
Plumbing cost estimator
Pick the job and your state. You get a dated national range, a state-scaled range and the part you can fit yourself.

The short answer
A drain clog or toilet repair runs $149 to $549 nationally (cost guide, Apr 2026). A running toilet is often a parts-only fix you can do yourself.
Skip the toilet call: Fluidmaster K-400H-039
Check it on Amazon
- For a running or slow-filling toilet
- Fluidmaster K-400H-039 kit
- For sink, tub and shower clogs
- RIDGID Power Spin 41408
- For capping a burst 1/2 inch line
- SharkBite Max UR514A cap
As an Amazon Associate I earn from qualifying purchases. Disclosure.
Three tools that can replace a service call
Each one matches a job in the estimator: a running toilet, a clogged sink or tub, and a burst branch line. They do different jobs, so they aren’t scored against each other.



SharkBite Max UR514A cap
For capping a burst 1/2 inch line
Check it on Amazon
The 1/2 inch cap is sold as a pack of 4.
Estimate your plumbing job
Choose a job and your state. The national range comes from the cost guide dated in the result, and the state range is scaled by what plumbers earn where you live.
Unclog a drain, U.S. average: $186 to $549 (cost guide, updated Apr 9, 2026). The average is $331.
Use the result to sanity-check a quote, not to replace one. A plumber who has seen the job can price access, code upgrades and permits that no guide can. If a quote lands far outside the range, ask what’s driving it. Often it’s a wall that has to be opened or a shutoff valve that won’t close.
The state range scales the whole national figure by your state’s plumber wage. That over-corrects a little, because parts cost about the same everywhere and only the labor share moves with wages. Read it as a direction, not a bid.
National prices for 11 common plumbing jobs
Each range is the national figure the guide publishes. I read every page on Oct 23, 2026.
| Job | National range | Typical | Source and update | What the price covers |
|---|---|---|---|---|
| Unclog a drain | $186 to $549 | $331 (average) | Cost guide, Apr 9, 2026 | Hourly or flat rate. Some plumbers include a camera look with the cleaning. |
| Repair a toilet | $149 to $355 | $230 (most pay) | Cost guide, Apr 9, 2026 | Parts plus labor. Simple repairs typically take an hour or two. |
| Install a toilet | $254 to $615 | $396 (most pay) | Cost guide, Aug 5, 2025 | The repair guide puts install labor alone at $70 to $190, with the toilet on top. |
| Install a faucet | $120 to $300 | $185 (average) | Cost guide, Jul 14, 2025 | Labor only. The guide puts the faucet itself at $100 to $350. |
| Fix a burst pipe | $234 to $771 | Not given | Cost guide, Apr 9, 2026 | Hourly plus materials. Water damage repair is separate. |
| Repair a water heater | $285 to $1,170 | $578 (average) | Cost guide, Oct 15, 2025 | Depends on what failed. The guide notes a leaking tank may not be repairable. |
| Replace a tank water heater | $698 to $2,036 | $1,193 (most pay) | Cost guide, Jul 7, 2025 | Labor and materials, including hauling the old heater away. |
| Install a tankless water heater | $717 to $2,090 | $1,225 (average) | Cost guide, Jan 30, 2025 | Installation only. The heater itself is extra. |
| Install a garbage disposal | $138 to $272 | $194 (most pay) | Cost guide, Jul 1, 2026 | You can buy the disposal yourself or have the plumber supply it. |
| Install a sump pump | $476 to $1,462 | $834 (most pay) | Cost guide, Aug 5, 2025 | Pump type, size and how hard the pit is to reach drive the price. |
| Install a water softener | $564 to $1,692 | $958 (most pay) | Cost guide, Aug 5, 2025 | Lower if the house is pre-plumbed for a softener. |
Two things jump out. Most repairs top out under $800, with water heater repair the exception at $1,170. Installing a water heater, sump pump or softener starts near $500 and can pass $2,000. And the ranges are wide: the drain figure covers every clog location, from a bathroom sink to the main line.
Watch what each figure includes. The tank water heater figure covers labor and materials and hauling the old heater away. The tankless figure is installation only, with the heater on top. The faucet figure is labor only. Comparing a quote to the wrong kind of number is the most common way to think you’re being overcharged.
Fluidmaster K-400H-039: the running-toilet fix
Matches the $149 to $355 toilet repair job, where most people pay $230 (cost guide, Apr 9, 2026).
A toilet that runs or refills on its own is usually a worn flapper or a tired fill valve. This kit has both: Fluidmaster’s 400H PerforMAX fill valve and its 502 flapper for 2 inch flush valves. Fluidmaster says it fits 2 inch flush valve toilets, including Kohler, Toto and American Standard. I’ve used it.
The fill valve has separate tank and bowl water level dials and an EZ-twist height adjustment. Fluidmaster’s kit page says the height adjusts from 10 to 15 inches to fit most tanks. Measure yours before you buy. The kit carries a 7 year warranty.
One rule to follow: Fluidmaster says in-tank drop-in cleaners with bleach or chlorine damage tank parts, can cause flooding and void the warranty. If you use those tablets, that may be why the old parts failed.
Skip it if your toilet has a 3 inch flush valve, a flapperless tank or a cracked tank. Those need a different kit or a plumber. The kit doesn’t include tank bolts or a tank-to-bowl gasket, so a leak between the tank and bowl needs other parts.
Where it saves you a call
- Replaces both common running-toilet parts in one box
- Tank and bowl water levels adjust separately
- 7 year warranty from Fluidmaster
What to watch
- 2 inch flush valves only
- Fill valve height adjusts 10 to 15 inches only
- No tank bolts or tank-to-bowl gasket
RIDGID Power Spin 41408: the sink and tub clog fix
Matches the $186 to $549 drain cleaning job (cost guide, Apr 9, 2026).
The Power Spin is a small drum auger with 25 feet of 1/4 inch MAXCORE cable. RIDGID rates it for lines up to 1-1/2 inch: bathroom and kitchen sinks, tub and shower drains. The AUTOFEED trigger pushes and pulls the cable, and you can spin it by hand or with a drill at up to 500 rpm. I’ve used it.
RIDGID’s manual has rules worth knowing before you start. It isn’t recommended for toilets. On a tub, don’t feed it through the drain itself, because that damages the cable; take off the overflow plate and go in there. Keep the drum within 4 inches of the drain, and wear leather work gloves and safety glasses.
Skip it for a main line or a toilet clog. A main line is wider than the 1-1/2 inch lines RIDGID rates it for, and the manual warns that piping in poor condition can be damaged by drain cleaning. If water backs up in more than one fixture, the clog is usually in a shared line, which is a job for a plumber.
Where it saves you a call
- Reaches past the trap on sinks, tubs and showers
- Hand or drill drive, up to 500 rpm
- AUTOFEED feeds and pulls the cable
What to watch
- Not recommended for toilets
- Lines up to 1-1/2 inch only
- Tub use means removing the overflow plate
SharkBite Max UR514A: the burst-line stopgap
Buys time on the $234 to $771 burst pipe job (cost guide, Apr 9, 2026), so the repair can wait for daytime rates.
When a branch line splits, the fastest way to get water back to the rest of the house is to cut the line back to sound pipe and cap it. The UR514A is a brass push cap for 1/2 inch nominal pipe. SharkBite lists PEX, copper, CPVC, PE-RT and HDPE pipe made to named standards, and an insertion depth of 1 inch. I’ve used it.
The pipe must reach the tube stop. SharkBite says to mark the depth on the pipe and check the mark after you push it in. Taking it off needs a SharkBite disconnect clip or tongs, and SharkBite says Max fittings are meant to be permanent, not for repeated on and off.
Skip it on galvanized pipe: SharkBite says Max fittings shouldn’t go on galvanized tubing. Also skip it near fresh solder work, since SharkBite says to make solder joints first and keep flame away from the fitting. For a 3/4 inch line, SharkBite’s matching cap is the UR518A with a 1-1/4 inch depth.
Where it saves you a call
- Caps a cut 1/2 inch line with no torch or glue
- Works on PEX, copper, CPVC, PE-RT and HDPE
- Lets the rest of the house have water tonight
What to watch
- Not for galvanized pipe
- Needs a clean, square cut at the right depth
- Removal needs a SharkBite clip or tongs
Specs from Fluidmaster’s K-400H-039 product page and instructions, RIDGID’s Power Spin 41408 operator’s manual and the SharkBite Max installation guide (2024-07). Offers read from Amazon’s product data on Oct 23, 2026, 1:00 AM EDT: all three new and in stock.
Which tool matches which job
Each row lists the job it can replace and where it stops being the right fix.
| Tool | Key specs | Job it can replace | Pick it if | Skip it if |
|---|---|---|---|---|
| Fluidmaster K-400H-039 kit | 400H fill valve + 502 flapper, 2 inch flush valve, 7 year warranty | Toilet repair, $149 to $355 | The toilet runs, refills on its own or fills slowly. | It has a 3 inch flush valve, no flapper or a cracked tank. |
| RIDGID Power Spin 41408 | 25 ft of 1/4 inch cable, lines to 1-1/2 inch, drill up to 500 rpm | Drain cleaning, $186 to $549 | One sink, tub or shower drains slowly or stops. | The toilet is clogged or several fixtures back up at once. |
| SharkBite Max UR514A cap (pack of 4) | 1/2 inch CTS, 1 inch insertion depth, brass | Burst pipe call, $234 to $771 | A 1/2 inch branch line split and you can cut back to sound pipe. | The pipe is galvanized or the break is on the main. |
How plumber pay changes the price by state
Labor is the biggest moving part of a plumbing bill. The U.S. mean plumber wage is $34.70 an hour (BLS, May 2025).
Oregon tops the list at $47.33 an hour, and Arkansas is lowest at $24.35. That’s close to a two-to-one gap in what the same trade earns. The estimator multiplies the national range by your state’s share of the U.S. mean, so a $230 toilet repair reads about $310 in Oregon and $160 in Arkansas.
Keep in mind these are wages, not the rate on your bill. The BLS puts the U.S. mean wage at $34.70 an hour, while average billed rates run $85 to $100 an hour, because the shop also pays for the truck, insurance, tools and office. I use wages as the yardstick because the BLS publishes them for every state, and no one publishes billed rates that way.
| State | Mean hourly wage | Share of U.S. mean |
|---|---|---|
| Alabama | $27.77 | 80% |
| Alaska | $43.49 | 125% |
| Arizona | $32.66 | 94% |
| Arkansas | $24.35 | 70% |
| California | $39.58 | 114% |
| Colorado | $33.22 | 96% |
| Connecticut | $36.25 | 104% |
| Delaware | $32.75 | 94% |
| District of Columbia | $43.85 | 126% |
| Florida | $26.94 | 78% |
| Georgia | $27.99 | 81% |
| Hawaii | $39.81 | 115% |
| Idaho | $28.10 | 81% |
| Illinois | $44.91 | 129% |
| Indiana | $36.37 | 105% |
| Iowa | $33.67 | 97% |
| Kansas | $34.33 | 99% |
| Kentucky | $33.11 | 95% |
| Louisiana | $30.11 | 87% |
| Maine | $32.00 | 92% |
| Maryland | $35.34 | 102% |
| Massachusetts | $43.46 | 125% |
| Michigan | $37.14 | 107% |
| Minnesota | $41.68 | 120% |
| Mississippi | $27.25 | 79% |
| Missouri | $36.06 | 104% |
| Montana | $37.59 | 108% |
| Nebraska | $31.59 | 91% |
| Nevada | $34.38 | 99% |
| New Hampshire | $31.84 | 92% |
| New Jersey | $44.51 | 128% |
| New Mexico | $29.71 | 86% |
| New York | $40.29 | 116% |
| North Carolina | $27.27 | 79% |
| North Dakota | $31.81 | 92% |
| Ohio | $33.51 | 97% |
| Oklahoma | $28.35 | 82% |
| Oregon | $47.33 | 136% |
| Pennsylvania | $37.05 | 107% |
| Rhode Island | $39.23 | 113% |
| South Carolina | $26.87 | 77% |
| South Dakota | $26.70 | 77% |
| Tennessee | $29.09 | 84% |
| Texas | $29.22 | 84% |
| Utah | $30.87 | 89% |
| Vermont | $33.16 | 96% |
| Virginia | $29.16 | 84% |
| Washington | $42.69 | 123% |
| West Virginia | $28.26 | 81% |
| Wisconsin | $40.73 | 117% |
| Wyoming | $29.76 | 86% |
What plumbers charge per hour and per visit
National cost guide figures, last updated Apr 9, 2026. These are billed rates, not wages.
| Service | Low | Average | High |
|---|---|---|---|
| Pipe repairs | $50/hr | $100/hr | $195/hr |
| Drain repairs | $50/hr | $100/hr | $176/hr |
| Pipe installation or replacement | $50/hr | $90/hr | $171/hr |
| Emergency plumbing | $50/hr | $85/hr | $200/hr |
| Toilet repair | $50/hr | $95/hr | $175/hr |
| Service call for | Low | Average | High |
|---|---|---|---|
| Clogged drain | $79 | $215 | $250 |
| Leaky pipes | $64 | $217 | $250 |
| Burst pipes | $64 | $234 | $275 |
| Gurgling sounds | $75 | $253 | $259 |
| Unpleasant odor | $69 | $231 | $250 |
| Emergency plumbing | $79 | $204 | $250 |
The guide puts plumber rates at $50 to $200 an hour nationally and service call fees at $64 to $275. Some plumbers waive the call fee if you hire them for the repair, so ask. Others charge a flat price per job instead of by the hour. It gives the example of a Denver shop that charges a $92 trip fee plus $92 an hour.
A flat price is easier to compare. An hourly quote needs three numbers to mean anything: the rate, the minimum billed time and the trip or call fee.
Questions that make two quotes comparable
Most price gaps between plumbers come from what’s in the quote, not the hourly rate.
| Ask | Why it changes the number | Which jobs it hits hardest |
|---|---|---|
| Is the fixture or appliance included? | The tankless figure leaves out the heater; the faucet figure leaves out the faucet. | Toilet, faucet, disposal, water heater, softener |
| Is hauling away the old unit included? | The tank water heater figure includes disposal of the old heater. | Water heater, toilet, disposal |
| Is the permit included? | The guide notes most towns require one for a water heater; Geneva, Illinois, charges $50. | Water heater, tankless, sump pump |
| Flat price or hourly? | Hourly quotes need the minimum billed time and trip fee to compare. | Drain, pipe repair, toilet repair |
| What if the shutoff valve fails? | An old stop that won’t close adds a valve to the job. | Faucet, toilet, pipe repair |
| Is a camera look included? | The guide says some plumbers include a video inspection with drain cleaning. | Drain cleaning |
Ask every plumber the same questions, then line the answers up. The guide also suggests a written estimate that breaks out the hourly rate and any surcharges for travel, hard-to-reach drains or emergency visits. Sending photos of the problem first tends to get you a firmer number.
What nights, weekends and holidays add
Calls outside business hours cost more. Often the fix is getting the water off and waiting.
The cost guide says weekend, after-hours and holiday calls may be billed at double or triple the usual rate, about $135 to $190 an hour. If you can stop the water, many problems can wait for a daytime visit. My emergency plumber cost guide covers what can wait and what can’t.
A running toilet, a slow drain and a dripping faucet can all wait. A burst line can too, once the water is off and the branch is capped. A gas smell can’t wait either; the emergency guide covers what to do.
When to do it yourself and when to call
The parts are cheap. The labor is where the money goes, so a small part you can fit yourself saves the most.
Replace the flapper and fill valve with a kit like the Fluidmaster K-400H-039. Fluidmaster’s instructions walk through both parts.
Pull the stopper and try a hand auger like the RIDGID Power Spin. Don’t force the cable, RIDGID says.
Shut off the water, cut back to sound pipe and cap it. Book the permanent repair in daytime hours.
Call a licensed plumber. These involve gas, venting, permits or heavy equipment, and mistakes cost far more than the labor.
The toilet repair guide says simple toilet repairs typically take an hour or two, which is why a $230 bill can be mostly labor. The garbage disposal guide says the same: parts are cheap and labor is the expense. If you’re handy, those are the jobs where DIY pays best. My drain unclogging guide and flapper vs fill valve guide go step by step.
Plumbing cost questions
How accurate is a plumbing cost estimator?
It’s a planning range. Each national figure comes from a dated cost guide, and the state range scales it by what plumbers earn in your state. A plumber who sees the job can price access, permits and code fixes that no estimator can.
How much do plumbers charge per hour?
The cost guide puts the national range at $50 to $200 an hour, last updated Apr 9, 2026. Its averages by service run $85 to $100 an hour. After-hours calls can be billed at double or triple the usual rate.
What is a plumber’s service call fee?
It covers the trip and first look. The national range is $64 to $275 depending on the problem. Some plumbers waive it if you hire them for the repair.
Why do plumbing prices change so much by state?
Labor is the largest part of most bills. The BLS puts the mean plumber wage at $47.33 an hour in Oregon and $24.35 in Arkansas (May 2025), against $34.70 nationally.
How much does it cost to unclog a drain?
The national range is $186 to $549, with an average of $331. For the main line, the same guide puts sewer line cleaning at $100 to $600 and sewer line repair at $1,800 to $3,700 in labor.
How much does it cost to replace a water heater?
The cost guide puts a tank replacement at $698 to $2,036, with most people paying $1,193, including labor, materials and hauling the old heater away. A tankless install runs $717 to $2,090 before the heater itself.
Can I fix a running toilet myself?
Usually. A worn flapper or fill valve causes most running toilets, and kits like the Fluidmaster K-400H-039 replace both. Check that your toilet has a 2 inch flush valve first.
Is it cheaper to buy the part myself?
Often, but ask first. The guide says you can supply your own garbage disposal for the plumber to install, or have the plumber buy it.
Why trust me
I’m a licensed journeyman plumber in Georgia. In my 7 years of experience, these are the products I’d install. Every price on this page carries the date its cost guide was last updated. When a guide leaves something out, such as the heater in a tankless figure, I say so next to the number.
How I pick
National job prices come from published national cost guides, built from estimates pros send customers, plus a faucet installation guide. I read all of them on Oct 23, 2026. State ranges multiply the national range by the state’s mean plumber wage divided by the U.S. mean of $34.70, using the BLS May 2025 wage survey. I round scaled figures to the nearest $10.
The three tools each match a job in the estimator and do different jobs, so they aren’t scored against each other. Each was new and in stock on Amazon when I checked, Oct 23, 2026, 1:00 AM EDT.
Sources
- National cost guides: drain cleaning cost and pipe repair cost, updated Apr 9, 2026; garbage disposal installation cost, updated Jul 1, 2026; plumber cost per hour and toilet repair cost, shown as Thu, Apr 09 (2026); water heater repair cost, shown as Wed, Oct 15; toilet installation, sump pump installation and water softener installation cost, shown as Tue, Aug 05; water heater replacement cost, shown as Mon, Jul 07; tankless water heater installation cost, shown as Thu, Jan 30. Pages that show no year are dated here by the year that weekday fell on (2025). All read Oct 23, 2026.
- Faucet installation cost guide, modified Jul 14, 2025: read Oct 23, 2026.
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, occupation 47-2152 plumbers, pipefitters and steamfitters, hourly mean wage, national and by state, read from BLS public data on Oct 23, 2026.
- Fluidmaster, K-400H-039-T14 PerforMAX fill valve and 2 inch flapper repair kit product page and instructions (fluidmaster.com).
- RIDGID, Power Spin 41408 operator’s manual (ridgid.com).
- SharkBite, SharkBite Max installation guide, 2024-07 (sharkbite.com).
- Amazon product data for every product named on this page, read on Nov 11, 2026.
- Google results for “plumbing cost estimator”, seen Oct 23, 2026.
