Best water softener cleaner

I pick the best water softener cleaner by water type: Res Care for routine resin care, Rust Out for iron, and the maker's cleaner when a warranty requires it.

As an Amazon Associate I earn from qualifying purchases. How this site earns

Updated November 15, 2026

Pro Products Res Care 4 oz four-pack
Res Care pre-measured bottles. Product photo from Amazon.

Short answer

Top pick: Res Care. Iron in your well water? Rust Out.

Pro Products Res Care water softener cleaner 4 oz bottles
Top pick: Res Care 4 oz$24.87 at AmazonPrice as of Nov 22, 2026, 9:30 AM EST
Check it on Amazon

Find the cleaner for your softener

Find your fit

Choose your softener and water type to get a starting point.

I use this as a starting point. It cannot replace a water test, your product label or an in-person check. For a cabinet softener, follow the cleaner's periodic-cleaning directions.

My picks

Pro Products Res Care water softener cleaner, 1 gallon jugs
Best for big resin tanks and frequent doses

Res Care 1 gallon 3-pack

$62.91 at Amazon
Check it on Amazon
Price as of Nov 22, 2026, 9:30 AM EST
Details ↓
Iron OUT rust stain remover powder bottles
Best for iron plus rust stains

Iron OUT powder 2-pack

$20.00 at Amazon
Check it on Amazon
Price as of Nov 22, 2026, 9:30 AM EST · low stock then
Details ↓

Match the cleaner to your water first

Salt regenerates the resin. It doesn't clear out iron, manganese and silt. Which cleaner you need depends on what's in your water and whose softener you own.

City water, no iron problem

OUT Filter Mate's listing calls it a cleaner for city water and light iron under 1 ppm. Res Care also works here at 4 oz per cubic foot of resin. [1]

Well water with iron

Pro Products and Summit Brands both print the same line: softeners on iron-bearing water need their iron cleaner as preventive care. That's Rust Out or Iron OUT.

A Morton softener in its first five years

Morton extends the parts warranty to 5 years only with Morton MWSC, one bottle every four months. Its manual says other additives don't count. [1]

An EcoPure softener

EcoPure says using EPCL as recommended can stretch its 1-year softener warranty up to 5 years, with details set by model. [6]

An all-in-one cabinet softener

Rust Out and Iron OUT labels say cabinet models get periodic cleaning only, using the first-application method. Don't layer powder into the salt.

A softener that stopped regenerating

Pro Products says Res Care won't fix mechanical faults, failed parts or an undersized system. Find the fault first in my softener not regenerating guide.

Res Care 4 oz. one pre-measured dose for a 1 cubic foot tank

Best for most softeners

Res Care 4 oz 4-pack

Pro Products Res Care water softener cleaner, 4 oz bottles, 4-pack (RK04E) [1]

RK04E, four 4 oz bottles
$24.87
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Each bottle is one dose for 1 cu ft of resin
  • Maker lists NSF/ANSI/CAN 60
  • Works on iron, manganese and silt
  • Pours straight into the brine well
  • Pairs with the Easy Feeder

Cons

  • Strong acid, pH under 1
  • Needs gloves and eye protection
  • Four doses per pack
RK04ELiquid4 oz bottles4 oz per cu ftMaker-listed NSF 60

Buy it if

Your softener holds about 1 cubic foot of resin and you want a measured dose with no cup to rinse. [1]

Skip it if

Your well water carries heavy iron (start with Rust Out) or you own a Morton softener still under its extended warranty (use MWSC).

The tradeoff: Strong acid, pH under 1 [7]

Res Care is my top pick because it's the cleaner Pro Products built the dose rule around: 4 oz, or 1/2 cup, per cubic foot of softener resin. Pro Products' directions add that most home softeners hold about 1 cubic foot. That makes one of these bottles one full dose for a typical tank. [1]

What it does, per Pro Products: salt handles hardness, but it doesn't remove the iron, manganese, silt and metal buildup that fouls the resin bed. Res Care is made to clean those out, which the maker says helps restore flow rates and efficiency.

The directions are short. Pour the dose straight into the brine well, the tube inside the salt tank. If your softener has no brine well, pour it into the salt tank when the salt is low. Then start a manual regeneration.

For upkeep, Pro Products says to add the same 4 oz per cubic foot at each regeneration. The Amazon listing puts it the same way for this pack: one whole 4 oz bottle before each regeneration. [1]

Read the safety sheet before you open one. Pro Products' SDS lists 10 to 30% phosphoric acid and a pH under 1, with the signal word Danger. It can cause severe skin burns and eye damage, so wear gloves and eye protection when you pour. [7]

Pro Products also says it's NSF certified to NSF/ANSI/CAN Standard 60 for drinking water additives. Of the seven picks, only the two Res Care packs list that certification. [1]

If you taste or smell it in the tap water afterward, the maker's fix is to regenerate again, then run the nearest cold soft-water tap until it clears.

Know the limit. Pro Products' own FAQ says Res Care won't fix mechanical problems, failed parts or an undersized softener. It cleans fouled resin. That's all.

My call: for a standard softener on city water or mild well water, this is the cleaner to start with. The pre-measured bottle takes the guessing out of the dose.

The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [1] [7]

How much Res Care your softener needs

Pro Products sets the dose by resin volume: 4 oz per cubic foot. Here it is worked out for common tank sizes. [1]

Resin in your tankRes Care per dose4 oz bottlesDoses in a 1 gallon jug
0.5 cu ft2 oz (1/4 cup) [16]Half a bottle64 [16]
0.75 cu ft3 oz (3/8 cup) [16]Three quarters42 [16]
1 cu ft4 oz (1/2 cup) [16]1 bottle [16]32 [16]
1.5 cu ft6 oz (3/4 cup) [16]1 and a half [16]21 [16]
2 cu ft8 oz (1 cup) [16]2 bottles [16]16 [16]
2.5 cu ft10 oz (1-1/4 cups) [16]2 and a half [16]12 [16]
3 cu ft12 oz (1-1/2 cups) [16]3 bottles [16]10 [16]

Dose rule from Pro Products' Res Care directions, checked November 15, 2026. Doses per gallon are 128 oz divided by the dose, rounded down. The bottle and jug math is my own.

Don't know your resin volume? Pro Products says to check the owner's manual. My resin by tank size guide shows how to work it out from the tank.

The last column is why the gallon pick exists. A 2 cubic foot tank uses 8 oz a dose, so a pack of four 4 oz bottles covers just two regenerations. A gallon covers 16. [1]

Res Care 1 gallon. the same cleaner for bigger tanks

Best for big resin tanks and frequent doses

Res Care 1 gallon 3-pack

Pro Products Res Care water softener cleaner, 1 gallon, 3-pack (RK02B) [1]

RK02B, three 1 gallon jugs
$62.91
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • 384 oz in the pack
  • 32 doses per gallon at 1 cu ft
  • Maker lists NSF/ANSI/CAN 60
  • Refills an Easy Feeder bottle
  • Same directions as the 4 oz

Cons

  • You measure every dose
  • Strong acid, pH under 1
  • Keep it in the original jug
RK02BLiquid1 gal. jugs4 oz per cu ftMaker-listed NSF 60

Buy it if

Your tank holds 1.5 cubic feet of resin or more, you dose at every regeneration, or you run an Easy Feeder. [1]

Skip it if

You clean a 1 cubic foot softener a few times a year. The 4 oz bottles are simpler. [1]

The tradeoff: You measure every dose

This is the same Res Care, sold by the gallon. The listing gives the same directions as Pro Products: pour 4 oz per cubic foot of resin down the brine well, then manually regenerate the softener to clean the resin. [1]

The gallon makes sense in three cases. You have a big tank, since a 2 cubic foot softener takes 8 oz a dose. You dose at every regeneration, which Pro Products lists as the upkeep method. Or you feed it automatically with an Easy Feeder. [1]

The math is simple. A gallon is 128 oz. At 4 oz a dose, that's 32 doses for a 1 cubic foot tank, and the three-pack holds 96. Use the table above for your size. [1]

You do the measuring. A kitchen measuring cup works, but keep one just for this. Pro Products' SDS says the cleaner may be corrosive to metals and to keep it only in its original packaging, so don't pour it into another container to store it.

The safety notes are the same as the 4 oz bottles, because it's the same liquid. The SDS lists phosphoric acid at 10 to 30%, a pH under 1, and the Danger signal word for skin burns and eye damage. Gloves and glasses go on before the cap comes off. [7]

Pro Products' SDS also says not to mix it with other chemicals and lists bases, metals and strong oxidizers as incompatible. Don't pour it into a brine well that you just dosed with something else.

Pro Products says it removes the iron, manganese, silt and metal buildup that cuts efficiency and flow rates. Pro Products lists the same NSF/ANSI/CAN 60 claim for the Res Care formula. [1]

My call: if your softener is bigger than 1 cubic foot, buy the gallon. Half-bottle doses from a 4 oz pack get messy, and you'd run through the pack in two cleanings. [1]

The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [1] [7]

How much each cleaner takes for a first cleaning

A first cleaning, or a fouled unit, takes a bigger dose than routine upkeep. Here's what each maker lists, in cups of product.

First-clean doses
CleanerProduct amountMixing water
Morton MWSC2 cups, whole 16 oz bottle [5]Ready to use
EcoPure EPCL2 cups, whole 16 fl oz bottle [14]Follow the bottle label
OUT Filter Mate2 cups [4]1 quart warm water [4]
Rust Out1-1/2 cups [2]1/2 gallon cold water [2]
Iron OUT1 cup [3]1/2 gallon cold water [3]
Res Care1/2 cup per cubic foot of resin [1]Ready to use
Amounts follow each product label. A 16 fluid ounce bottle holds 2 cups. Compare each cleaner with its own label, rather than treating a larger dose as stronger.

From Morton's MWSC page, EcoPure's EPCL page, Summit Brands' OUT Filter Mate and Iron OUT directions, and Pro Products' Rust Out and Res Care directions, checked November 15, 2026.

A bigger number doesn't mean a stronger clean. These are different chemicals. The powders get dissolved in water first and the liquids go in straight, so compare each cleaner with its own label, not with each other.

The water temperature matters on the powders. Rust Out and Iron OUT say cold water. OUT Filter Mate says warm. Follow the label you're holding.

Rust Out. Pro Products' cleaner for heavy iron

Best for iron well water

Rust Out RO05B

Pro Products Rust Out water softener cleaner and iron remover, 4.75 lb bottles, 4-pack (RO05B) [2]

RO05B, four 4.75 lb bottles
$86.52
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Made for high-iron well water
  • Layers into the salt for steady dosing
  • Also cleans rust stains on fixtures
  • pH 5.5 to 6.5 powder
  • 19 lb of powder in the pack

Cons

  • Eye irritant, wear glasses
  • Cabinet softeners: periodic cleaning only
  • Don't use it with bleach or peroxide
RO05BPowder4 lb 12 oz bottles1/2 cup per 40 lb saltIron water

Buy it if

Your softener runs on well water with iron, you see orange staining, or the resin is fouled and needs a restoring clean.

Skip it if

You're on city water with no iron problem. Res Care or OUT Filter Mate fits that better.

The tradeoff: Eye irritant, wear glasses

Rust Out is Pro Products' answer for iron. The maker says it's formulated for well water where iron levels run high, and its label goes further: all softeners on iron-bearing water require Rust Out as preventive care.

The listing explains how it works: it changes rust and iron into a clear solution that rinses away when the softener regenerates. Pro Products says it helps improve flow rates in high-iron conditions.

The first application is a dissolve-and-pour. Mix 1-1/2 cups in a half gallon of cold water, pour it into the brine well, and manually regenerate. Pro Products says to repeat it for a heavily fouled unit. [2]

Upkeep goes into the salt. The label says to add 1/2 cup per 40 lb of salt and layer it, so every regeneration pulls a little through. That's the main difference from a liquid you pour in each time. [2]

One exception: cabinet softeners, the all-in-one units with the salt and resin in one box. Pro Products says to use it for periodic cleaning only on those, with the first-application method.

What's in it, from the SDS: 30 to 60% sodium dithionite, plus sodium metabisulfite and sodium carbonate. It's a white powder with a mint smell and a pH of 5.5 to 6.5. The signal word is Warning, for serious eye irritation, so wear glasses. [8]

It isn't just for the softener. Pro Products lists toilets, laundry, dishwashers and exterior surfaces too. For laundry it says not to use it with bleach or peroxide.

Pro Products' own plan is two products: Rust Out to restore a fouled softener, then Res Care for ongoing upkeep. My call: on iron well water, follow that plan.

Each bottle in this pack is 4.75 lb, which matches the 4 lb 12 oz size on Pro Products' page. The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [2] [8]

How often to use each cleaner

After the first clean, the makers split two ways. Powders go in with the salt. Liquids get poured on a schedule.

CleanerRoutine doseHow oftenMethod
Res Care4 oz per cu ft of resin [1]Each regenerationPour in brine well, or Easy Feeder
Rust Out1/2 cup per 40 lb of salt [2]Every salt fillLayer in the salt
Iron OUT1/4 cup per 40 lb of salt [3]Every salt fillLayer in the salt
OUT Filter Mate1/2 cup per 40 lb of salt [4]Every salt fillLayer in the salt
Morton MWSCWhole 16 oz bottle [5]Every 4 months [5]Pour in brine well, regenerate
EcoPure EPCLWhole 16 fl oz bottle [14]Every 4 months [14]Pour in brine well, recharge

From Pro Products' Res Care and Rust Out directions, Summit Brands' Iron OUT and OUT Filter Mate directions, Morton's MWSC page and EcoPure's EPCL page, checked November 15, 2026.

Layering means what it sounds like. When you add a 40 lb bag, sprinkle the powder between layers of salt instead of dumping it on top, so each regeneration dissolves a little. The labels say this gives continuous treatment. [1]

Morton builds the reminder into its softeners. Its manual says the display flashes a clean reminder once four months pass on the timer, which lines up with one bottle three times a year.

Iron OUT. the rust remover with softener directions

Best for iron plus rust stains

Iron OUT powder 2-pack

Iron OUT rust stain remover powder, 1 lb 12 oz bottles, 2-count (IO30N) [3]

IO30N, two 1 lb 12 oz bottles
$20.00
Check it on Amazon
low stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Softener directions on the label
  • 1/4 cup per 40 lb of salt
  • Septic safe, per Summit Brands
  • Also cleans rust in toilets
  • Small bottles

Cons

  • SDS signal word Danger, for eye damage
  • Not for worn porcelain cast iron
  • Can damage colored fabric
IO30NPowder1 lb 12 oz bottles1/4 cup per 40 lb saltIron water

Buy it if

You have iron water, a softener to keep clean, and rust stains on fixtures, and you want one powder for both.

Skip it if

Your water has no iron. On city water, a citric cleaner like OUT Filter Mate or Res Care matches the job.

The tradeoff: SDS signal word Danger, for eye damage

Iron OUT is best known as a rust stain remover, but Summit Brands prints full softener directions on it. Its label says all softeners on iron-bearing water require Iron OUT as preventive care to clear iron buildup.

The first application uses 1 cup dissolved in a half gallon of cold water. Pour it into the brine well, or into the salt tank when the salt is low if there's no brine well, and manually regenerate. Summit says to repeat it for a heavily fouled unit. [3]

Routine use is 1/4 cup per 40 lb of salt, layered for continuous treatment. That's half the per-bag amount Rust Out lists. Cabinet models get the first-application method only, for periodic cleaning. [3]

The chemistry is close to Rust Out's. Summit's SDS lists sodium hydrosulfite at 15 to 40%, which has the same CAS number, 7775-14-6, as the sodium dithionite in Rust Out. It also lists sodium carbonate and sodium metabisulfite, with a pH of 5.5 to 6.5. [12]

Take the safety line seriously. The Iron OUT SDS uses the signal word Danger, for serious eye damage, and says to wear eye protection. It adds that permanent eye damage, including blindness, could result.

The label covers other jobs too, like rust rings in a toilet bowl, where Summit lists 1/2 cup. It warns it's not for older, worn or chipped porcelain cast iron fixtures, and that it may damage colored fabric. [3]

For laundry, Summit says not to use it with peroxide or bleach. My call: carry that rule to the softener, and use one product at a time.

If the tap water tastes or smells off after a cleaning, the label says to regenerate again, then run cold water until it's gone.

My call: if you're already buying Iron OUT for orange toilet rings, this covers the softener too. If the softener is the only job, Rust Out comes in bigger bottles. The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [3] [12]

Which cleaners extend a softener warranty

Two softener makers tie a longer warranty to their own cleaner. If you own one of these softeners, the brand of cleaner matters.

SoftenerStandard warrantyWith its cleanerThe fine print
Morton1 year on most parts, 10 years on the tanks [9]Up to 5 years on parts [9]One MWSC bottle every 4 months; keep receipts; other additives don't count [9]
EcoPure1 year [14]Up to 5 years [14]Use EPCL as recommended; details vary by model
Other brandsCheck your manualNot listedNeither cleaner maker lists an extension for other brands

From Morton's warranty page and Morton softener manual 7393349 (Rev. F, 1/31/25), and EcoPure's EPCL page, checked November 15, 2026.

Morton's terms are strict. Its manual says to use one bottle every four months from the purchase date, keep proof of purchase, and that no more than three bottles in a 12 month period count. It also says any additive other than MWSC won't give the extended coverage. [5]

My call: if your softener is a Morton or EcoPure and still inside that window, use its cleaner and file the receipts. The coverage is worth more than any difference between cleaners.

OUT Filter Mate. a citric acid cleaner you mix into the salt

Best for city water

OUT Filter Mate

Water softener cleaner and salt booster, 24 oz bottles, 4-pack [4]

24 oz bottles, 4-pack
$42.96
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Listed for city water
  • Mixes into the salt
  • Septic safe, per Summit Brands
  • Also descales dishwashers
  • Odorless crystals

Cons

  • Light iron only, under 1 ppm
  • Eye and breathing irritant
  • Not for heavy iron
OUT Filter MateCrystals24 oz bottles1/2 cup per 40 lb saltCity water

Buy it if

You're on city water, or well water with little iron, and you'd rather add a cleaner with the salt than pour one in by hand.

Skip it if

Your water carries a lot of iron. Rust Out or Iron OUT is made for that.

The tradeoff: Light iron only, under 1 ppm [4]

OUT Filter Mate is Summit Brands' everyday softener cleaner. The listing calls it a cleaner for city water. It says it removes light iron, under 1 ppm, plus low levels of calcium, lime, manganese, tannins, dirt and silt. [4]

It is a different chemistry from the iron powders. Summit's safety sheet lists citric acid at 80 to 100%, as odorless white crystals. I match that salt-booster use to routine maintenance rather than heavy iron removal. [13]

Summit calls it a salt booster too. The directions match how it's used: for upkeep, add 1/2 cup to every 40 lb of salt and layer it, so each regeneration gets a steady dose. [4]

The first application is bigger. Dissolve 2 cups in 1 quart of warm water, pour it into the brine well, and manually regenerate. With no brine well, pour it into the salt tank when the salt is low. Summit says to repeat as needed. [4]

The safety sheet lists a Warning: it can cause serious eye irritation and breathing irritation, and it may form combustible dust in the air. Avoid breathing the dust and wear glasses. It may also be corrosive to metals, so keep it in its original bottle.

Summit says it's safe for all water softeners and for septic systems. The label also lists a dishwasher use, 1/2 cup in an empty machine run on a normal cycle, and a general cleaning mix of 1/2 cup per gallon of warm water. [4]

There's a pro use on the label too: feeding it through a chemical feed pump to adjust pH, with the right rate reached when treated water reads 7.0 to 8.0. Most homes won't need that, but it shows what the product is. [13]

My call: on city water, adding it with the salt is a simple routine. It goes in with the salt, so there's no schedule to forget.

The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [4] [13]

How to clean a water softener with a cleaner

Every label here follows the same pattern. These steps come from those directions. Your own label wins where it differs.

  1. 1
    Gear up

    Put on eye protection. Res Care's SDS adds gloves, since it can burn skin.

  2. 2
    Find the brine well

    EcoPure describes it as the black tube with a gray or white cap inside the salt tank.

  3. 3
    Measure the dose

    Use your label's first-clean amount. For Res Care, that's 4 oz per cubic foot of resin. [1]

  4. 4
    Dissolve powders first

    Rust Out and Iron OUT go in a half gallon of cold water. OUT Filter Mate goes in a quart of warm water.

  5. 5
    Pour it in

    Pour into the brine well. No brine well? Pour into the salt tank when the salt is low.

  6. 6
    Regenerate right away

    Start a manual regeneration. On a Morton, press and hold the recharge button.

  7. 7
    Flush the line

    EcoPure says to run the nearest cold faucet past the softener for 10 to 15 minutes after the recharge. [14]

From Pro Products' Res Care, Rust Out and Easy Feeder directions and SDS, Summit Brands' Iron OUT and OUT Filter Mate directions, Morton's MWSC page and EcoPure's EPCL FAQ, checked November 15, 2026.

EcoPure says its recharge runs two and a half to three hours, so start a cleaning when nobody needs water for a while. Evening works well.

If the water tastes or smells off afterward, Pro Products and Summit give the same fix: regenerate again, then run cold water until it's gone.

Morton MWSC. the bottle that keeps a Morton warranty alive

Best for a Morton softener warranty

Morton MWSC universal water softener cleanser, 16 oz

MWSC, 16 oz bottle
$22.50
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Extends Morton parts warranty to 5 years
  • Whole bottle, no measuring
  • Ready to use, no mixing
  • Listed for most major brands
  • Every 4 months

Cons

  • Single bottle per pack
  • Ingredients not listed on Morton's page
  • Up to 3 bottles a year count for warranty
MWSCLiquid16 oz bottle1 bottle / 4 monthsWarranty

Buy it if

You own a Morton softener and want the parts warranty stretched from 1 year to 5. [10]

Skip it if

Your softener is out of warranty or isn't a Morton, and your water has iron. Rust Out is built for that.

The tradeoff: Single bottle per pack

For a Morton softener owner, the choice is made for you. Morton's manual says the 1-year warranty on parts, other than the salt and resin tanks, can be extended to five years if you use Morton MWSC. [10]

The rules are specific. Use one bottle, as directed, every four months from the purchase date. Keep proof of purchase to back a claim after the first year. And no more than three bottles in a 12 month period count toward it. [10]

The manual adds one more line: using any water softener additive other than MWSC won't give the extended coverage. So a Morton owner who switches to another cleaner gives that up.

Using it is simple. Morton's directions say to pour the whole 16 oz bottle into the brine well. With no brine well, pour it into the salt tank when the salt is low. Then start a manual regeneration right away by pressing and holding the recharge button. [5]

There's no mixing. Morton calls it ready to use, and says full directions are on the back of the bottle.

Morton's softeners help you keep the schedule. Its manual says the display flashes a clean reminder after four months on the timer, a prompt to use MWSC three times a year.

It isn't Morton-only. Morton calls it ideal for all major softener brands, and the listing names Whirlpool, EcoPure, Omni, Culligan, GE and Kenmore.

What I couldn't find is a safety data sheet on Morton's softener site, so the ingredients are Not listed here. Wear eye protection anyway, like with every cleaner on this page.

My call: if you own a Morton, buy this and nothing else while the warranty runs. File the receipts with the softener manual. The current new offer is sold by TradePros on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [5] [9] [10]

What's in each cleaner, from the safety sheets

The safety data sheet tells you the active chemical and how careful to be. Here's what the makers publish.

CleanerMain ingredientForm and pHSignal word
Res CarePhosphoric acid, 10 to 30% [7]Blue liquid, pH under 1 [7]Danger: skin burns, eye damage
Rust OutSodium dithionite, 30 to 60% [8]White powder, pH 5.5 to 6.5 [8]Warning: eye irritation
Iron OUTSodium hydrosulfite, 15 to 40% [12]White powder, pH 5.5 to 6.5 [12]Danger: eye damage
OUT Filter MateCitric acid, 80 to 100% [13]White crystalsWarning: eye and breathing irritation
Morton MWSCNot listedNot listedNo SDS found on Morton's site
EcoPure EPCLNot listedNot listedNo SDS found on EcoPure's site

From Pro Products' SDS for Res Care (11/17/2025) and Rust Out (11/18/2025), and Summit Brands' SDS for Iron OUT powder (1/31/2024) and OUT Filter Mate (10/28/2025), checked November 15, 2026.

Pro Products' safety sheets for Res Care and Rust Out both say not to mix them with other chemicals. Summit says not to use Iron OUT with bleach or peroxide on laundry. My call: one cleaner per cleaning, and let the regeneration rinse it out before you add anything else.

I wear eye protection when handling these cleaners. Res Care also asks for gloves and face protection, because a pH under 1 burns skin. [7]

EcoPure EPCL. the cleaner tied to EcoPure's warranty

Best for an EcoPure softener warranty

EcoPure EPCL

Universal water softener cleaner, 16 fl oz [6]

EPCL, 16 fl oz bottle
$24.33
Check it on Amazon
in stock · price as of Nov 22, 2026, 9:30 AM EST

Pros

  • Can extend EcoPure warranty to 5 years
  • Whole bottle, no measuring
  • Clear flushing steps from EcoPure
  • Listed for all softener brands
  • Every 4 months

Cons

  • Single bottle per pack
  • Ingredients not listed on EcoPure's page
  • Warranty terms vary by model
EPCLLiquid16 fl oz bottle1 bottle / 4 monthsWarranty

Buy it if

You own an EcoPure softener and want to keep its extended warranty, or you like a full bottle every four months.

Skip it if

Your well water carries heavy iron. Rust Out and Iron OUT are made for that.

The tradeoff: Single bottle per pack

EPCL is EcoPure's own cleaner, and the reason to buy it is the warranty. EcoPure says you can extend the 1-year warranty on its softeners to five years by buying and using EPCL as recommended. [6]

EcoPure's page adds an extra year on newly bought EcoPure softeners with recommended use, extending to five years with continued use. It also says to see each model's details, so check your manual for the exact terms.

The schedule is every four months, the same as Morton's. EcoPure says that keeps the softener at peak efficiency and guards against wear. At that pace, three bottles cover a year.

Its FAQ gives the clearest how-to of any cleaner here. Pour the whole bottle down the brine well tube, the black cylinder with a gray or white cap inside the salt tank. Then start a recharge right away.

Then flush. EcoPure says the recharge runs two and a half to three hours, so start it when nobody needs water for a while. After that, run the closest cold water faucet downstream of the softener for 10 to 15 minutes to flush out leftover cleaner. [14]

EcoPure's product details list the size as 16 fl oz, and say it works with all grain capacities. [6]

The listing says it works in any brand of softener and names EcoPure, Whirlpool, Omni, Culligan, GE, Kenmore, Morton, Rheem and North Star.

Like Morton, EcoPure doesn't post a safety data sheet on its page, so the ingredients are Not listed here. Wear eye protection when you pour.

My call: for an EcoPure owner, buy this and keep the receipts, like with Morton's. The current new offer is sold by Amazon.com on Amazon. I checked the listing on November 15, 2026. [15]

Directions and safety sources: [6] [14]

Pouring by hand vs an automatic feeder

Pro Products sells a wick feeder that drips Res Care into the brine well on its own. Here's how the two ways compare.

Pour by handRes Care Easy Feeder
How it dosesYou pour before a regenerationA wick feeds the brine well
Power neededNoneNone
Dose controlYou measure1/2 oz (yellow) or 1 oz (clear) wick [11]
InstallNoneDrill 2 holes in the tank, 1 in the brine well cap [11]
BottleAny Res Care size64 oz, refillable [1]
Forgetting a doseEasy to doCan't happen while it's full

From Pro Products' Res Care Easy Feeder starter kit page and installation instructions, checked November 15, 2026.

Pro Products says to pick the wick by how often the softener regenerates. The install calls for two 1/4 in. holes 2 in. from the top of the brine tank, 1-3/8 in. apart and about 6 in. from the brine draw tube hole, plus a 1/2 in. hole in the brine well cap. [11]

I didn't make the feeder a pick. The Amazon listing's model number didn't match the maker's kit, and its text named a different cleaner, so I couldn't confirm what's in the box. The Res Care gallon refills a feeder you already own.

The seven picks side by side

PickBest forFormRoutine useMaker-listed NSF 60
Res Care 4 ozMost softenersLiquid4 oz per cu ft each regen [1]Yes
Res Care 1 gallonBig tanks, frequent dosesLiquid4 oz per cu ft each regen [1]Yes
Rust OutIron well waterPowder1/2 cup per 40 lb salt [2]Not listed
Iron OUTIron plus rust stainsPowder1/4 cup per 40 lb salt [3]Not listed
OUT Filter MateCity waterCrystals1/2 cup per 40 lb salt [4]Not listed
Morton MWSCMorton warrantyLiquid1 bottle every 4 months [5]Not listed
EcoPure EPCLEcoPure warrantyLiquid1 bottle every 4 months [14]Not listed

From each maker's directions and product pages, checked November 15, 2026. Maker-listed NSF 60 shows only where the maker lists it. All seven have a new, in-stock Amazon offer. Morton MWSC is sold by TradePros; the other selected offers are sold by Amazon.com.

How to choose a water softener cleaner

If you…GetWhy
Have a standard softener on city waterRes Care 4 oz [1]One bottle per 1 cu ft dose [1]
Have a tank bigger than 1.5 cu ftRes Care 1 gallon [1]32 doses per gallon at 1 cu ft [1]
Have iron in your well waterRust OutMade for high-iron water
Want one powder for the softener and rust stainsIron OUTSoftener and fixture directions
Want the cleaner to go in with the saltOUT Filter Mate1/2 cup per 40 lb bag [4]
Own a Morton softener under warrantyMorton MWSCOnly cleaner that counts
Own an EcoPure softenerEcoPure EPCLUp to 5 year warranty [14]

Start with the softener's brand and age. If it's a Morton or EcoPure still inside the extended window, buy the matching cleaner and stop there.

Then look at your water. Morton's FAQ says well owners need to test for hardness and iron. My hardness test kit guide covers that. If iron runs high, an iron filter ahead of the softener may matter more than any cleaner.

Questions people ask

Does water softener cleaner actually work?

The makers say cleaners remove iron, manganese, silt and metals that salt leaves behind in the resin. None of them publish before-and-after capacity numbers that I could find. Pro Products also says its cleaner won't fix mechanical faults, failed parts or an undersized softener.

Do I really need to clean my water softener?

Morton and EcoPure both call for their cleaner every four months. Pro Products and Summit Brands say softeners on iron-bearing water need an iron cleaner as preventive care. My call: on iron well water, yes. On city water, follow your softener maker's schedule.

Can you run vinegar through your water softener?

None of the softener or cleaner directions I read list vinegar. They name their own products and doses. Stick with a cleaner your softener's maker or the label lists, and check your manual before trying anything else.

Can I pour bleach in my water softener brine tank?

Morton's manual lists bleach for sanitizing, not cleaning: about 3 oz (6 tablespoons) of household bleach in the brine well at install, then a recharge, then 50 gallons run through a cold faucet. Don't combine it with a cleaner. Pro Products' safety sheets say not to mix their cleaners with other chemicals. [1]

How often should I clean my water softener?

It depends on the product. Morton MWSC and EcoPure EPCL go in every four months. Res Care lists 4 oz per cubic foot at each regeneration. Rust Out, Iron OUT and OUT Filter Mate get layered into the salt at each fill. [1]

How much Res Care do I use?

Pro Products says 4 oz, or 1/2 cup, per cubic foot of resin, and that most home softeners hold about 1 cubic foot. A 2 cubic foot tank takes 8 oz. [1]

Can I use Iron OUT in a water softener?

Yes. Summit Brands prints softener directions on Iron OUT powder: 1 cup in a half gallon of cold water for the first clean, then 1/4 cup per 40 lb of salt. Cabinet models get the first-clean method only. [1]

Will another cleaner void my Morton warranty extension?

Morton's manual says any additive other than Morton MWSC won't give the extended warranty coverage. The standard warranty is a separate question, so check your manual.

Where do I pour cleaner if there's no brine well?

Every label here gives the same answer: pour it into the salt tank when the salt level is low, then start a manual regeneration.

Why does my water taste funny after cleaning the softener?

Pro Products and Summit say to regenerate the softener again, then run cold water until the taste or smell is gone. EcoPure says to run the nearest cold faucet past the softener for 10 to 15 minutes after the recharge. [14]

How I picked these

Why trust me

I match the cleaner to the water problem, then check the maker's directions, safety sheets and warranty conditions. A cleaner is a maintenance product; it does not repair a failed valve, blocked injector or undersized system.

How I pick

  • One pick per job, so each cleaner does something the others don't.
  • Facts from the maker's directions, product pages, manuals and safety data sheets. Anything not stated is marked "Not listed".
  • Genuine branded products, new and in stock. Prices read from Amazon with the time shown, never typed in.
  • No scores, because a warranty bottle and an iron powder can't share one.

Sources

Related guides