Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
A frozen pipe that bursts is one of the most expensive plumbing failures a homeowner can experience — repairs start at $500 and go up fast if the burst is inside a wall. The prevention costs under $30 and takes an afternoon. As a plumber who gets emergency calls every winter for burst pipes, I can tell you: the time to insulate is before the first freeze, not after.
| Product | Best For | Price |
|---|---|---|
| Frost King PE Pipe Insulation Foam | Best Overall | ~$8/6ft |
| M-D Building Products Pipe Wrap | Best for Irregular Shapes | ~$12 |
| Heat tape (Wrap-On 31024) | Best for Extreme Cold | ~$25 |
Best Overall: Frost King PE Foam Pipe Insulation
closed-cell polyethylene foam · pre-slit self-seal (no taping) · fits 1/2 in to 1 in pipe (copper, PEX, CPVC) · 6 ft tubes · wall thickness 3/8 in to 1 in
Closed-cell polyethylene foam insulation is the standard for protecting pipes in unheated spaces — crawl spaces, garages, basements, and attics. It comes pre-slit so you snap it onto the pipe without cutting. Available in 3/8″, 1/2″, 3/4″, and 1″ pipe diameters. The self-sealing adhesive strip on some versions makes installation fast with no tape required.
In temperatures down to about 20°F with a well-insulated space, foam insulation alone is sufficient. Below that, or for pipes in truly unheated exterior walls, you’ll want heat tape instead.
- ✅ Pre-slit — snap onto pipe, no cutting
- ✅ Available in all standard pipe sizes
- ✅ Cheap — covers 6 feet for around $8
- ✅ Also reduces condensation in summer
- ❌ Not sufficient for extreme cold without heat tape
- The pre-slit self-sealing seam slips over pipe and presses shut, so no tape is needed.
- Closed-cell polyethylene foam resists moisture and won’t shed particles like fiberglass.
- Sold in standard 6 ft tubes sized for common 1/2 in, 3/4 in, and 1 in pipe.
- The rigid tube shape won’t conform around tight elbows, tees, or valves without cutting and taping joints.
- Thinner-wall versions offer only modest R-value, so very cold spaces may need the thicker 1 in wall.
Verdict: Best for everyday insulating of straight copper, PEX, or CPVC runs where the no-tape self-seal saves the most time.
#ad · price set by Amazon
Best for Irregular Shapes: M-D Building Products Pipe Wrap
flexible foam wrap tape · self-adhesive · 2 in wide · cuts to length with scissors · conforms to elbows, tees & valves
For valves, fittings, and elbows where tubular foam won’t conform, pipe wrap tape fills in coverage. Wrap it spiral-fashion over irregular shapes for complete protection. Also useful for covering gaps at seams in tubular foam.
- ✅ Conforms to any shape
- ✅ Good for fittings, valves, elbows
- ✅ Use alongside tubular foam for complete coverage
- ❌ More time-consuming than snap-on foam
- The thin flexible foam strip wraps around elbows, tees, and valves that rigid tube insulation can’t cover.
- It is self-adhesive and cuts to any length with ordinary scissors for a custom fit.
- It reduces condensation and sweating on cold pipes to help prevent water damage.
- At a thin profile the foam offers less insulation value than a thick tube, so it’s a supplement more than a primary barrier on long runs.
- Wrapping fittings by hand is more tedious and time-consuming than sliding on pre-slit tubes.
Verdict: Best for sealing the irregular fittings, elbows, and valves that rigid tube insulation leaves exposed.
#ad · price set by Amazon
Best for Extreme Cold: Wrap-On Electric Heat Tape
120V electric pipe heating cable · built-in thermostat (on at 38F) · protects pipes to -50F · low-wattage ~2 W/ft · Press-To-Test button · lengths 3 ft to 100 ft
For pipes in unheated exterior walls, pipes that have frozen before, or climates that regularly see temperatures below 0°F, electric heat tape is the reliable solution. It wraps around the pipe and maintains above-freezing temperatures regardless of ambient temperature. The self-regulating versions are safest — they automatically increase output in colder temperatures and prevent overheating.
- ✅ Works in any temperature
- ✅ Self-regulating — prevents overheating
- ✅ Best for pipes that have frozen before
- ❌ Requires a nearby electrical outlet
- ❌ Ongoing electricity cost
- The built-in thermostat switches the cable on automatically at 38F so it only draws power when needed.
- It actively prevents frozen water pipes down to -50F, far beyond what passive insulation alone can do.
- The low-wattage design uses far less energy than older high-wattage cables.
- It is rated for metal and rigid plastic water-filled pipes only, not fuel lines, drains, hoses, or buried pipe.
- Fiberglass pipe wrap over the cable is recommended to finish the install and isn’t included.
- It must be plugged in, so it won’t protect pipes during a power outage.
Verdict: Best for extreme-cold or freeze-prone runs where passive foam isn’t enough and active heating is required.
#ad · price set by Amazon
Which Pipes to Insulate
Priority locations: pipes in crawl spaces, garage walls, exterior walls, unheated attics, and any pipe within 2 feet of an exterior wall. Both hot and cold pipes should be insulated in unheated spaces — hot pipes because they lose heat, cold pipes because they freeze.
FAQ
How do I know what diameter foam to buy?
Measure the outside diameter of your pipe. Most residential 1/2″ copper pipe has a 5/8″ OD — buy foam labeled for 1/2″ copper. 3/4″ copper has a 7/8″ OD. Pipe insulation is labeled by nominal pipe size, so just match the nominal size.
My pipes still froze after insulating. What went wrong?
Either the foam had gaps at joints and fittings, the temperature dropped below what foam alone can handle, or the pipe is in an exterior wall without any interior heat source nearby. Use heat tape for pipes in exterior walls in cold climates.
When should I insulate my pipes?
Before the first freeze. In most of the US, that means September or October. But honestly — any time of year is fine. The foam doesn’t degrade and takes no more than an afternoon to install.
Bottom Line
Frost King foam insulation covers most pipes in most climates for under $40 total. For exterior walls or very cold climates, add heat tape on the highest-risk sections. A few hours and $30–$60 prevents one of the most expensive and disruptive plumbing failures a home can experience.
Already frozen? Insulation is prevention — if a pipe is frozen now, see how to thaw frozen pipes.
Not sure where a cover or insulation fits in the bigger picture? Follow the full 15-minute outdoor faucet winterization checklist before the first hard freeze.
Fix the 12 Most Common Plumbing Problems Yourself — Free Plumber’s Handbook
Step-by-step fixes for the 12 most common problems — and exactly when to call a pro. Free and instant, from a licensed plumber. Save hundreds on calls you didn’t need.