Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
Quick answer from a licensed plumber: Buy the Delta Trinsic 9159-DST for most sinks: its sheet gives a 15-11/16 inch height, 9-1/2 inch reach and magnetic docking. The Moen Conneaut is the lowest at 15-15/32 inches, the Kohler Crue is the tallest at 17-3/16 inches for big pots, the Pfister Talega installs from above, and the American Standard Southport names two-hole sinks. Measure the space above your sink first.
Our pick for most sinks: the Delta Trinsic 9159-DST pull-down faucet. Check the Delta Trinsic 9159-DST on Amazon
A pull-down faucet puts the sprayer in the spout: you pull the head down into the sink, and a weight on the hose pulls it back. Five things decide whether one works in your kitchen: how tall it is, how the head docks, how far the hose reaches, which holes it needs and what flow it delivers. The rest is finish. This guide compares five pull-down models from Moen, Delta, Kohler, Pfister and American Standard using each maker’s spec sheet and installation instructions. If you have not picked a style yet, read pull-down vs pull-out kitchen faucets first; for a wider look at brands, see our kitchen faucet guide and Moen vs Delta vs Kohler.
Pull-Down Kitchen Faucets Compared
| Faucet | Docking (maker name) | Height above deck, in | Reach, in | Flow, gpm at 60 psi | Max deck thickness, in | Deck plate |
|---|---|---|---|---|---|---|
| Delta Trinsic 9159-DST | MagnaTite | 15-11/16 | 9-1/2 | 1.8 | 3 (2-1/4 with escutcheon) | Optional, sold separately |
| Moen Conneaut 87801SRS | Reflex | 15-15/32 | 7-7/8 | 1.5 | 2-1/2 | Page says included; install sheet says optional |
| Kohler Crue K-22972 | DockNetik | 17-3/16 | 8-9/16 | 1.5 | 2-1/2 | Included |
| Pfister Talega F-529-7TEB | MagnePfit | 15-15/16 | 8-1/4 | 1.8 | 3 | Included (Pfister page) |
| American Standard Southport 7441300 | Re-Trax | 16-1/2 | 8-9/16 | 1.8 | 2 | Sheet says optional; page says included |
Heights and reaches come from each maker’s dimension drawing, and the makers do not all measure from the same points, so use them to compare, not to cut. The five links are single finishes: Chrome for the Delta, Spot Resist Stainless for the Moen, Polished Chrome for the Kohler and Matte Black for the Pfister and American Standard. On September 29, 2026 each linked listing was sold by Amazon.com and showed in stock; the American Standard listing said it ships in 1-2 days. Availability changes, so check the listing.
Delta Trinsic 9159-DST Pull-Down Kitchen Faucet
MagnaTite magnetic docking · 15-11/16 in tall · 9-1/2 in reach · 1.8 gpm at 60 psi · 1 or 3 holes (8 in centers) · 3/8 in compression · 2-function wand · lifetime limited warranty
The Trinsic 9159-DST is Delta’s single-handle pull-down, and its spec sheet answers most of the fit questions in one place. It gives the overall height (15-11/16 inches above the deck), the reach (9-1/2 inches), the hole size for a three-hole sink (1-1/4 to 1-1/2 inches on 8-inch centers), the maximum deck thickness (3 inches, or 2-1/4 inches with the 10-1/2 inch escutcheon) and a minimum of 1-1/2 inches between the faucet and the backsplash. Delta says MagnaTite docking uses an integrated magnet to hold the wand in place. It lists the flow as 1.8 gpm at 60 psi.
The wand has two functions, an aerated stream or a spray. Delta’s product page describes a 20-inch retractable hose and integrated PEX supply lines, and the spec sheet gives 3/8 inch compression fittings. The escutcheon for three-hole sinks, RP64070, is not in the box. Delta’s installation sheet says to flush the supply lines into a bucket before you connect the wand, and to clip the hose to the outlet and pull down to check the connection.
- Delta publishes height, reach, hole size, deck thickness and backsplash clearance on one sheet
- MagnaTite magnetic docking, per Delta
- Overall height of 15-11/16 inches is the second lowest of the five
- Lifetime limited warranty for residential buyers, per Delta
- The 10-1/2 inch escutcheon for three-hole sinks is sold separately (Delta, part RP64070)
- Maximum deck thickness drops to 2-1/4 inches if you use that escutcheon
- Two spray functions, where Kohler and Pfister list three
Verdict: The safest starting point when you have a single-hole or 8-inch three-hole sink and want dimensions you can check against your cabinet before you order.
Moen Conneaut 87801SRS Pulldown Kitchen Faucet
Reflex docking · 15-15/32 in tall · 7-7/8 in reach · 1.5 gpm at 60 psi · 1 or 3 holes · 3/8 in compression · 1255 Duralast cartridge · 68 in braided hose (sheet)
The Conneaut is Moen’s high-arc pulldown in Spot Resist Stainless. Moen’s spec sheet says the Reflex system gives smooth operation, self retraction and secure docking; it does not say the docking is magnetic. Flow is limited to 1.5 gpm at 60 psi, the handle operates with less than 5 pounds of force, and the valve is the 1255 Duralast cartridge. Moen’s product page lists the hose weight (125989), the cartridge and nut kit (160657) and the check valve kit (158550) as replacement parts, so the parts that wear are named.
This faucet has the lowest overall height on the list, 15-15/32 inches above the deck, and the shortest reach, 7-7/8 inches, both from Moen’s dimension drawing. Moen’s sheet also asks for a hole of at least 1-1/2 inches in diameter, which is the top of the 1-1/4 to 1-1/2 inch range on Delta’s three-hole drawing. Moen’s installation sheet asks you to keep an 8 by 8 inch area under the sink clear so the hose and weight can travel, and to set the weight just above the start of the hose loop, on the side of the hose with the locator mark.
- Reflex system with self retraction and docking, per Moen’s sheet
- Lowest overall height of the five, 15-15/32 inches (Moen sheet)
- Named repair parts on the product page: hose weight, cartridge kit, check valve kit
- 1255 Duralast cartridge; lever handle operates with less than 5 pounds of force (Moen)
- Shortest reach of the five, 7-7/8 inches
- Needs a hole at least 1-1/2 inches across, per the spec sheet
- Moen’s product page and spec sheet disagree on height, hose length and whether a deck plate is in the box (see below)
- Flow is capped at 1.5 gpm, which some cooks will notice when filling a stockpot
Verdict: The pick if you plan to keep the faucet a long time and want to know the repair part numbers before you buy.
Kohler Crue K-22972 Pull-Down Kitchen Faucet
DockNetik docking · 17-3/16 in tall · 8-9/16 in reach · 1.5 gpm max at 60 psi (Kohler) · Boost mode · ceramic disc valve · 3-function wand · escutcheon included · 3/8 in compression
Kohler describes the Crue’s high-arch spout as giving vertical clearance for tall cookware and pitchers, and its drawing backs that up: 17-3/16 inches above the deck, the tallest of the five. The three-function wand switches between aerated stream, ring spray and Boost, which Kohler says raises the flow rate by 30 percent. Kohler lists 1.5 gpm as the maximum flow rate at 60 psi; its sheet does not say whether that figure is with Boost on or off. Kohler’s sheet lists the California Energy Commission among the codes it meets. If you mostly fill big pots, a pot filler at the cooktop saves carrying them from the sink.
Kohler lists ceramic disc valves, DockNetik as a secure docking system that locks the sprayhead in place, and an escutcheon plate in the box for three-hole sinks. The installation guide has two details worth knowing. Kohler says not to tighten the faucet shank, because it is designed with slight movement. It also says to set the hose weight above the bottom of the hose loop with a loose cable tie, check that the hose moves smoothly, adjust, and only then tighten the tie.
- Tallest spout of the five, 17-3/16 inches, for filling tall pots (Kohler)
- Three spray functions, including Boost, per Kohler
- Ceramic disc valve and escutcheon plate included, per Kohler
- Kohler’s sheet lists the California Energy Commission among its codes
- Needs the most vertical clearance: 17-3/16 inches above the deck, plus room to work the handle
- Maximum deck thickness is 2-1/2 inches
- Kohler says ADA compliance applies to the faucet handle only
- The hose weight must be tied off and adjusted by hand during install
Verdict: Choose it when you fill tall pots and have open wall or ceiling above the sink. Do not buy it for a sink under a low window.
Not linked: Kohler Crue K-22972 (Polished Chrome) — on 10/3/2026 the Amazon listing was sold by a third-party seller, not by Amazon or the maker. We re-check listings every week.
Pfister Talega F-529-7TEB Pull-Down Kitchen Faucet
MagnePfit magnetic docking · 15-15/16 in tall · 8-1/4 in reach · 1.8 gpm · TopPfit above-sink install · 3-function wand · ceramic disc valve · 36 in supply lines, 3/8 in connection
Pfister’s TopPfit system lets you fix the faucet to the sink from above. You turn the included TopPfit tool to raise the swivel bracket under the sink until it is snug against the deck, so you can install from above the sink in minutes, per Pfister. Its spec sheet lists MagnePfit with Auto-Align docking, an 11.5 inch pull-down hose length, nylon braided hose, a 3-function sprayer (spray, stream and HydroBlade), a Pforever Seal ceramic disc valve and 36 inch integrated PERT supply lines with 3/8 inch connections. Maximum deck thickness is 3 inches, tied with Delta for the most of the five.
The spec sheet lists a 1.8 gpm flow rate and, under code compliance, CEC certified and CALGreen compliant. Pfister’s care guide lists optional 1.0 and 1.5 gpm aerators for buyers who want a lower flow. The installation guide notes that the 3/8 inch female supply connection may need an adapter, which Pfister does not supply. The weight goes on the locator tape on the hose. The spec sheet covers four finishes; the Amazon listing we link is the matte black one, F5297TEB.
- Above-the-sink install with the TopPfit tool included, per Pfister
- 3 inch maximum deck thickness, tied with Delta for the highest of the five
- CEC certified and CALGreen compliant, per the spec sheet
- Three spray functions and an 11.5 inch pull-down hose length, per Pfister
- Pfister’s guide says an adapter may be needed for the 3/8 inch connection and is not supplied
- Default flow is 1.8 gpm; the 1.5 gpm aerator is an optional part
- Supply lines are fixed at 36 inches and end in 3/8 inch female connections (Pfister)
Verdict: The pick when the space under the sink is tight, or you are replacing the faucet without help, and you would rather work from above.
American Standard Southport 7441300 Pull-Down Kitchen Faucet
Re-Trax docking · 16-1/2 in tall · 8-9/16 in reach · 1.8 gpm · 28 mm ceramic disc valve · 35 in supply hoses, 3/8 in compression · 2 in max deck thickness
American Standard’s Southport is the one pull-down here with a listing that names two-hole sinks. Its product page says the deck plate is for use on single-hole, 2-hole or 3-hole sinks and countertops. The spec sheet lists a washerless 28 mm ceramic disc valve cartridge, a nylon braided pull-out hose with two integral check valves, 35 inch braided nylon supply hoses with 3/8 inch compression connections and a 1.8 gpm maximum flow rate. Height is 16-1/2 inches above the deck and reach is 8-9/16 inches, per the drawing. The same matte black Southport is on our black kitchen faucet page, with American Standard’s finish care rule.
Two things need checking before you buy. The spec sheet says the faucet can be mounted with or without an optional deck plate, while the product page and Amazon listing say a deck plate is included. And the maximum deck thickness is 2 inches, the thinnest of the five, so a thick stone top with a plywood layer under it may not clamp. The owner’s manual is shared with several models and says to set the weight 24 inches down from the underside of the sink deck.
- Product page names single-hole, 2-hole and 3-hole use with the deck plate
- 28 mm ceramic disc valve cartridge and two integral check valves, per the spec sheet
- 3/8 inch compression supply hoses; Speed Connect spray hose, per American Standard
- ADA compliant, per the spec sheet
- Maximum deck thickness is 2 inches, the lowest of the five
- The spec sheet calls the deck plate optional; the product page says it is included
- The installation manual is shared with other models, so read the model numbers on the page
- The sheet lists no California Energy Commission certification
Verdict: Worth a look for a sink with two holes or a thin deck you can measure, once you have confirmed what comes in the box.
I send an occasional note when a new guide goes up — repairs worth doing yourself, and the parts that actually last. No spam, no course funnel; written by a licensed Georgia plumber.
Where the Makers’ Pages and Sheets Disagree
We compared each product page with its spec sheet or installation sheet. Four of the five have a mismatch or a caveat. Treat the spec sheet as the number to plan around, and check the box contents on the listing.
- Moen Conneaut height: the spec sheet drawing gives 15-15/32 inches overall; the product page lists a spout height of 15.88 inches.
- Moen Conneaut hose: the spec sheet says a 68 inch braided hose; the product page lists a 69 inch hose length.
- Moen Conneaut deck plate: the product page lists a deck plate as included; the installation sheet marks the deck plate and gasket as options and not included with all models.
- American Standard Southport deck plate: the spec sheet says the faucet can be mounted with or without an optional deck plate; the product page says a deck plate is included.
- Kohler Crue spray modes: the spec sheet lists aerated stream, ring spray and Boost; the Amazon listing we link describes stream, sweep spray and Boost. Both list three functions with Boost.
- Delta Trinsic flow: the spec sheet says 1.8 gpm at 60 psi. Delta’s installation sheet is shared across a family of faucets and also lists a 1.5 gpm maximum aerator for some models, so go by the sheet for your model number.
Before You Buy
- Measure the height above the sink. Measure from the deck to the window sill, shelf or upper cabinet, and compare it with the overall height in the table. Delta also wants at least 1-1/2 inches between the faucet and the backsplash. The tallest, the Kohler at 17-3/16 inches, is for open space; the Moen at 15-15/32 inches is the lowest here. A pull-down needs room for the handle to swing and your hand to work the wand (a plumber’s note, not from a maker document).
- Understand docking. Delta and Pfister say their docking is magnetic, and Kohler lists the Crue among its kitchen faucets with magnetic docking (the Crue spec sheet itself says only that DockNetik “locks the sprayhead into place”). Moen calls Reflex a system for smooth operation, self retraction and secure docking, and American Standard says Re-Trax gives smooth extension, retraction and docking. Whichever you buy, the weight has to slide freely. Moen wants an 8 by 8 inch clear area under the sink, and American Standard’s manual puts the weight 24 inches below the deck. If a disposal, trap or bottle blocks the hose, the head will not dock. Our kitchen faucet sprayer guide covers replacing a head or hose that has failed.
- Check hose reach. Makers quote different things. Pfister gives an 11.5 inch pull-down hose length, and Delta’s product page describes a 20-inch retractable hose. Moen’s sheet gives a 68 inch braided hose, which is the whole hose, not how far it pulls out. Ask what your sink needs: from the spout to the far corner of the bowl is a measurement you can take with a tape (a plumber’s note).
- Match the holes and the deck. Count your holes and their spread first; see kitchen faucet hole size. Hole diameter also differs: Moen’s sheet asks for at least 1-1/2 inches, Pfister and American Standard give 1-3/8 to 1-1/2 inches, and Delta’s drawing shows 1-1/4 to 1-1/2 inches for each of three holes. Maximum deck thickness runs from 2 inches (American Standard) to 3 inches (Delta without the escutcheon, and Pfister). Measure the stone, substrate and plate together.
- Look at the supply connections. All five list 3/8 inch compression connections. Pfister’s lines are 36 inches long and American Standard’s are 35 inches. Pfister says an adapter may be needed and is not supplied. If the old lines are stiff and bent, replace them; see braided faucet supply lines.
- Read the valve and flow claims. Kohler, Pfister and American Standard say ceramic disc; Moen lists a 1255 Duralast cartridge; Delta lists a DIAMOND Seal valve. All five list an accessibility standard on their sheets (ADA or ICC/ANSI A117.1). Moen, Kohler and Pfister limit it to the handle, Delta to the valve control, and American Standard’s sheet shows an ADA mark without a limit. The flow rules are in the next section.
Flow Rate: 1.5 vs 1.8 gpm, and State Rules
The federal limit for a kitchen faucet is 2.2 gpm at 60 psi (10 CFR 430.32(o)). California’s Title 20 sets 1.8 gpm at 60 psi for kitchen faucets sold in the state, with an optional temporary flow of 2.2 gpm. Colorado’s HB19-1231 sets the same 1.8 gpm, with the same optional 2.2 gpm, for residential kitchen faucets sold there from January 1, 2021, as the bill was signed, and requires the faucet to default back to 1.8 gpm after each use. So a 1.8 gpm faucet sits at the California and Colorado limit and a 1.5 gpm faucet sits under it. The Moen sheet says it meets CalGreen, the Kohler sheet lists the California Energy Commission, and Pfister’s lists CEC certified and CALGreen compliant. Delta’s product page shows a “Water-Efficient” CALGreen badge but its spec sheet lists no CEC certification, and American Standard’s sheet lists neither. None of the five sheets mention Colorado (our reading). Laws change, so check yours before you order.
Install Notes for a Pull-Down
The steps are the same for all five: shut off the water, remove the old faucet, seat the gasket, feed the hose and lines through the hole, tighten from underneath (or with the TopPfit tool), connect the supply lines and hose, and set the weight. Two cautions come from the makers. Kohler and Delta say to flush the lines before connecting the wand; Delta says to run the hot and cold into a bucket and slowly open and close the stops, and Kohler says one minute of hot and cold. Kohler also says not to remove internal components, since the faucet has back-siphonage protection. Then check every joint with the water running and the wand pulled out and returned. Our how to install a faucet guide covers the general job. If a hose fails later, see Delta kitchen faucet hose replacement or Moen hose replacement by connection.
FAQ
What is the best pull-down kitchen faucet?
It depends on what sits above your sink. For most sinks we would start with the Delta Trinsic 9159-DST because Delta’s sheet gives the height, reach, deck thickness and hole sizes. Pick the Kohler Crue only if you have open space above the sink, since it stands 17-3/16 inches above the deck. Pick the Moen Conneaut if you want the lowest height and named repair parts, or the Pfister Talega if you want to install from above the sink.
Does magnetic docking stop the spray head from drooping?
Delta says MagnaTite docking uses a magnet to hold the wand in place so it stays docked, and Pfister says MagnePfit uses magnetic docking to keep the head secured. Kohler lists the Crue among its kitchen faucets with magnetic docking, though the Crue spec sheet calls DockNetik a secure docking system that locks the sprayhead in place. Moen and American Standard describe Reflex and Re-Trax as secure docking or retraction and do not say magnet on the sheets we read. All of them depend on the hose weight sliding freely. Moen asks for an 8 by 8 inch clear area under the sink for the hose and weight.
Will a pull-down faucet fit under my window or cabinet?
Measure from the deck straight up to the sill or cabinet, then compare it with the overall heights on the makers’ drawings: 15-15/32 inches for the Moen, 15-11/16 for the Delta, 15-15/16 for the Pfister, 16-1/2 for the American Standard and 17-3/16 for the Kohler. Allow extra for the handle and for your hand under the spout (a plumber’s note, not from a maker document).
Can I put a single-hole pull-down faucet on a three-hole sink?
Yes, with a deck plate that covers the two outer holes. Kohler and Pfister list a plate in the box, Delta sells its 10-1/2 inch escutcheon, RP64070, separately, and Moen’s product page and installation sheet disagree on whether one is included. American Standard’s spec sheet and product page disagree too. Check the box contents on the listing, and see our kitchen faucet hole size guide for measuring the spread.
What flow rate can a kitchen faucet have?
The federal limit for a kitchen faucet is 2.2 gpm at 60 psi. California’s Title 20 and Colorado’s HB19-1231 both set 1.8 gpm at 60 psi, with an optional temporary flow of 2.2 gpm; Colorado’s text requires the faucet to return to 1.8 gpm after each use. Of the five, the Moen and Kohler are listed at 1.5 gpm, and the Delta, Pfister and American Standard at 1.8 gpm. If you live in California or Colorado, confirm the listing meets your state’s rule before you order.
Why Trust Plumbing Picks
Plumbing Picks is written by a licensed Georgia journeyman plumber. Every size, rating, dimension and spec on this page comes from the manufacturer pages and documents listed below, which we opened and read, or from the Amazon listing we link; nothing here comes from hands-on testing. Each linked product was shipped or sold by Amazon, new and in stock, when we checked on September 29, 2026. Where a link goes to Amazon we may earn a commission at no extra cost to you. Nobody pays to be included here. More on who writes this and how we pick.
Sources
- Delta: Trinsic 9159-DST technical specifications (DSP-K-9159-DST)
- Delta: 106557 Rev H maintenance and installation sheet
- Delta: Trinsic 9159-DST product page
- Moen: Conneaut 87801 series specifications
- Moen: INS10205E one-handle pulldown kitchen faucet installation sheet
- Moen: Conneaut 87801SRS product page
- Kohler: Crue K-22972 specification sheet
- Kohler: 1212671-2 installation guide (Crue K-22972)
- Kohler: Kitchen Faucets With Magnetic Docking (lists the Crue 22972)
- Kohler: Simplice K-647 specification sheet (DockNetik magnetic docking system)
- Pfister: Talega F-529-7TE specification sheet
- Pfister: 55571 Talega installation guide
- Pfister: 55572 Talega maintenance and care guide
- Pfister: Talega F-529-7TE product page
- American Standard: Southport 7441300 spec sheet
- American Standard: M985147 pulldown kitchen faucet owner’s manual (covers 7441300)
- American Standard: Southport 7441300 product page
- eCFR: 10 CFR 430.32(o) federal faucet flow limits
- California Code of Regulations Title 20, section 1605.3 (kitchen faucets, Table H-4)
- Colorado HB19-1231 as signed (section 6-7.5-105, faucets)
- Amazon listings for the Delta Trinsic 9159-DST, Moen Conneaut 87801SRS, Kohler Crue K-22972-CP, Pfister Talega F5297TEB and American Standard Southport 7441300.243 (linked above)
Bottom Line
Measure the height above the sink and count your holes before anything else. The Delta Trinsic 9159-DST is the pull-down to start with, the Moen Conneaut is the lowest, the Kohler Crue is for tall pots and open space, the Pfister Talega is for installing from above, and the American Standard Southport is worth checking for a two-hole sink. Keep the hose weight clear, flush the lines, and check the flow rule for your state.