Single Flush vs Dual Flush Toilet

Single flush vs dual flush toilet, side by side: how each one works, the 1.28 gpf rules, how much water the small button really saves, and which of four toilets fits your house.

As an Amazon Associate I earn from qualifying purchases. Disclosure.

TOTO Aquia IV dual flush toilet
TOTO Aquia IV dual flush toilet. Product photo from Amazon.

Quick answer

Single flush is one volume; dual flush gives a reduced and a full flush. On my four picks the full flush is 1.28 gpf either way, so dual flush saves water only on the reduced button, and it adds button rods you must set right. Want the simple one? Choose single flush. Will you use the reduced button? Choose dual flush and match the exact model. Federal law allows 1.6 gpf, but California and Washington set 1.28, and MaP lists Georgia, Colorado, Texas and others as barring non-high-efficiency toilets.

My take: want dual flush? TOTO Aquia IV CST446CEMFGN (MaP 800 g) or American Standard H2Option 606AA002.020 (MaP 600 g). Want one lever? Kohler Highline K-3889 (10-inch rough-in) or Kohler Cimarron K-31621 (12-inch), both 1,000 g.

You will use the reduced button
TOTO Aquia IV
You want a light and a heavy flush button
American Standard H2Option
Your rough-in is 10 inches and you want one lever
Kohler Highline K-3889
Your rough-in is 12 inches and you want one lever
Kohler Cimarron K-31621
See the four picks

Single Flush vs Dual Flush at a Glance

The choice is smaller than the marketing makes it look. On the four toilets below the full flush is 1.28 gallons per flush (gpf) either way, and every one of them is listed by its maker as WaterSense. This page sets the rules, the water math, the MaP flush scores and the leak points side by side, from maker sheets and code.

PointSingle flushDual flush
ButtonsOne lever or button, one volumeTwo volumes: two lid buttons on the TOTO and American Standard picks
Full flush on my picks1.28 gpf (both Kohler models)1.28 gpf (TOTO and American Standard)
Reduced flushNone0.9 gpf (TOTO), 0.92 gpf (American Standard)
WaterSense count (v1.2)The tested average flush, 1.28 gpf at mostAverage of two reduced and one full flush, 1.28 gpf at most
MaP score of my picks (MaP list)1,000 g for both Kohler models800 g (TOTO), 600 g (American Standard)
Parts to watch for leaksThe flush valve seal (a canister on Kohler)The flush valve seal gasket and the button rod length

The table shows my four picks, not every toilet.

What the Rules Say

Federal. The Department of Energy sets 1.6 gpf as the maximum for gravity flush tank water closets (10 CFR 430.32(q) (ecfr.gov)). For a dual flush model, DOE’s certification rule has the maker report the flush volume observed in full-flush mode (10 CFR 429.30). So a dual flush with a 1.6 gpf full flush is legal federally.

WaterSense, version 1.2. The label needs an effective flush volume of 1.28 gpf or less. For a dual flush toilet, EPA defines that as the average of two reduced flushes and one full flush. The toilet must also clear all test media in a single flush in at least four of five attempts. EPA’s residential toilets page says version 1.2 is in effect.

WaterSense, version 2.0. EPA released it in May 2024. It drops the averaging and caps both the full and reduced flush at 1.28 gpf. EPA has paused its effective date, and version 1.2 stays in effect until further notice.

California. The California code of regulations, title 20, section 1605.3, sets 1.28 gpf, or 1.28 as the dual-flush effective flush volume, for water closets sold or offered for sale on or after January 1, 2016. Those toilets must also pass the waste extraction test.

Washington. The state plumbing code, WAC 51-56-0400 section 411.2, sets an effective flush volume of 1.28 gpf and calls for WaterSense performance criteria.

Other states. MaP lists California, Georgia, Colorado, Texas, Massachusetts, Oregon, Washington D.C. and New York City as places that bar non-high-efficiency toilets, with some exceptions. Ask your local building department.

How Much Water Does Dual Flush Save?

The full flush saves nothing. On my picks it is 1.28 gpf, the same as the single flush models. Water is saved only on the reduced button.

WaterSense’s count. TOTO: (1.28 + 2 × 0.9) ÷ 3 = 1.03 gpf. American Standard: (1.28 + 2 × 0.92) ÷ 3 = 1.04 gpf. That is about 19 to 20 percent below 1.28 (my arithmetic).

MaP’s count. MaP says the best evidence points to fewer than two reduced flushes per full flush, and for MaP PREMIUM it counts them 1 to 1. At 1 to 1: TOTO 1.09 gpf, American Standard 1.10 gpf, about 14 to 15 percent below 1.28 (my arithmetic).

Your house. EPA says a WaterSense dual flush toilet can save more water if you use the reduced flush. If your household seldom uses that button, the saving shrinks toward zero.

Here is the same math as gallons per 1,000 flushes, so you can see what the button habit is worth (my arithmetic from the maker flush volumes above).

ToiletEvery flush fullOne reduced per full (MaP count)Two reduced per full (WaterSense count)
Single flush, Kohler Highline or Cimarron1,2801,2801,280
Dual flush, TOTO Aquia IV (1.28 and 0.9)1,2801,0901,027
Dual flush, American Standard H2Option (1.28 and 0.92)1,2801,1001,040

If everyone in the house presses the full button every time, the dual flush row reads 1,280, the same as the single flush row.

My Four Picks

Two dual flush and two single flush toilets, all two-piece and elongated, with the full flush at 1.28 gpf on every one.

TOTO Aquia IV dual flush toilet CST446CEMFGN
Product photo from Amazon.

Dual Flush Pick: Skirted Two-Piece

TOTO Aquia IV Dual Flush Toilet (CST446CEMFGN)

Two-piece elongated · dual flush 1.28 and 0.9 gpf per TOTO · 12-inch rough-in (10 and 14 with TOTO’s optional Unifit kits) · TOTO Universal Height · MaP 800 g and MaP PREMIUM (MaP list, September 24, 2026) · seat sold separately

TOTO’s spec sheet lists a chrome lid push-button, WaterSense certification, California Green Building Code compliance and a minimum flowing pressure of 8 psi. On MaP’s September 24, 2026 list this model scores 800 grams and carries the MaP PREMIUM flag. TOTO’s sibling with a 1.0 gpf full flush (CST446CUMF) scores 500 grams on the same list, so match the full-flush volume when you compare.

The two buttons sit in the tank lid, full flush on the left and partial flush on the right. TOTO’s manual says to set the rod lengths so the buttons sit properly: rods too short can cause a short flush, and rods too long may keep the flush valve activated so water keeps flowing to the bowl. It also says not to use in-tank bowl cleaners, because chlorine can damage tank fittings and cause leaks.

What helps

  • TOTO lists a 0.9 gpf reduced flush
  • MaP lists 800 g and MaP PREMIUM
  • TOTO lists an 8 psi minimum flowing pressure

What to weigh

  • The full flush is 1.28 gpf, the same as the single flush picks
  • The seat is sold separately
  • Wrong button rod length can leave water flowing to the bowl (TOTO manual)

Verdict: The dual flush to buy if you will use the reduced button. Set the rods as TOTO says and keep bleach tablets out of the tank.

Check the TOTO Aquia IV (CST446CEMFGN) on Amazon
American Standard H2Option dual flush toilet 606AA002.020
Product photo from Amazon.

Dual Flush Pick: Chair Height

American Standard H2Option Dual Flush Toilet (606AA002.020)

Two-piece elongated · dual flush 1.28 and 0.92 gpf per American Standard · 12-inch rough-in · chair height, 16-1/2 in. rim · EverClean surface · MaP 600 g and MaP PREMIUM (MaP list, September 24, 2026) · seat and wax ring included, supply not included

American Standard’s product page for the 606AA002.020 lists a full flush of 1.28 gpf and a partial flush of 0.92, a chair-height elongated bowl with a 16-1/2 in. rim, the EverClean surface, and WaterSense certification. This listing is the complete toilet: the slow-close seat, chrome push-button actuator, bolt caps and wax ring are in the box.

MaP lists the H2Option 606AA002 at 600 grams. American Standard’s page for a related model, the 606CA002, says its MaP score is the highest, 1,000 grams, and this listing’s own copy repeats a 1,000-gram claim. MaP also lists H2Option versions with a 4339 tank (2887.216 and 2887.516) at 1,000 g under the name Siphonic Dual Flush. Go by the model number and the MaP list.

The flush is chosen with a chrome push button on the lid: the light side gives the 0.92 gpf flush for liquid waste and the full side gives 1.28 gpf for solid waste. Because the seat and wax ring are included, the supply line is the only separate part the install still needs.

What helps

  • Lists a 0.92 gpf partial flush
  • MaP PREMIUM on the MaP list
  • Seat and wax ring are in the box

What to weigh

  • MaP score of 600 g is the lowest of the four picks
  • Needs a 12-inch rough-in at minimum
  • Supply line is not included

Verdict: A fair dual flush if you want chair height with the seat in the box. Its MaP number is the lowest on this page.

Check the American Standard H2Option (606AA002.020) on Amazon
Kohler Highline K-3889 toilet
Product photo from Amazon.

Single Flush Pick: 10-Inch Rough-In

Kohler Highline K-3889 Comfort Height Toilet (1.28 gpf)

Two-piece elongated · 1.28 gpf single flush · 10-inch rough-in · Comfort Height · Class Five canister · MaP 1,000 g (MaP list, September 24, 2026) · seat and supply line sold separately

Kohler’s spec sheet (June 2024) lists 1.28 gpf, a left-hand polished chrome trip lever, a 2-1/8 inch trapway, an 11-3/8 by 8 inch water surface and a 10 inch rough-in. Its code list includes WaterSense, the California Energy Commission, ADA and ICC/ANSI A117.1. MaP’s list scores K-3889 at 1,000 grams.

This is one lever and one volume, so there is no button rod to set. The flush valve is a Kohler canister, not a standard flapper; see my Kohler canister seal guide. The Amazon listing’s description text talks about a different Kohler line, so go by Kohler’s sheet and the model number in the title, and measure your rough-in before you order.

What helps

  • Kohler’s sheet lists 1.28 gpf on one lever
  • MaP lists 1,000 g
  • Kohler’s sheet lists WaterSense and the California Energy Commission

What to weigh

  • Built for a 10-inch rough-in, so measure first
  • No reduced flush option
  • Seat and supply line are sold separately

Verdict: The simple pick if your rough-in is 10 inches and you want one lever with a top MaP number.

Check the Kohler Highline K-3889 (10-inch rough-in) on Amazon
Kohler Cimarron K-31621 toilet
Product photo from Amazon.

Single Flush Pick: 12-Inch Rough-In

Kohler Cimarron K-31621 Comfort Height Toilet (1.28 gpf)

Two-piece elongated · 1.28 gpf single flush · standard 12-inch rough-in · Comfort Height · AquaPiston canister · MaP 1,000 g (MaP list, September 24, 2026) · seat and supply line sold separately

Kohler’s spec sheet lists 1.28 gpf, a left-hand polished chrome trip lever, a 2-1/8 inch trapway and a standard 12 inch rough-in. Its code list includes WaterSense, the California Energy Commission, ADA and ICC/ANSI A117.1. MaP’s list scores the K-31621 pairing at 1,000 grams.

Kohler says the AquaPiston canister needs less force to flush than a 3 inch flapper and has 90 percent less exposed seal material. That is Kohler’s claim. Like the Highline it has one lever and no button rods. The Amazon listing names K-31621-0 as the model.

What helps

  • Kohler lists a canister flush valve instead of a flapper
  • MaP lists 1,000 g
  • Kohler’s sheet lists a standard 12-inch rough-in

What to weigh

  • No reduced flush option
  • Seat and supply line are sold separately
  • The canister seal is a Kohler-specific part

Verdict: The single flush pick for a standard 12-inch rough-in, with a top MaP number.

Check the Kohler Cimarron K-31621 on Amazon

Which to Buy for Your Household

Match the toilet to how your house actually flushes.

Your situationMy pickWhy
People in the house will press the small button for liquid wasteDual flush: TOTO Aquia IVEPA says a WaterSense dual flush saves more if you use the reduced flush; TOTO lists 0.9 gpf.
People will press whichever button is closest, or always the big oneSingle flush: Kohler Cimarron or HighlineThe full flush is 1.28 gpf on all four, so the saving shrinks toward zero.
Guests or kids need to know which button does whatDual flush: American Standard H2OptionIts two lid buttons give a light flush for liquid waste and a full flush for solid waste.
The bathroom has a 10-inch rough-inSingle flush: Kohler Highline K-3889The only 10-inch model of the four; measure first.
Low supply pressure at the toiletDual flush: TOTO Aquia IVTOTO lists an 8 psi minimum flowing pressure; American Standard calls for at least 20 psi.
You want the fewest parts to adjust laterSingle flush: either KohlerOne lever and no button rods to set.

Flush Performance and What the MaP Scores Say

What MaP measures. It is a test to failure with soybean paste and toilet paper, up to 1,000 grams. MaP says WaterSense and the ASME standard pass or fail a model at 350 grams. MaP calls 600 grams or more excellent and says 500 or more is exceptional.

My four models. Kohler Highline K-3889 and Cimarron K-31621, 1,000 g. TOTO CST446CEMFGN, 800 g. American Standard 606AA002, 600 g. All four carry the WaterSense flag on the list.

No simple rule. TOTO’s Drake CST776CSFG, a 1.6 gpf single flush, also scores 1,000 g on the list. TOTO’s 1.0 gpf dual flush sibling scores 500. Four models do not make a trend, so read the score for the exact model number.

Which button? The MaP list does not say which button was tested. American Standard labels its light flush for liquid waste, and MaP says dual flush is meant to use the reduced flush for liquids.

Dual Flush Buttons, Valves and Slow Leaks

Button styles. My TOTO and American Standard picks have two lid buttons. American Standard also lists ADA dual flush models with paddles, where you push the paddle full stroke and release quickly. Fluidmaster’s Duo Flush kit is a lever: up for a half flush, down for a full one.

Rod length. Both makers tell you to adjust the button rods. TOTO says each full turn is 1 mm and warns that rods too long may let water flow to the bowl. American Standard says to turn the white rod one turn counterclockwise at a time if the toilet does not flush properly, and to turn it back 1/2 turn clockwise if the flush valve then stays open.

The seal. TOTO’s manual has a Servicing the Flush Valve section: remove the rubber seal gasket, rinse it and reinstall. TOTO’s parts manual lists the flush valve seal gasket as 9BU112E-A, and THU744 as a 10-piece pack. See my TOTO flapper and seal page. Korky sells dual flush seals, but its fit list names American Standard tanks 4339, 4348, 4349 and 4000 and TOTO ST453U, not the tanks in my picks. Buy the seal for your tank, not for “dual flush.”

Dye test. The ghost-flush pattern is a slow leak. My phantom flushing guide has the dye test. My advice: on a dual flush toilet, inspect the flush valve seal where that guide says flapper.

Water pressure. TOTO lists a minimum flowing pressure of 8 psi. American Standard’s troubleshooting calls for at least 20 psi.

Retrofit Dual Flush Kits

Fluidmaster Duo Flush (550DFR). The installation guide (rev. 04/15) says it is not intended as a retrofit for 1.28 or 1.0 gpf toilets, and lists as not compatible 3-inch flush valves, Kohler side-mount valves, Mansfield flush valves, ballcock fill valves and some low-boy one-piece tanks. Some of these can be swapped for a part Fluidmaster names first. You set the half and full dials by flushing with toilet paper.

Availability. A search for “dual flush” on Fluidmaster’s US site returned no results on September 29, 2026, so I link no kit.

Korky. Its dual flush page is for replacement seals, not a conversion kit.

Before You Buy

Measure the rough-in. The Highline is a 10-inch model. The other three are 12-inch at minimum or standard. See toilet rough-in size.

Pick the bowl and height. Round vs elongated, comfort height vs standard, and compact toilets for small bathrooms cover fit. All four picks are two-piece and elongated; for one-piece, see one-piece vs two-piece.

Check your state. California and Washington need 1.28 gpf or less, and MaP lists several more states, Georgia among them, that bar non-high-efficiency toilets. Use the volume on the maker sheet for your exact model.

Compare the exact model number. Family names hide different MaP scores and full-flush volumes.

Keep bleach out of the tank. TOTO and Fluidmaster both warn that in-tank chlorine cleaners damage fittings.

FAQ

Is a dual flush toilet better than a single flush toilet?

Not on every point. On the models here the full flush is 1.28 gpf either way, so a dual flush saves water only when you press the reduced button. It also adds two buttons whose rods must be set right. MaP scores for the four models here run from 600 to 1,000 grams, so check the score for the exact model.

Can I still buy a 1.6 gpf toilet?

Federal rules still allow 1.6 gpf for gravity flush tank toilets (10 CFR 430.32(q)). California sets 1.28 gpf for water closets sold since January 1, 2016, and Washington’s plumbing code sets an effective flush volume of 1.28 gpf. A 1.6 gpf single flush toilet does not meet either rule. MaP also lists Georgia, Colorado, Texas, Massachusetts, Oregon, Washington D.C. and New York City as barring non-high-efficiency toilets, with some exceptions. Check your local code.

Why does my dual flush toilet keep refilling or running?

The makers point to a few causes. TOTO says button rods that are too long may keep the flush valve activated and let water flow to the bowl, and that chlorine in-tank cleaners can damage tank fittings. American Standard lists a leaking or deformed flapper seal or debris on the seal surface, and says a button rod turned out too far can hold the flush valve open. Run a dye test, then start with the button rods and the seal.

Can I add a dual flush kit to my toilet?

Fluidmaster’s Duo Flush installation guide says the kit is not intended for 1.28 or 1.0 gpf toilets and is not compatible with 3-inch flush valves or Kohler side-mount valves. I did not find a Fluidmaster dual flush product on its current site, so I do not link a kit.

How does WaterSense count a dual flush toilet?

Under specification version 1.2, the effective flush volume is the average of two reduced flushes and one full flush, and it must not exceed 1.28 gpf. Version 2.0 would cap both modes at 1.28 gpf, but EPA has paused its effective date, so version 1.2 stays in effect until further notice.

Bottom Line

Single flush and dual flush are close. The full flush is 1.28 gpf on all four picks, so dual flush only saves water if you press the reduced button. Choose the TOTO Aquia IV or American Standard H2Option if you will, and keep the button rods set as the maker says. Choose the Kohler Highline (10-inch rough-in) or Cimarron (12-inch) for one lever. Match the exact model number, and check your state’s 1.28 gpf rule.

How I Picked These Toilets

Why trust me

I’m Isaac Daniels, a licensed journeyman plumber in Georgia. In my 7 years of experience, these are the products I’d install.

Every size, rating, dimension and spec on this page comes from the manufacturer pages and documents listed below, which I opened and read, or from the Amazon listing I link. Nobody pays to be included here.

Picks follow the method in How I pick: maker documents, parts availability and fit, never commission rates.

About Isaac · Questions or corrections

How I checked

  • Flush rules come from the eCFR (10 CFR 430.32 and 429.30), the California and Washington codes, and EPA’s WaterSense pages.
  • MaP scores come from MaP’s list dated September 24, 2026, matched by exact model number.
  • Flush volumes, rough-ins, pressures and button adjustments come from the TOTO, American Standard and Kohler spec sheets and manuals.
  • Listings were checked for model number, new condition and stock on Nov 11, 2026. A CPSC recall search on Nov 11, 2026 found no recall on these four toilets.

Sources

  1. US EPA WaterSense: Residential Toilets (status of specification versions 1.2 and 2.0) (epa.gov)
  2. US EPA: WaterSense Specification for Tank-Type Toilets, Version 1.2 (June 2, 2014) (epa.gov)
  3. US EPA: WaterSense Specification for Tank-Type Toilets, Version 2.0 (May 2024, effective date paused) (epa.gov)
  4. eCFR: 10 CFR 430.32, water closets (paragraph q) (ecfr.gov)
  5. eCFR: 10 CFR 429.30, water closet certification reports (ecfr.gov)
  6. Cal. Code Regs. tit. 20, § 1605.3 (Cornell LII copy), plumbing fixtures Table I (law.cornell.edu)
  7. Washington WAC 51-56-0400, Chapter 4 plumbing fixtures (section 411.2) (app.leg.wa.gov)
  8. MaP Testing: toilet types (single-flush, dual-flush and effective flush volume) (map-testing.com)
  9. MaP Testing: MaP PREMIUM requirements (map-testing.com)
  10. MaP Testing: FAQ (map-testing.com)
  11. MaP Testing: background and test method (map-testing.com)
  12. MaP Testing: all tank-type toilets list with MaP scores (dated September 24, 2026) (map-testing.com)
  13. TOTO: CST446CEMFGN Aquia IV spec sheet SS-02061 (totousa.com)
  14. TOTO: Aquia IV CST446 installation and owner’s manual (totousa.com)
  15. TOTO: Aquia IV parts manual PD-01451 (totousa.com)
  16. American Standard: H2Option 606AA002.020 chair height toilet with seat and wax ring, product page (americanstandard-us.com)
  17. American Standard: H2Option 2886/2887/2889 installation guide with troubleshooting (lixil.cdn.celum.cloud)
  18. American Standard: H2Option 606CA002 product page (americanstandard-us.com)
  19. Kohler: Highline K-3889 spec sheet (6-8-2024) (resources.kohler.com)
  20. Kohler: Cimarron K-31621 spec sheet (resources.kohler.com)
  21. Fluidmaster: Duo Flush 550DFR dual flush valve installation guide (Part 25-0183, rev. 04/15) (fluidmaster.com)
  22. Korky: Dual Flush Toilet Flush Valve Seal Kit 440 (fit list) (korky.com)
  23. Amazon listings for the four products linked above, including the model numbers they carry
  24. U.S. Consumer Product Safety Commission recall search for these four toilets (saferproducts.gov, Nov 11, 2026): no recall.