Buy the Badger 5 for most kitchens: 1/2 HP, 11-1/2 in. tall, 5-year in-home warranty. InSinkErator's manual groups the store-only 500 and 5XL with it. Get the 5XP for 3/4 HP and stainless grind parts; the Badger 1 suits light use.
Best for most kitchens: InSinkErator Badger 5, 1/2 HP$114.48 at AmazonPrice as of Nov 22, 2026, 9:30 AM EST
The Badger 5XP link goes to the version with a factory power cord. The Badger 5 and Badger 1 links are no-cord units bundled with InSinkErator's CRD-00 cord kit, which you wire on. Amazon is on InSinkErator's authorized reseller list. Before you buy, check that the seller is still Amazon.com and the condition is New.
Best for most kitchens: 1/2 HP, 5-year in-home warranty
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
All nine Badger names, decoded
InSinkErator sells three Badgers under their own names: the 1, the 5 and the 5XP. Stores sell six more names. One InSinkErator manual, number 138440, covers all nine and sorts them into three families by height and warranty.
From InSinkErator's Badger Series installation, care and use manual 138440 (dimension table and warranty heading), the Badger 1, 5 and 5XP spec sheets, and a Google Shopping check on Oct 20, 2026.
Read the chart by family. The manual's dimension table gives the Badger 1, 1XL, 100, 5, 5XL and 500 an overall height of 11-1/2 in. It gives the 5XP, 7XL and 700 an overall height of 12-5/8 in.
The warranty heading in the same manual uses the same three groups: 2 years for the 1, 1XL and 100; 5 years for the 5, 5XL and 500; and 6 years for the 5XP, 7XL and 700.
The manual gives no motor or grind-part spec for the six store names, and we found no separate spec sheet for them. InSinkErator's own site sells only the 1, 5 and 5XP, and its comparison chart lists only those three. So horsepower and grind parts are confirmed for the base names alone.
The Badgers up close
Best for most kitchens: 1/2 HP, 5-year in-home warranty
Prices and availability are accurate as of the time shown and may change.
Pros
1/2 HP Dura-Drive induction motor at 6.3 A
5-year in-home warranty, parts and labor
11-1/2 in. tall, the shortest Badger height
Lift & Latch mount; Quick Lock swaps with any Badger
Sold by Amazon.com, an authorized reseller
Cons
Galvanized steel grind parts, not stainless
Single grind stage; no fibrous foods
Standard sound
You wire on the CRD-00 cord kit yourself
1/2 HP, 120 V6.3 A average load11-1/2 in. tall26 oz chamber13 lb 10 oz shipping, no cord5-yr in-home warranty
Buy it if
You're replacing a worn-out Badger or another standard disposal in a family kitchen, you want the longest warranty you can get at 11-1/2 in. tall, and you scrape plates into the trash before grinding the rest.
Skip it if
You run the disposal several times a day. The Badger 5XP adds 1/4 HP, stainless grind parts and a sixth year of warranty.
The Badger 5 is the middle of InSinkErator's Badger Series. Its spec sheet lists a 1/2 HP Dura-Drive induction motor drawing 6.3 A at average load on a 120 V circuit.
Inside, it grinds in one stage. Two stainless steel lugs on 360° swivels throw food against a stationary grind ring, so there are no blades. The grind ring and plate are galvanized steel. The chamber holds 26 oz, the same as every Badger.
It stands 11-1/2 in. from the sink flange down, per both the spec sheet table and the manual. That's 1-1/8 in. shorter than the 5XP, which matters in a shallow cabinet. The drain outlet doesn't move: both spec sheets put its center 6 in. below the sink, plus 1/2 in. for a stainless sink.
The factory-corded Badger 5 and the plain no-cord unit were both out of stock on Oct 21. Amazon.com sold the no-cord unit new that day, bundled with InSinkErator's CRD-00 kit: a 3-foot cord, a strain relief clamp and wire connectors that you attach before you hang it. InSinkErator lists 13 lb 10 oz shipping weight without the cord.
The warranty is the reason it beats the Badger 1 for most homes. InSinkErator covers it for 5 years in your home, parts and labor, through an authorized service center. The clock starts on the latest of the install date, the purchase date (or delivery, if later) or the manufacture date, so keep your receipt.
Install uses Lift & Latch: the lower mounting ring is fixed to the body with a tab, so you lift the unit with both hands and turn it right onto three ramps. Quick Lock lets it twist onto an existing InSinkErator mount, and InSinkErator says any Badger swaps with any Badger or Evolution.
Pick it for an everyday family kitchen. It's the Badger that InSinkErator's own manual groups with the 500 and 5XL, so if a store only stocks one of those names, the published height and warranty are the same.
Best for heavy daily use: 3/4 HP, stainless grind parts
Prices and availability are accurate as of the time shown and may change.
Pros
3/4 HP, the most power in the Badger line
Stainless steel grind components
6-year in-home warranty
Same 26 oz chamber and Quick Lock mount
Corded and no-cord versions both sold by Amazon.com
Cons
12-5/8 in. tall, 1-1/8 in. taller than the Badger 5
9.5 A load; check the circuit
Still one grind stage, standard sound
Amazon listing bullets disagree with the maker on warranty
3/4 HP, 120 V9.5 A average load12-5/8 in. tall26 oz chamber15 lb 6 oz shipping, with cord6-yr in-home warranty
Buy it if
Your disposal runs after every meal, you cook from scratch most days, and you have at least 12-5/8 in. of clear space from the sink bottom to anything below.
Skip it if
You have less than 12-5/8 in. below the sink. The Badger 5 needs 11-1/2 in. and still carries a 5-year warranty.
The 5XP is the top of the Badger Series. InSinkErator's spec sheet lists a 3/4 HP Dura-Drive induction motor drawing 9.5 A at average load, against 6.3 A for the Badger 5. That extra current is worth knowing if the disposal shares a circuit with a dishwasher.
The real upgrade is inside. The 5XP's grind components are rust-resistant stainless steel, where the Badger 1 and 5 use galvanized steel. It still grinds in one stage with two stainless swivel lugs and a 26 oz chamber.
One Amazon listing gets this wrong. The bullets on the no-cord 5XP listing call its components galvanized steel. InSinkErator's spec sheet and comparison chart both say stainless for the 5XP, so go by the maker. Stainless resists the rust that pits galvanized parts over years of wet use.
It's taller. The manual and spec table give 12-5/8 in., and the corded Amazon listing says 12.63 in. The spec sheet's dimension drawing is labeled 11-1/2 in., but the Badger 5's drawing carries 12-5/8, so the two drawings look swapped. Measure for 12-5/8.
InSinkErator's warranty for the 5XP is 6 years in-home, parts and labor. The corded Amazon listing's bullets say 4 years. The maker's warranty document is the one that governs, and it says 6.
Both versions were new, in stock and sold by Amazon.com on Oct 20. InSinkErator lists approximate shipping weights of 15 lb 6 oz with the cord and 15 lb 2 oz without. The no-cord unit is for a disposal wired straight into a junction box. InSinkErator recommends its CRD-00 cord if you add one later.
On the maker's chart, the 5XP matches the Power .75HP on horsepower and warranty. The Power adds a second grind stage and reduced sound. Pick the 5XP if you want the most power and the toughest grind parts in the Badger line.
Best for light use, like a bar or second sink: 1/3 HP
Prices and availability are accurate as of the time shown and may change.
Pros
1/3 HP at 5.6 A, the lightest electrical load
11-1/2 in. tall, same as the Badger 5
Same mount, chamber and swivel lugs
Lowest shipping weight: 12 lb 10 oz, no cord
No-cord unit and cord-kit bundle sold by Amazon.com
Cons
2-year in-home warranty
Galvanized steel grind parts
Least power in the Badger line
You wire on the CRD-00 cord kit yourself
1/3 HP, 120 V5.6 A average load11-1/2 in. tall26 oz chamber12 lb 10 oz shipping, no cord2-yr in-home warranty
Buy it if
The sink sees light use: a bar sink, a vacation home, a rental unit with few cooks, or a second kitchen where most scraps go to the trash.
Skip it if
It's the main sink in a busy kitchen. The Badger 5 is the same height with more power and 3 more years of warranty.
The Badger 1 is the entry model in the Badger Series. Its spec sheet lists a 1/3 HP Dura-Drive induction motor at 5.6 A average load. It shares the Badger 5's 11-1/2 in. height, 26 oz chamber, galvanized grind parts and two stainless swivel lugs.
So the Badger 1 and Badger 5 look alike under the sink. What separates them is motor size, 1/3 HP against 1/2 HP, and warranty, 2 years against 5. The Badger 5's approximate shipping weight is also a pound more, 13 lb 14 oz with cord against 12 lb 14 oz.
The warranty gap is the main reason we don't pick the Badger 1 for a family kitchen. Three extra years of in-home parts and labor on the Badger 5 is the bigger difference over the life of the unit.
Amazon's listing for the factory-corded Badger 1 W/C says 1-year limited service warranty in its bullets. InSinkErator's spec sheet, warranty document and manual all say 2 years in-home. The maker's warranty governs, so keep the receipt and the install date.
Where it makes sense is light duty. A bar sink, a cabin or a basement kitchen rarely asks for more than 1/3 HP, and the lower 5.6 A load is easiest on a shared circuit.
The factory-corded W/C was out of stock on Oct 21. Amazon.com sold the no-cord unit new that day, alone or bundled with InSinkErator's CRD-00 kit: a 3-foot cord, a strain relief clamp and wire connectors that you attach.
InSinkErator lists an approximate shipping weight of 12 lb 10 oz without the cord. Like every Badger, it needs a wall switch with a marked Off position rated at least 1 HP.
InSinkErator's replacement guide lists the Badger 1 as the current match for the discontinued Badger 1XT and models 6010 and 6012, as its suggested replacement for those units. The no-cord version suits a 6010 that was hard wired, if the existing supply meets the manual's switch and grounding rules.
All three Badgers side by side
Scroll sideways on a phone.
Badger
Photo
Motor
Height
Warranty
Short pros / cons
Buy
Badger 5 Most kitchens
1/2 HP, 6.3 A
11-1/2 in.
5 years
Longest warranty at 11-1/2 in. / Galvanized grind parts
In height and warranty, yes. InSinkErator's documents don't confirm the motor or grind parts of the 500 or 5XL.
Check
Badger 5
Badger 500 and 5XL
Source
Covered by manual 138440
Yes
Yes
Manual cover list
Overall height
11-1/2 in.
11-1/2 in.
Manual dimension table
In-home warranty
5 years
5 years
Manual warranty heading
Motor published
1/2 HP, 6.3 A
No spec sheet found
Badger 5 spec sheet
Grind parts published
Galvanized steel, stainless lugs
No spec sheet found
Badger 5 spec sheet
Sold by InSinkErator's own site
Yes
No
insinkerator.com shop
On what InSinkErator's manual confirms, the 500 and 5XL match the Badger 5: same manual group, same height, same 5-year in-home warranty. Motor and grind parts aren't confirmed for them.
The Amazon listing for a Badger 500 that we found on Oct 20 also called it 1/2 HP. That listing came from a third-party seller with one line of detail.
A Reddit r/Plumbing thread that ranks for this question reports one visible difference: the lower mounting ring. InSinkErator's FAQ says newer Lift & Latch disposers have a stationary lower ring with a small notch, where past models had a ring that spins.
Our read, not InSinkErator's statement: a ring that looks different probably reflects which production run a unit came from, not a different motor. We found no part-by-part list for the store names. If the ring matters to you, check that the box says Lift & Latch.
Badger 1 vs Badger 5
The Badger 1 and 5 share a height, mount, chamber and grind parts. Motor and warranty set them apart.
Check
Badger 1
Badger 5
Difference
Motor
1/3 HP
1/2 HP
+1/6 HP
Average load
5.6 A
6.3 A
+0.7 A
In-home warranty
2 years
5 years
+3 years
Overall height
11-1/2 in.
11-1/2 in.
Same
Shipping weight with cord (approx.)
12 lb 14 oz
13 lb 14 oz
+1 lb
Grind parts
Galvanized steel
Galvanized steel
Same
Chamber
26 oz
26 oz
Same
Mount
Lift & Latch, Quick Lock
Lift & Latch, Quick Lock
Same
Two things change: the motor and the warranty. Everything you'd measure under the sink, from the height to the drain connection, is the same, so either one fits where the other came out.
For a main kitchen sink, the Badger 5 is the better buy on the published facts. It adds 1/6 HP and three more years of in-home coverage, 5 years against 2. The Badger 1 earns its place where the disposal sees little use.
Badger 5 vs Badger 5XP
Here the bodies differ, so fit comes into it.
Check
Badger 5
Badger 5XP
Difference
Motor
1/2 HP
3/4 HP
+1/4 HP
Average load
6.3 A
9.5 A
+3.2 A
Grind parts
Galvanized steel
Stainless steel
Rust resistant
In-home warranty
5 years
6 years
+1 year
Overall height
11-1/2 in.
12-5/8 in.
+1-1/8 in.
Shipping weight with cord (approx.)
13 lb 14 oz
15 lb 6 oz
+1 lb 8 oz
Grind stages
1
1
Same
The 5XP is the better grinder on paper: more motor and stainless grind parts that resist rust. It also adds a year of warranty. The price of entry is 1-1/8 in. of height and 3.2 A more load on the circuit.
The drain doesn't move between them. Both spec sheets put the outlet's center 6 in. below the bottom of the sink, plus 1/2 in. for a stainless sink, so the trap connection lines up the same.
What changes is the bottom of the body: measure 12-5/8 in. down from the sink and check that nothing in the cabinet sits in the way.
InSinkErator's spec sheets also say to plumb the waste line so water can't stand in the disposer. If the outlet already sits below the trap arm in the wall, fix that slope whichever Badger you buy.
What the Badger warranty actually covers
InSinkErator calls it a We Come to You in-home limited warranty. The terms are the same across the Badger line except for the length.
Badger
InSinkErator warranty
Amazon listing bullets, Oct 20
Which governs
Badger 1 with cord
2 years in-home
1-year limited service
InSinkErator: 2 years
Badger 5 with cord
5 years in-home
No warranty bullet
InSinkErator: 5 years
Badger 5XP with cord
6 years in-home
4-year limited service
InSinkErator: 6 years
The warranty runs from the latest of three dates: the install date, the purchase or delivery date, or the manufacture date in the serial number. Without a receipt for the first two, InSinkErator sets the start date from the serial number. Keep both receipts.
It covers defects in materials and workmanship for residential use, including replacement parts and labor, with service at your home. Only an authorized InSinkErator service representative may do warranty work. For service, InSinkErator's AnswerLine is 1-800-558-5700.
Three exclusions catch people. The warranty is void if you try to repair the unit yourself. It doesn't apply to commercial installs. And if InSinkErator replaces the unit, the replacement gets only the time left on the original term, not a fresh one.
Amazon appears on InSinkErator's authorized reseller list, and the three linked units are sold by Amazon.com itself. Wear and tear, cosmetic rust and damage from installing against InSinkErator's instructions or local codes aren't covered.
Will a Badger fit under your sink?
Every Badger shares the same mount, chamber and drain outlet height. Overall height is the one number that changes.
Measure
Badger 1 and 5
Badger 5XP
Source
Overall height
11-1/2 in.
12-5/8 in.
Manual 138440, spec tables
Sink bottom to outlet center
6 in. (6-1/2 in. stainless sink)
6 in. (6-1/2 in. stainless sink)
Spec sheet drawings
Width
6-5/16 in.
6-5/16 in.
Manual 138440
Sink hole
Standard 90 mm
Standard 90 mm
InSinkErator FAQ
Drain connection
1-1/2 in. cushioned slip joint
1-1/2 in. cushioned slip joint
Spec sheets
Dishwasher inlet
Yes, knockout plug
Yes, knockout plug
Spec sheets, manual
Mount
Quick Lock, Lift & Latch
Quick Lock, Lift & Latch
InSinkErator
InSinkErator's FAQ says most sinks come with a 90 mm drain hole and its disposals are built for it, so you don't need a special sink. A ceramic sink is the exception: InSinkErator recommends an Evolution model there, for its anti-vibration mount.
Quick Lock is why Badger swaps are quick. InSinkErator says any Badger can replace any Badger or Evolution on the same mount. The manual adds that if the new disposer's mount matches the old one, you can skip the sink flange steps and go straight to the dishwasher plug and wiring.
InSinkErator publishes a food list for each series. The Badger list is the shortest, because Badgers grind in one stage.
Food
Badger Series
Power Series
Advanced Series
Coffee grounds, rice, pasta, bread
Yes
Yes
Yes
Citrus rinds, apple cores, potato peels
Yes
Yes
Yes
Egg shells
Yes, not in large amounts
Yes
Yes
Peach and avocado pits
Not on its list
Yes
Yes
Cooked boneless meat, raw meat, salmon
Not on its list
Yes
Yes
Banana peels, celery
No, too fibrous
Not on its list
Yes
Chicken bones, cooked beef bones, corn cobs
Not on its list
Not on its list
Yes
Fats, oils, grease
Never
Never
Never
InSinkErator's FAQ is plainer still: its Standard Series, which includes the Badgers, can grind any food apart from stringy and fibrous materials such as banana peel, celery and rhubarb. The Badger manual adds corn husks and artichokes, and warns against large amounts of egg shells.
The manual and the website don't fully agree. The manual's care section says to grind hard materials such as small bones, fruit pits and ice, because they scour the chamber.
The website's food list saves pits and bones for the Power and Advanced Series. We'd follow the shorter website list for a Badger. It's the same list for the 1, 5 and 5XP, so the 5XP's extra horsepower doesn't add foods to it.
Never put in clam or oyster shells, glass, metal, caustic drain cleaners, hot grease or other hot liquids, per the manual. Run cold water before, during and for several seconds after grinding.
Where the Badger sits in InSinkErator's lineup
InSinkErator's comparison chart puts the three Badgers at the bottom of a ladder. Each step up adds warranty years, grind stages or quieter running.
From InSinkErator's garbage disposal comparison chart, read Oct 20, 2026. Evolution .75HP and 1.0HP shown; LED, Septic Guard and Cover Control versions are left out.
The closest step above the 5XP is the Power .75HP. On the chart both are 3/4 HP with a 6-year warranty. The Power adds a second grind stage, which InSinkErator says grinds finer to help prevent clogs, plus reduced sound and stainless grind parts like the 5XP.
The Evolution line adds InSinkErator's SoundSeal insulation, three or four grind stages and 9- or 10-year warranties. It's the line InSinkErator recommends for ceramic sinks. Our best garbage disposal guide compares Badgers against Evolution and other brands.
Wiring, switch and cord rules
Every Badger is a 120 V, 60 Hz, continuous-feed unit run from a wall switch. The manual sets these rules.
Rule
What the Badger manual says
Switch
Marked Off position, wired to break every ungrounded conductor, within sight of the sink opening
Switch rating
1 HP minimum, for every Badger, including the 1/3 HP Badger 1
Grounding
Must be grounded; ground wire to the green grounding screw; never to a gas line
Cord
If it has no factory cord, use a cord with a grounding conductor and plug; InSinkErator recommends its CRD-00
Outlet
Three-prong plug into a grounded three-hole receptacle; never modify or force the plug
Hard wiring
White to neutral, black to hot, with wire nuts and a cable connector (not included)
Power off
Turn off the breaker or fuse before installing or servicing
The Badger manual requires a switch rated at least 1 HP, with a marked Off position, within sight of the sink opening. A light switch without that motor rating does not meet the requirement. If you'd rather not wire it yourself, an electrician can confirm the circuit and grounding in one visit.
The 5XP draws 9.5 A at average load. On a circuit shared with a dishwasher, have the circuit checked before stepping up from a Badger 1 or 5.
Recall found on cpsc.gov
What it covers
Badger disposals affected?
2018 recall 18116: InSinkErator SinkTop switch
Single Outlet SinkTop air switches, models 76703, STS-SOSN, 78251 and 74300, sold 2005 to Oct 2017; fire hazard
No; it covers the switch accessory, not disposals
Searched Oct 20, 2026. No Badger disposal recall was found. If you have an InSinkErator SinkTop air switch, check its model number against 76703, STS-SOSN, 78251 and 74300; CPSC says to stop using a recalled one and contact InSinkErator for a free replacement.
Badger install steps people get wrong
A same-mount swap uses the wrenchette and a flathead screwdriver; a new mount adds plumber's putty, and a dishwasher hookup needs pliers to pull the knockout plug. These steps, done wrong, lead to leaks, an overflow or a falling unit.
Step
What the manual says
Why it matters
Sink flange
1/2 in. rope of plumber's putty under the flange; press it in and wipe the excess
The only place putty goes
Other joints
No putty, thread sealant or pipe dope on any other connection
They can harm the disposer and leak
Dishwasher plug
Knock it out before connecting a dishwasher; it can't be put back
Left in, the dishwasher can overflow
Mounting tabs
All three tabs start on the lowest part of the three ramps; turn right until all three latch over the ridges
Unlatched tabs can leak or let the unit fall
Discharge tube
Supplied tube preferred, a straight tube allowed; keep the tube mount straight
Two bolts and a gasket seal it at the outlet
Head position
Keep your head and body out from under the unit
It can fall during install or removal
Lift & Latch changes one habit. Older Badgers had a lower ring that spun freely. On a Lift & Latch unit the ring is held by a tab, so you lift with both hands, seat the tabs on the ramps and turn right until they ride over the ridges. The wrenchette or pliers give extra leverage.
Once it's latched, the body rotates freely. Turn it to the right to line up with the plumbing, never to the left; the manual warns it could fall off the ramps.
To test for leaks, the manual says to fill the sink, pull the stopper and look under the sink as it drains. Our disposal leak guide covers drips by location.
How to clear a Badger jam and reset it
Every Badger ships with a self-service wrenchette and has a red manual reset button underneath. The manual's steps, in order:
1. Power and water off
Turn off the disposer and the water. Never put a hand in the chamber.
2. Turn the wrenchette
Put one end in the hex socket at the bottom center and work it back and forth until it turns one full revolution. Then take it out.
3. Remove the object
Reach in with long tongs or pliers, not your fingers.
4. Let it cool, then reset
Wait 3 to 5 minutes, then lightly press the red reset button on the bottom.
5. Still dead?
Check the breaker or fuse.
The manual's warning is worth repeating: remove the wrenchette before power goes back on, and never hold it while the disposer runs. For a unit that hums without spinning, see disposal humming but not spinning; for the button itself, see our reset button guide.
Can a Badger go on a septic system?
InSinkErator says yes, for a properly maintained system.
InSinkErator's septic page says its disposals are safe for properly maintained septic systems. It cites a 2019 University of Minnesota study, which found that septic systems with a disposal don't need pumping more often than those without one.
For extra margin, InSinkErator sells the Evolution Septic Guard, a 3/4 HP unit that automatically injects naturally occurring bacteria and enzymes, and a separate BOOST injection system that it says works with any InSinkErator disposal, Badgers included. Ask your septic service about your tank's size before adding a disposal.
Replacing an old Badger: which new one matches
InSinkErator's replacement guide lists suggested replacements for discontinued models. These are the rows that point to a Badger or come from one.
Old model
Motor
InSinkErator's suggested replacement
Badger 1XT, 6010
1/3 HP
Badger 1
6012
1/3 HP
Badger 1 with cord
Badger 5XT, Badger 10, 6011
1/2 HP
Badger 5
6013
1/2 HP
Badger 5 with cord
Badger 5 Plus, Badger LE, 60572
3/4 HP
Badger 5XP
MP65
5/8 HP
Badger 5XP
Badger 1HP, Badger 25ss
1 HP
Power 1.0HP
Badger 900
3/4 HP
Power 900
Badger 15SS
3/4 HP
Power 15SS
The model name is on the label on the side of the disposer. If yours isn't listed, our suggestion, not InSinkErator's: match the motor size and pick the height that fits. InSinkErator's product pages show the Badger 1HP and Contractor 333 as discontinued.
How to choose your Badger
Main kitchen, normal use
Badger 5. Five years of in-home coverage at the shorter 11-1/2 in. height.
Main kitchen, heavy use
Badger 5XP, if you have 12-5/8 in. of room. Stainless grind parts and 3/4 HP.
Bar sink, cabin or rental
Badger 1. Same body as the Badger 5 with the lightest load.
Store only has a 500 or 5XL
InSinkErator's manual gives it the Badger 5's height and 5-year warranty. Its motor and grind parts aren't on a maker spec sheet we found.
Ceramic sink or you want it quiet
Skip the Badgers. InSinkErator recommends Evolution for ceramic sinks.
Question
If yes
If no
Is this the main kitchen sink?
Badger 5 or 5XP
Badger 1 is enough
Do you have 12-5/8 in. below the sink?
Badger 5XP if you grind a lot
11-1/2 in. or more: Badger 5. Less: measure for a compact unit
Is the sink ceramic, or does noise matter?
Look at Evolution instead
Any Badger
Is there a switched, grounded outlet under the sink?
A corded unit, or a no-cord unit with the CRD-00 kit
No-cord version, if a switched, grounded supply is already there to hard wire
Questions people ask
Is a Badger 500 the same as a Badger 5?
They share a group in InSinkErator's Badger manual 138440, with the same 11-1/2 in. height and 5-year in-home warranty. We found no separate InSinkErator spec sheet for the 500, so its motor and grind parts aren't confirmed by the maker.
Is the Badger 500 a good garbage disposal?
InSinkErator's manual gives it the Badger 5's height and 5-year in-home warranty, which suits an everyday kitchen. We found no maker spec sheet for its motor or grind parts; the one Amazon listing we saw called it 1/2 HP. If you want those confirmed, buy the Badger 5.
Which Badger garbage disposal is best?
For most kitchens, the Badger 5: 1/2 HP and a 5-year in-home warranty at 11-1/2 in. tall. The 5XP is the stronger unit, with 3/4 HP and stainless grind parts, if you have 12-5/8 in. of room.
What is the difference between the Badger 500 and 5XL?
InSinkErator's manual treats them alike: both are in the Badger 5 group, at 11-1/2 in. tall with a 5-year warranty.
What is the difference between the Badger 1 and Badger 5?
Motor and warranty. The Badger 1 has a 1/3 HP motor and a 2-year in-home warranty; the Badger 5 has 1/2 HP and 5 years. Both are 11-1/2 in. tall with the same mount, chamber and galvanized grind parts.
Is the Badger 5XP stainless steel?
Its grind components are. InSinkErator's spec sheet lists rust-resistant stainless steel grind components for the 5XP, where the Badger 1 and 5 use galvanized steel. One Amazon listing's bullets say galvanized; the maker's spec sheet is the one to trust.
What is the Badger 7XL?
It's in the Badger 5XP group of InSinkErator's manual, with the 5XP's 12-5/8 in. height and 6-year in-home warranty.
Does a Badger garbage disposal come with a power cord?
Some do. InSinkErator sells each Badger with or without a factory cord, and the corded versions are labeled W/C. For a no-cord unit, InSinkErator recommends its CRD-00 cord with a grounding plug, or it can be hard wired.
Where is the reset button on a Badger disposal?
On the bottom of the unit. It's red. InSinkErator says to turn the power off, clear the jam, let the motor cool 3 to 5 minutes, then press it lightly.
Can a Badger grind chicken bones?
InSinkErator lists chicken bones for its Advanced Series only. Its Badger food list stops at softer scraps like rice, pasta, citrus rinds and egg shells, and its FAQ says the Standard Series can't grind fibrous foods like banana peel or celery.
Is a Badger disposal OK on a septic system?
InSinkErator says its disposals are safe for properly maintained septic systems, and it cites a 2019 University of Minnesota study. It also sells a BOOST injection system that adds bacteria and enzymes, and says it works with any InSinkErator disposal.
How we compared them
Why trust us
Written by Isaac Daniels, a licensed journeyman plumber in Georgia (license #JP507711). Specs and warranty terms come from InSinkErator's own manuals, spec sheets, warranties and web pages; recall facts from CPSC; seller and stock facts from Amazon.
How we compare
Facts come from InSinkErator's manual, spec sheets, warranties and FAQ pages, CPSC recall records and the Amazon listings, with Google Shopping sightings and one Reddit r/Plumbing thread for the store-name models, all read Oct 20, 2026.
No score on any Badger, because they share a mount and chamber and differ mainly in motor, height, grind parts and warranty.
Name decoder: InSinkErator's manual 138440 for families, height and warranty; spec sheets for the three base names.
Where InSinkErator and an Amazon listing disagree, we use InSinkErator and say so.
Every linked offer checked as genuine, new, in stock and sold by Amazon.com through Amazon's Creators API on Oct 20, 2026, and the Badger 5 and Badger 1 cord-kit bundles on Oct 21, 2026.
Sources
InSinkErator Badger Series installation, care and use manual 138440 (81168 Rev B): model list, dimension table, electrical and grounding rules, install steps, care, jam release, warranty heading. insinkerator.com, read Oct 20, 2026.
InSinkErator Badger 1, Badger 5 and Badger 5XP spec sheets and in-home limited warranties: insinkerator.com, read Oct 20, 2026.
InSinkErator garbage disposal comparison chart and Badger Series page: insinkerator.com, read Oct 20, 2026.
InSinkErator FAQ, What Can I Grind, Lift & Latch, septic safe, replacement guide and authorized reseller list pages: insinkerator.com, read Oct 20, 2026.
Amazon listings for the Badger 1, 5 and 5XP with and without cord, and the Badger 500: seller, condition, stock and bullets, read through the Creators API, Oct 20, 2026.
CPSC recall database searched for InSinkErator: Oct 20, 2026.
Google Shopping and r/Plumbing results for Badger model names: read Oct 20, 2026.
Amazon listings for B001DEQS08 (out of stock), B01IS2CVSU (Badger 1 with CRD-00 cord kit) and B00004U9JP (title, features, seller, stock): read through the Creators API, Oct 21, 2026.
Amazon listings for B00PM8STLM and B00004U9JO (both out of stock) and B08V5PDWPM (Badger 5 with CRD-00 cord kit: title, features, seller, stock): read through the Creators API, Oct 21, 2026.