in. spout height, which matches the 1.5 gpm version’s overall height, not its spout height.

The Amazon listing says 8 in. spout height and 3-1/2 in. reach. Neither matches a drawing exactly, but those numbers sit closest to the 2.0 gpm version (8 in. tall, 3-1/4 in. reach), so the faucet you receive may be that one. Both versions use the same two inlets 4 in. apart, so the hole fit does not change.

Measure the faucet you receive before you set it under a shelf. The warranty is lifetime limited against leaks, drips and finish defects to the original homeowner.

What I like

  • Fits a two-hole bar sink
  • Separate hot and cold handles with color indicators
  • 1/2 in. NPT inlets take standard 3/8 in. ball nose supplies, per Moen
  • Lifetime limited warranty to the original homeowner

Tradeoffs

  • Listing’s height and reach sit closest to the 2.0 gpm version
  • Shortest reach here
  • Thin deck limit: 1 in. (1.5 gpm) or 3/4 in. (2.0 gpm version)
  • No sprayer

Verdict: The pick for a two-hole bar sink, once you confirm the height of the version you receive.

Best modern pulldown

Moen Align 5965BG Pulldown Bar Faucet (Brushed Gold)

Single handle, pulldown · 1 hole, 1-1/2 in. minimum (3-hole escutcheon 141002 optional) · 13-3/4 in. tall, 6-7/8 in. spout height, 6-3/4 in. reach (Moen drawing) · 2-1/2 in. max deck · Power Clean spray · 68 in. braided hose · Reflex docking · 1.5 gpm max at 60 psi · 1255 Duralast cartridge · two check valves · lifetime limited warranty to the original homeowner

The Align is the Arbor’s modern sibling, and the one to buy in brushed gold. Moen’s sheet gives it the same core parts: Reflex docking, a 68 in. braided hose, the 1255 Duralast cartridge, two check valves and 1.5 gpm at 60 psi. It adds Power Clean on the sheet itself. It is a little shorter than the Arbor at 13-3/4 in., with the spout outlet 6-7/8 in. above the deck and 6-3/4 in. of reach. It installs through 1 hole of at least 1-1/2 in., and Moen lists the 3-hole escutcheon 141002 as an option.

One point where Moen’s own documents differ: the sheet says the 360° spout gives the ability to install the handle on either side, but also says the faucet is designed for the handle on the right. Moen’s product page lists right only. Plan for a right-hand handle. The warranty matches the Arbor’s: lifetime limited to the original homeowner, 10 years multifamily and 5 years commercial.

What I like

  • Brushed gold finish with Moen’s lifetime finish warranty
  • Power Clean spray, per Moen’s sheet
  • Same 1255 cartridge as the Arbor
  • Slightly shorter than the Arbor

Tradeoffs

  • Plan for a right-hand handle (Moen’s sheet and page differ)
  • 3-hole escutcheon is an option, not included
  • 1.5 gpm
  • Does the same job as the Arbor in a different style

Verdict: The pick for a modern or gold bar faucet with the same Moen parts as the Arbor.

Before you buy

  1. Count and measure the holes

    Note how many, the diameter, and the distance between them if there are two.

  2. Measure the bowl

    Measure from the faucet hole to the drain, and compare it with the reach.

  3. Measure up

    Measure from the counter to any shelf, cabinet or window above the sink.

  4. Check the deck

    Measure the counter or sink thickness where the faucet mounts.

  5. Check the supply

    Look for hot and cold stops with 3/8 in. compression outlets, and note whether there is a hot line at all.

Installing a bar sink faucet

KRAUS’s manual starts the job the way most do: turn off the hot and cold water at the angle stops and open the old faucet to release pressure before you remove it. Set the new faucet through the hole with its washers, tighten the mounting nut from below without overtightening, and connect the supply lines to the stops.

KRAUS says to turn the stops on and check for leaks with the faucet still off, then remove the aerator and run water for 30 seconds to flush debris. Plumber’s note: on the Moen pulldowns, the hose loops under the sink, so keep storage clear of it. The full job is in how to install a faucet.

Plumber’s note: bar sink cabinets are small, and a basin wrench saves time on the mounting nut. If the stops will not shut off fully, replace them before the new faucet goes in; see best under-sink shut-off valves.

Questions buyers ask

What size faucet fits a bar sink?

Check three numbers on the spec sheet: height, spout height and reach. The Moen Arbor is 14-3/8 in. tall with 6-9/16 in. of reach, the KRAUS Oletto 12 in. tall with 6-1/2 in., and the 1.5 gpm Moen 4903 10-1/2 in. tall with 4-9/16 in. Measure from the faucet hole to the drain and the far wall of your bowl, and from the counter to any shelf or cabinet above, before you pick.

Can I put a bar faucet on a 3-hole sink?

Yes, with a plate. Moen says the Arbor installs through 1 or 3 holes, and both Moen pulldowns take the optional 3-hole escutcheon 141002, which is sold separately. The KRAUS Oletto is single-hole. The Moen 4903 is a two-handle faucet for two holes. Measure your holes first; my kitchen faucet hole size guide shows how.

Do I need a pulldown on a bar faucet?

Only if you rinse at that sink. A pulldown like the Moen Arbor or Align adds a spray on a 68 in. hose for rinsing glasses and produce. A plain spout like the KRAUS Oletto or Moen 4903 is fine for filling and hand washing, and KRAUS rates the Oletto at 1.8 gpm, the highest flow in the table above.

What is the difference between a bar faucet and a kitchen faucet?

Mostly size. Moen calls the Arbor and Align prep/bar faucets and says their high arc spout gives “the perfect height and reach for prep sinks.” The connections are the same 3/8 in. compression supplies a kitchen faucet uses. For a main sink, see my best kitchen faucet guide.

How do I hook up a bar faucet?

Turn off the hot and cold stops, set the faucet through the hole, tighten the mounting nut from below, and connect the supplies to the stops. KRAUS says to check for leaks with the stops on before you turn the faucet on, then flush it for 30 seconds with the aerator off. A bar sink with only a cold line can still take a single-handle faucet, but you will get cold water only. The full job is in how to install a faucet.

How I chose

Plumbing Picks is written by a licensed Georgia journeyman plumber. Every spec here comes from the maker documents linked below or the Amazon listings named on this page. On October 3, 2026, every listing named here was sold by Amazon.com and in stock or shipping within 2 to 3 days. If you buy through a link I may earn a commission at no extra cost to you. Nobody pays to be included here. More on who writes this and how I pick.

I send an occasional note when a new guide goes up — repairs worth doing yourself, and the parts that actually last. No spam, no course funnel; written by a licensed Georgia plumber.

Sources

Bottom line

A bar sink faucet is chosen by holes and size. The Moen Arbor 5995SRS is the pulldown for most bar and prep sinks. The KRAUS Oletto is the simple single-hole spout with the highest flow in the table, the Moen 4903 fits a two-hole sink, and the Moen Align is the modern pulldown in brushed gold. Count and measure the holes, compare the reach with your bowl, and check the height above before you order.