Best towel bar

The Genta LX is the towel bar I’d hang in most bathrooms, and I’ve used it. Moen’s technical specification says the 24-inch bar is constructed of zinc and stands 3-1/4 inches off the wall on bases 1-3/4 inches across.

What sets it apart is the install sheet. Moen lists the hardware kit: 4 plastic toggle anchors, 4 wood or anchor screws, 1 plastic pin and 1 hex wrench. It also lists the tools: a Phillips screwdriver, drill, 1/4-inch and 5/16-inch bits, hammer, level and tape.

For drywall, Moen has you tape the template level on the wall, drill two 5/16-inch holes at each post, fold and insert the toggle anchors, then tap the plastic pin in to open each one. For a stud, use the wood screws only.

For masonry, the sheet says to drill a 1/4-inch pilot hole and tap the anchors flush. The mounting posts go on with the notch facing down, and the bar’s end posts slide over them and lock with set screws on the bottom.

Moen’s page lists a limited lifetime warranty. Its spec sheet adds the care rule: clean only with a soft damp cloth, dry it well, and don’t use commercial or abrasive cleaners.

It didn’t lose a point on our checks. The one catch is finish: the brushed nickel listing showed only an available-date on Oct 23, 2026, so the pick here is the chrome BH3824CH. Moen also makes it in matte black.

My call: the toggle anchors are the reason it’s the pick. A toggle opens behind the drywall and spreads the load there, which matters when both posts miss a stud.

Moen’s template also marks the 18-inch bar, the hand towel bar and the paper holder from the same suite, so you can lay out a whole wall with one sheet.

The Iso is the one I’d pick for a modern bathroom, and I’ve used it. Moen describes the Iso collection as a telescoping, machined-metal design, and its spec sheet gives the details: zinc posts and an aluminum bar.

The 24-inch bar measures 26-1/2 inches overall, sits 3-1/8 inches off the wall, and has round bases 2-1/2 inches across. Moen sells it in chrome, brushed nickel, matte black and bronzed gold; the pick here is brushed nickel.

Moen’s product page lists the install features: an included template and mounting hardware, and a stamped steel mounting bracket. It also calls the bar corrosion resistant and backs it with a limited lifetime warranty.

The care instructions match the Genta: clean with a soft damp cloth, wipe it dry, and avoid commercial or abrasive cleaners.

Where it lost a point: the documents on Moen’s product page for the DN0724 were the spec sheet and CAD files. I couldn’t find a published install sheet with wall-type steps, so it scored 7 on that check.

That doesn’t mean it’s hard to install, just that you’ll read the steps when the box arrives instead of before. The mounting method follows the same idea as other Moen bars: a bracket on the wall and the post over it.

My call on the aluminum bar: it keeps the bar light, which puts less pull on the anchors. That’s a good thing on drywall.

Moen’s spec sheet lists four stock numbers for the same bar, DN0724CH, DN0724BN, DN0724BL and DN0724BZG, so you can match chrome, brushed nickel, matte black or bronzed gold fixtures without changing the mount.

It’s the one I’d choose when looks come first and you’ll be screwing at least one post into a stud.

Delta’s Trinsic is the round bar I’d pick, and I’ve used it. Delta’s spec sheet shows a 5/8-inch round bar, 2-1/4-inch round bases, a 24-inch bar length and 26-1/4 inches overall, sitting 3-5/16 inches from the wall.

The warranty on the spec sheet is specific: a lifetime limited warranty on parts and finish for homeowners, or 10 years for multi-family residential and 5 years for other commercial uses.

Delta’s standard specifications say wood blocking is preferable behind the wall. Without it, Delta suggests plastic or lead anchors for tile or masonry, and toggle bolts for plaster or drywall. Mounting hardware and a template come in the box.

The maintenance and installation sheet goes further. Delta says to mount at least one end into a stud if possible, and gives 25 inches as the bracket spacing for the 24-inch model. Into a stud, drill 1/8-inch holes and use the two screws provided.

On ceramic tile, Delta says to put the holes on a grout line if you can, use a 1/4-inch carbide bit, and push the anchors in flush. It also says sheetrock or hollow doors may need molly or toggle bolts, which aren’t included.

Where it lost a point: Delta’s documents don’t say what the bar is made of. Delta’s page does say its Brilliance finishes resist abrasion and discoloration better than traditional brass or chrome.

Champagne bronze is the finish on this listing. Delta lists chrome, matte black, polished nickel, stainless and Venetian bronze too.

Delta’s install sheet also lists the whole Trinsic bar family with bracket spacing: 13 inches for the 12-inch bar, 19 for the 18-inch, 25 for the 24-inch and 31 for the 30-inch.

My call: buy a pair of toggle bolts with it if your wall is hollow drywall, before you start drilling.

Delta’s Lahara is the bar I’d pick for thick towels, and I’ve used it. Delta’s spec sheet shows it standing 3-3/4 inches off the wall, the deepest of the four, with a 3/4-inch round bar on 2-inch bases.

The bar is 24 inches long and 26 inches overall. Delta’s page says it coordinates with the Lahara bath collection; the finish on this listing is Delta’s Brilliance stainless.

Its warranty and mounting notes match the Trinsic: a lifetime limited warranty on parts and finish for homeowners, mounting hardware and a template in the box, and Delta’s fastener advice by wall type.

Delta’s install sheet for the 73824 again says to mount at least one end into a stud if you can find one, drill 1/8-inch holes for the provided screws in a stud, and use a 1/4-inch carbide bit on tile, ideally on a grout line.

The same sheet repeats the warning that matters most for a towel bar: sheetrock or hollow doors may need molly or toggle bolts, which are not included.

Where it lost a point: like the Trinsic, Delta’s documents don’t state the material, so it scored 7 on that check.

Delta’s product page says all mounting hardware and easy-to-follow instructions come in the box, aimed at the weekend DIYer, and its spec sheet points to deltafaucet.com for the full warranty terms.

My call on depth: an extra half inch off the wall lets a folded bath sheet dry with air on both sides. It also means the bar sticks out farther, so mind door swings.

Its thicker 3/4-inch bar is also easier to grab, which some people like near a tub. A towel bar isn’t a grab bar, though; see the safety note below.