For the longest reach, pick the Moen Renzo CA87316SRS pull-out. For a thicker deck, the Moen Integra 67315C. To connect a garden hose, the Delta 2121LF.
Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
This guide compares three laundry sink faucets using Moen’s and Delta’s own spec sheets.
Laundry sink faucets compared (maker spec sheets)
On a phone, swipe or scroll the table sideways to see every column.
| Model | Type | Holes | Spray | Max. deck |
|---|---|---|---|---|
| Moen Renzo CA87316SRS | Single-handle pull-out | 1 or 3 | Pull-out wand, 68-in. hose | 2 in. |
| Moen Integra 67315C | Single-handle pull-out | 1 or 3 | Pull-out wand, 59-in. hose | 2-1/2 in. |
| Delta 2121LF | Two-handle, hose-thread spout | 2 or 3, 4-in. centers | None (hose thread) | 1-1/8 in. |
A laundry or utility sink faucet does rougher work than a kitchen faucet: filling buckets, rinsing paint brushes, soaking stains. The two useful features are reach, from a pull-out wand, and a hose-thread spout you can screw a garden hose onto. The three faucets here cover both. Our utility sink guide covers the tubs themselves and two basic Moen laundry faucets, the 74998 and the Commercial 8277, which we do not repeat here.
Moen Renzo CA87316SRS: pull-out wand for a deep tub
Choose the Renzo for a single lever and a wand that reaches the corners of a deep laundry tub. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/ca87316sp.pdf) lists a pull-out spray with a 68-inch braided hose, Duralock quick connect, flexible supplies with 3/8-inch compression fittings, a lever with 120 degrees of travel that operates with less than 5 pounds of force, a spout that rotates 120 degrees, stream or spray mode whether pulled out or docked, the 1255 cartridge and a 1.5 gpm aerator limit.
Moen says it installs through one or three holes, 1-1/2 inches in diameter, with a 2-inch maximum deck. Amazon titles it a kitchen or laundry faucet. On October 15, 2026, the standard new offer sold by Amazon.com was in stock with model CA87316SRS, Spot Resist Stainless.
Check Moen Renzo CA87316SRS pull-out kitchen or laundry faucet on Amazon →
Moen Integra 67315C: pull-out, thicker deck allowance
Choose the Integra for a pull-out wand on a thicker sink deck. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/67315sp.pdf) lists metal construction, a pull-out spray with a 59-inch braided hose, flexible supplies with 3/8-inch compression fittings, a lever with 100 degrees of travel and less than 5 pounds of force, a 120-degree spout rotation, stream or spray mode, the 1255 Duralast cartridge and a 1.5 gpm flow at 60 psi.
It installs through one or three 1-1/2-inch holes and allows a 2-1/2-inch deck, more than the Renzo. The sheet lists Moen’s lifetime limited warranty to the original homeowner, 10 years multifamily and 5 years commercial. On October 15, 2026, the standard new offer sold by Amazon.com was in stock with model 67315C, chrome.
Check Moen Integra 67315C pull-out kitchen and laundry faucet on Amazon →
Delta 2121LF: two handles and a hose-thread spout
Choose the Delta 2121LF if you want to connect a hose. Delta’s spec sheet (media.deltafaucet.com) lists a two-handle deck faucet for exposed mounting on two or three-hole sinks, a solid brass cast body, a spout that swivels 360 degrees and has a hose thread, interchangeable hot and cold stems, a rotating-cylinder control with a stainless steel plate and replaceable seats, and 1/2-inch NPSM threaded shanks.
It mounts on 4-inch centers with a 1-1/8-inch maximum deck. The same sheet covers the 2123LF, which has a stream straightener instead of hose threads. On October 15, 2026, the standard new offer sold by Build.com showed limited stock with model 2121LF, chrome.
Check Delta 2121LF two-handle laundry faucet on Amazon →
Pull-out wand or hose thread?
Pull-out wand. The Renzo and Integra wands pull out on long braided hoses, 68 and 59 inches, so you can rinse the sides of a deep tub or fill a bucket sitting on the floor. They use the same 1255 cartridge, which keeps repairs simple, and both run at 1.5 gpm. Both Moen sheets say the spray works in stream or spray mode whether the wand is pulled out or docked.
Swing. The two Moen spouts rotate 120 degrees; the Delta spout swivels a full 360 degrees, which helps if the faucet sits between two tubs or you want to swing it fully out of the way.
Hose thread. The Delta 2121LF spout takes a garden hose directly, handy for filling a mop bucket, a carpet cleaner or a fish tank across the room. It has no spray, and Delta does not list a flow limit in the sheet text we read.
Holes. If your tub has two or three holes on 4-inch centers, the Delta fits them directly; the Moen pull-outs mount in one hole, or three with a deck plate, so check what your tub has before ordering.
Installing on a laundry tub
Deck thickness. Measure the tub rim where the faucet sits. The Delta allows 1-1/8 inches; the Renzo 2 inches; the Integra 2-1/2 inches.
Supply lines. The Moen pull-outs come with flexible supplies ending in 3/8-inch compression fittings; the Delta has 1/2-inch NPSM shanks, so plan supply lines that match your shutoff valves.
Wand hose. A pull-out needs room under the sink for the hose to hang and retract. Check that the tub legs, cabinet or drain do not block it.
Older versions and close cousins
Older Renzo. Moen also publishes a sheet for the earlier 87316 Renzo, without the CA prefix. That version lists the 1225 cartridge, Hydrolock quick connect, 1/2-inch IPS connections and a 2.2 gpm aerator, against the 1255 cartridge, Duralock connections and 1.5 gpm on the current CA87316. If you are repairing an older Renzo, check the model number under the sink before ordering a cartridge; our Moen cartridge guide explains the difference.
Delta 2123LF. Delta’s 2121LF sheet also covers the 2123LF, the same two-handle body with a stream straightener on the spout instead of hose threads. Pick the 2121LF if you will ever attach a hose, the 2123LF if you only want a smooth stream.
Warranty. Delta lists a lifetime limited warranty on parts and finish for homeowners, 10 years for multifamily housing and 5 years for other commercial uses.
Check these before you order
- Holes. One hole for the Moen pull-outs, or three with a plate; two or three on 4-inch centers for the Delta.
- Deck. 1-1/8 to 2-1/2 inches maximum by model.
- Hose. Only the Delta 2121LF has a hose-thread spout.
- Reach. The Renzo has the longest wand hose.
- Cartridge. Moen 1255 on both Moens; Delta rotating cylinder on the 2121LF.
- Seller. The Delta link is a third-party seller with limited stock.
Which laundry sink faucet should you buy?
For the longest reach, the Moen Renzo CA87316SRS. For a pull-out on a thicker deck, the Moen Integra 67315C. To connect a hose, the Delta 2121LF. For the tubs themselves, see our utility sink guide; for heavy floor sinks, our mop sink faucet guide.
Frequently asked questions
Can I use a kitchen faucet on a laundry sink?
Yes. The Moen Renzo and Integra are sold as kitchen or laundry faucets.
Which laundry faucet takes a garden hose?
The Delta 2121LF spout has a hose thread, per Delta.
How long is the Moen Renzo pull-out hose?
68 inches, per Moen.
What hole spacing does the Delta 2121LF fit?
Two or three holes on 4-inch centers.
What cartridge do the Moen laundry faucets use?
Both list the Moen 1255 cartridge.
How we chose
This document-based guide makes no hands-on testing claim. We read Moen’s spec sheets for the CA87316 and 67315 and Delta’s sheet for the 2121LF. On October 15, 2026, we checked each linked standard new Amazon offer for model, seller, stock and an add-to-cart button. Read our selection method and about Plumbing Picks.
Primary sources
- Moen CA87316 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/ca87316sp.pdf): Renzo pull-out.
- Moen 67315 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/67315sp.pdf): Integra pull-out.
- Delta 2121LF spec sheet (media.deltafaucet.com): hose-thread laundry faucet.