Best Commercial-Style Kitchen Faucets

A pro-style spring spout changes the fit before it changes the look: the height under your cabinets, the swing of the handle, and the deck it can clamp. Start with those three, then pick the spray you want.

As an Amazon Associate I earn from qualifying purchases. How this site earns

Amazon product photo of the Kraus Bolden commercial-style pull-down kitchen faucet, model KPF-1610SSMB, in Stainless Steel/Matte Black: an open-coil spring spout with a side docking arm.
Product photo: Amazon

The short answer

For most kitchens, get the Kraus Bolden KPF-1610. Kraus sizes it at 18¾ in. tall and says it fits under standard cabinets. Its handle swings forward for a tight backsplash, it takes a deck up to 3⅜ in. on the spec sheet, and it flows 1.8 gpm (Kraus sheet). Switch only when your sink space or your spray needs say so.

Low cabinet or window above
Moen Nolia. At 17 5/16 in. installed, it is the lowest spring spout here (Moen).
Wall tight behind the faucet
Kraus Bolden or Kohler Purist. Both handles rotate 90 degrees forward, off the backsplash (Kraus, Kohler).
Double-bowl sink
Delta Antoni. The spout rotates a full 360 degrees, with a 9⅝ in. reach (Delta sheet).
Strongest spray, extra holes
Kohler Semi-Professional, with Sweep spray and Boost, and a fit for 1 to 4 holes (Kohler sheet).
Every other style
For standard pull-downs and the rest, see the kitchen faucet guide.
Not sure? Answer three questions

What a commercial-style faucet changes

The look of a restaurant pre-rinse unit, built for a home sink: a tall spring or coil spout and a pull-down wand on a docking arm.

The style changes three things a plumber checks before anything else. It changes the height you need under cabinets and windows, the spray you get, and the deck thickness and holes it fits. This guide compares five spring-style faucets from Kraus, Delta, Kohler and Moen on those three points.

For standard pull-down faucets, see the pull-down kitchen faucet picks. For every style, see the kitchen faucet picks. For a separate sprayer attachment, see the sprayer guide, and for a faucet that comes out of the wall over a farmhouse or utility sink, see the wall-mount kitchen faucet picks.

Find your faucet

Start with the space around your sink. The faucet comes last.

Have a tape measure handy? The fit checker tests your numbers against all five.

1What’s tightest around your sink?
2What do you do most at the sink?
3How many holes are in the sink or counter?

Start with question 1: what’s tightest around your sink.

Picks by need

Five commercial-style faucets from Kraus, Delta, Kohler and Moen. Each one solves a different sink problem. Every size comes from the maker’s own sheet for that exact model.

  1. Amazon product photo of the Kraus Bolden commercial-style pull-down kitchen faucet, model KPF-1610SSMB, in Stainless Steel/Matte Black: an open-coil spring spout with a side docking arm.

    Product photo: Amazon

    For most kitchens, and a tight backsplash

    Kraus Bolden

    KPF-1610SSMB · Stainless Steel/Matte Black

    Best for
    One faucet that suits most pro-style kitchens. Kraus sizes it at 18¾ in. tall and says it fits under standard cabinets. The handle rotates 90 degrees forward for a tight backsplash, it takes the thickest deck here, and it flows 1.8 gpm (Kraus sheet).
    Skip it if
    Your deck is thicker than 1½ in. and you want certainty first: Kraus’s spec sheet allows 3⅜ in., its web Q&A says 1½ in. (Kraus sheet, Kraus page). Skip it too on a 3-hole sink unless you add the DP02 plate, sold separately.

    Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

    Full specs and the tradeoff
  2. Amazon product photo of the Delta Antoni pull-down spring kitchen faucet, model 18803-SP-DST, in SpotShield Stainless: a coiled spring spout with a docking wand.

    Product photo: Amazon

    For a double-bowl sink

    Delta Antoni

    18803-SP-DST · SpotShield Stainless

    Best for
    A double bowl, covered from one mount. The spout rotates a full 360 degrees, the only full swing among these five, with a 9⅝ in. reach. It runs 1.8 gpm and docks with Delta’s MagnaTite magnet (Delta sheet).
    Skip it if
    You have less than 2½ in. from the faucet hole’s center to the backsplash. Delta asks for at least that much (Delta sheet). Skip it too under a low cabinet: it stands 19¾ in. tall, or 20¼ in. on its escutcheon.

    Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

    Full specs and the tradeoff
  3. No product photo for this finish on the live guide

    Specs: Kohler’s sheet, linked below

    For the strongest spray, and 1 to 4 holes

    Kohler Semi-Professional

    K-R22745-SD-VS · Vibrant Stainless

    Best for
    The strongest spray options here, and the only pick that covers an older sink with extra holes. The three-function sprayhead switches between stream, Sweep spray and Boost, and the box includes an escutcheon plate and a soap dispenser for sinks with 1, 2, 3 or 4 holes (Kohler sheet).
    Skip it if
    A shelf or cabinet hangs low over the sink. It stands 21⅝ in. tall, the second tallest here (Kohler sheet). Skip it too if you want more than 1.5 gpm before a boost button.

    Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

    Full specs and the tradeoff
  4. Amazon product photo of the Kohler Purist semi-professional kitchen faucet, model K-24982-BL, in Matte Black: a coated hose with a removable coil on a tall single-post body.

    Product photo: Amazon

    For the longest reach, in an open kitchen

    Kohler Purist

    K-24982-BL · Matte Black

    Best for
    An open kitchen with nothing above the sink, where reach matters most. It reaches 10 in., the longest here, and the wand outlet sits 8⅜ in. above the deck, the most room for big stockpots and sheet pans under the wand of the five (Kohler sheet).
    Skip it if
    Anything hangs above your sink. At 23 13/16 in. it is the tallest faucet here, and many wall cabinets will not clear it. Skip it too for a multi-hole sink: it mounts through a single hole only (Kohler sheet).

    Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

    Full specs and the tradeoff
  5. Amazon product photo of the Moen Nolia pre-rinse spring pull-down kitchen faucet, model 87886BL, in Matte Black: a low coiled spring spout with a side lever.

    Product photo: Amazon

    For a low cabinet or window above the sink

    Moen Nolia

    87886BL · Matte Black

    Best for
    A low wall cabinet or window over the sink. At 17 5/16 in. installed height on Moen’s drawing, it is the lowest spring faucet here, and it still carries Power Boost and a 68 in. braided hose (Moen sheet).
    Skip it if
    You want the longest reach or the highest flow. Its reach is 8½ in., the shortest of the five, and its flow is 1.5 gpm before Power Boost (Moen sheet). Skip it too if the handle has to mount on the left: Moen designs it for the right side only.

    Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

    Full specs and the tradeoff

Shopping by brand or style instead? See the kitchen faucet guide for every style, the pull-down guide, or the wall-mount guide.

The differences that change the choice

Height decides what fits under a cabinet or window. Reach decides where the water lands. Room behind decides whether the handle can swing. All from the makers’ drawings.

How the five commercial-style kitchen faucets differ in size and fit
PickHeightUnder the spoutReachRoom behindHoles
Kraus Bolden18¾ in.6¼ in.spout height8⅝ in.None needed1; plate sold separately
Delta Antoni19¾ in.20¼ on the plate7 13/16 in.wand outlet9⅝ in.At least 2½ in.1 or 3, plate in box
Kohler Semi-Professional21⅝ in.7⅝ in.wand outlet9 in.Not listed1 to 4, plate in box
Kohler Purist23 13/16 in.tallest8⅜ in.wand outlet, most room10 in.None needed1 only
Moen Nolia17 5/16 in.shortestNot listed by Moen8½ in.Not listed1 or 3, plate in box

Flow and spray, in one line: the Kraus and the Delta run 1.8 gpm; the Kohlers and the Moen run 1.5 gpm, with Boost on the Kohlers and Power Boost on the Moen (Kraus sheet, Delta sheet, Kohler sheets, Moen sheet). All five connect with 3/8 in. compression fittings, per each maker.

Models checked but not picked

Delta Rhett 18829 and Ermelo 18887: Delta’s spec sheets show both at about 21 in. tall (20⅞ and 21⅛ in.) with a 9⅝ in. reach, 1.8 gpm and a two-function wand, close to the Antoni picked here; the Amazon-sold listings found in the September 30, 2026 check were Champagne Bronze or low on stock. Kohler Crue 22973, the spring-spout sibling of the semi-professional pick: the finishes found were sold by third-party sellers. Moen Align 5923: the Amazon-sold listing showed a shipping delay; Moen also makes a touchless version, the 5923EW. Unbranded commercial-style faucets: many search results came from brands with no spec sheet or installation manual to check.

How to choose a commercial-style kitchen faucet

Six checks, in the order a plumber runs them.

Height under cabinets and windows

Height is where these faucets go wrong. The five here run from 17 5/16 in. (Moen Nolia) to 23 13/16 in. (Kohler Purist) on the makers’ documents. Kraus says its 18¾ in. Bolden fits under standard kitchen cabinets. Plumber’s note: measure from the counter to the lowest thing above the sink. That can be a wall cabinet, a shelf, a pot rack, or the bottom of a window sash when it is raised. Leave room to lift the wand off its dock without hitting it.

Reach and sink size

Reach runs from 8½ in. on the Moen to 10 in. on the Kohler Purist. The Delta is 9⅝ in., the Kohler semi-professional 9 in. and the Kraus 8⅝ in. Plumber’s note: on a large single-bowl or farmhouse sink, more reach puts the stream nearer the middle of the bowl. On a double bowl, check that the spout swings far enough to cover both. The Delta turns 360 degrees and the Kraus 180. Moen and Kohler do not list a swing angle for these models.

Spray and flow

The Kohler and Moen faucets are limited to 1.5 gpm at 60 psi, and the Kraus and Delta to 1.8 gpm. Kohler’s Boost raises the flow rate by 30%, and its Sweep spray is, in Kohler’s words, a wide, forceful blade of water. Moen lists Power Boost and four settings on the Nolia. Kraus and Delta list two functions, aerated stream and spray. At full rated flow, filling 3 gallons takes about 2 minutes at 1.5 gpm and about 1 minute 40 seconds at 1.8 gpm. Moen’s Nolia sheet says it meets Georgia SB370 requirements.

Handle clearance at the backsplash

Kohler says the Purist’s handle rotates 90 degrees forward to prevent contact with the backsplash. Kraus says the Bolden’s handle rotates 90 degrees forward for tight spaces with no backsplash clearance. Plumber’s note: with a sink set close to a tiled backsplash, a handle that swings back will hit the tile before the water is fully hot. A forward-swinging handle avoids that.

Holes and deck thickness

The Kraus takes up to 3⅜ in. of deck through a hole of at least 1⅜ in., and a 3-hole sink needs its optional DP02 deck plate. The Kohler semi-professional installs on 1 to 4 holes with its escutcheon and soap dispenser. Kohler says its longer shank works with counters up to 2½ in. thick. The Purist is single hole, and Kohler lists a 1327990 extension kit with a 2½ to 4⅝ in. range. The Delta fits 1 or 3 holes, 1 5/16 to 1½ in., up to 2½ in., with its escutcheon in the box. The Moen fits 1 or 3 holes, 1½ in. minimum, up to 2½ in. Plumber’s note: a tall spring faucet puts more leverage on the mounting nut than a short one. Tighten the mount fully, so the base does not rock when you pull the wand. See how to tighten a loose faucet base.

Supply connections

All five connect with 3/8 in. compression fittings. Kraus’s waterlines are 26.5 in. long, Delta uses 3/8 in. O.D. PEX supply lines, and Moen’s hose is 68 in. Plumber’s note: replace angle stops that will not close before you hook up a new faucet. See the under-sink shut-off valve picks and the braided supply line picks.

Each pick, up close

The tradeoff, the install numbers, the parts and what each maker says about standards. Where two of a maker’s own documents disagree, both numbers are here.

For most kitchens, and a tight backsplash

Kraus Bolden commercial-style pull-down kitchen faucet, KPF-1610SSMB, Stainless Steel/Matte Black

The tradeoff. The Bolden is the open-coil faucet with the fewest fit problems here. Kraus lists 1.8 gpm, tied with the Delta for the most flow, and a two-function sprayhead with aerated stream and spray. The spout swivels 180 degrees, and the reach is 8⅝ in. (Kraus sheet).

What the maker lists. Kraus lists a 35 mm ceramic cartridge, 26.5 in. integrated nylon waterlines with 3/8 in. compression connections, a quick-connect sprayer hose and a quick weight (Kraus sheet). The warranty covers structure and finish for as long as the original buyer lives in the home, the sprayhead assembly and hoses for one year, and the cartridge for five years; commercial purchasers get one year (Kraus warranty).

The Kraus spec sheet also warns that a pull-down faucet should never be connected to a portable dishwasher, because pressure swings can rupture the hose (Kraus sheet).

From: Kraus spec sheet, Kraus installation manual, Kraus product page, Kraus warranty. Maker documents gathered November 15, 2026; figures rechecked November 18, 2026.

Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

Height
18¾ in.
Spout height
6¼ in.
Reach
8⅝ in.
Holes
1; 3 with the DP02 plate, sold separately
Hole size
1⅜ to 1½ in.
Max deck
3⅜ in. (spec sheet and manual); 1½ in. (Kraus web Q&A)
Room behind
None needed, per Kraus
Flow
1.8 gpm at 60 psi
Spray
Aerated stream or spray, two-function
Swivel
180 degrees
Hookup
26.5 in. nylon lines, 3/8 in. compression
Cartridge
35 mm ceramic
Warranty
Lifetime limited on structure and finish in a home; sprayhead and hoses 1 year; cartridge 5 years

For a double-bowl sink

Delta Antoni pull-down spring kitchen faucet, 18803-SP-DST, SpotShield Stainless

The tradeoff. Delta’s Antoni sits in the middle of this group for height. Delta’s drawing shows 19¾ in. from the deck to the top of the spring, or 20¼ in. when it sits on the escutcheon, and a 9⅝ in. reach. The wand outlet is 7 13/16 in. above the deck. Delta lists a two-function wand with aerated stream or spray, MagnaTite docking and Touch-Clean spray holes (Delta sheet).

What the maker lists. It mounts through one hole of 1 5/16 to 1½ in., or a 3-hole sink on 8 in. centers with the escutcheon, which Delta lists as optional and included. The maximum deck is 2½ in. The supply lines are 3/8 in. O.D. PEX with 3/8 in. compression fittings, and the cartridge is Diamond coated ceramic (Delta sheet).

Delta’s sheet gives a lifetime limited warranty on parts and finish, 10 years for multifamily residential use and 5 years for other commercial use. A note on the source: deltafaucet.com would not serve its pages to my reader, so these figures come from Delta’s spec sheet DSP-K-18803-DST Rev. A, as posted by The Home Depot.

From: Delta spec sheet DSP-K-18803-DST Rev. A (hosted copy). Maker documents gathered November 15, 2026; figures rechecked November 18, 2026.

Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

Height
19¾ in.; 20¼ in. with the escutcheon
Wand outlet
7 13/16 in. above the deck
Reach
9⅝ in.
Holes
1, or 3 on 8 in. centers with the escutcheon
Hole size
1 5/16 to 1½ in.
Max deck
2½ in.
Room behind
At least 2½ in. from the hole’s center
Flow
1.8 gpm at 60 psi
Spray
Aerated stream or spray, two-function wand
Swivel
360 degrees
Docking
MagnaTite magnet
Hookup
3/8 in. O.D. PEX lines, 3/8 in. compression
Cartridge
Diamond coated ceramic
Warranty
Lifetime limited, parts and finish, in a home

For the strongest spray, and 1 to 4 holes

Kohler semi-professional kitchen faucet with soap dispenser, K-R22745-SD-VS, Vibrant Stainless

The tradeoff. Kohler’s semi-professional faucet uses a coated hose with a removable coil instead of a bare spring, which Kohler says is easier to clean. Kohler describes Sweep as a wide, forceful blade of water, and says Boost raises the flow rate by 30%. The base flow is 1.5 gpm at 60 psi (Kohler sheet).

What the maker lists. On Kohler’s drawing it is 21⅝ in. tall with a 9 in. reach, and the wand outlet sits 7⅝ in. above the deck. Kohler says the longer shank works with counters up to 2½ in. thick. The sprayhead locks in place with DockNetik, and the valves are ceramic disc (Kohler sheet).

The finish is Vibrant Stainless, and the name matters: Kohler’s faucet warranty covers finishes for as long as the original consumer purchaser owns the home, and a footnote moves non-Vibrant finishes to one year. The same warranty says abrasive cleansers, ammonia, bleach, acids, waxes, alcohol or solvents not recommended for Kohler finishes void it.

From: Kohler spec sheet for K-R22745-SD, dated June 13, 2024, and the KOHLER Faucet Lifetime Limited Warranty. Maker documents gathered November 15, 2026; figures rechecked November 18, 2026.

Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

Height
21⅝ in.
Wand outlet
7⅝ in. above the deck
Reach
9 in.
Holes
1, 2, 3 or 4; escutcheon and soap dispenser in the box
Hole size
1 5/16 in. on Kohler’s drawing
Max deck
2½ in.
Room behind
Not listed by Kohler
Flow
1.5 gpm at 60 psi; Boost adds 30%
Spray
Stream, Sweep spray, Boost
Docking
DockNetik, locks the sprayhead in place
Hookup
Supply lines with 3/8 in. compression
Valve
Ceramic disc
Warranty
KOHLER Faucet Lifetime Limited Warranty

For the longest reach, in an open kitchen

Kohler Purist semi-professional kitchen faucet, K-24982-BL, Matte Black

The tradeoff. The Purist is the tallest and longest-reaching faucet here: 23 13/16 in. from the deck to the top of the coil and a 10 in. reach on Kohler’s drawing. It also needs the most clearance above. Kohler lists the same Sweep spray, Boost and aerated stream as its semi-professional sibling, DockNetik magnetic docking, and temperature memory. The handle rotates 90 degrees forward to keep it off the backsplash (Kohler sheet).

What the maker lists. The Purist mounts through a single hole, 1 5/16 in. on the drawing, with a 2½ in. maximum deck. Kohler lists a 1327990 rough-in and extension kit with a range of 2½ to 4⅝ in.; ask Kohler which deck it suits. Flow is 1.5 gpm at 60 psi before Boost (Kohler sheet).

One warranty caution: the finish here is Matte Black, not a Vibrant finish. Kohler’s current warranty moves non-Vibrant finishes to a one-year warranty in one footnote, and another says organic, non-Vibrant, non-chrome finishes are warranted only if made after January 1, 2019. If finish coverage matters to you, ask Kohler at 1-800-456-4537 before you buy.

From: Kohler spec sheet for K-24982 and the KOHLER Faucet Lifetime Limited Warranty. Maker documents gathered November 15, 2026; figures rechecked November 18, 2026.

Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

Height
23 13/16 in.
Wand outlet
8⅜ in. above the deck
Reach
10 in.
Holes
1 only
Hole size
1 5/16 in. on Kohler’s drawing
Max deck
2½ in.; 1327990 extension kit range to 4⅝ in.
Room behind
None needed; handle rotates 90 degrees forward
Flow
1.5 gpm at 60 psi; Boost adds 30%
Spray
Stream, Sweep spray, Boost
Docking
DockNetik magnetic
Hookup
Flexible supply lines, 3/8 in. compression
Valve
Ceramic disc
Warranty
KOHLER Faucet Lifetime Limited Warranty; see the finish footnote above

For a low cabinet or window above the sink

Moen Nolia pre-rinse spring pull-down kitchen faucet, 87886BL, Matte Black

The tradeoff. Moen lists 1.5 gpm at 60 psi, Power Boost spray, a 68 in. braided hose and Moen’s 1255 Duralast cartridge for single-handle faucets. Moen’s product page lists four spray settings: aerated stream, boosted rinse, boosted stream and a powerful cleaning rinse (Moen sheet, Moen page).

What the maker lists. The sheet says it installs through 1 or 3 holes, 1½ in. minimum, with a 2½ in. maximum deck. Moen’s product page lists the deck plate as included, and the drawing shows a soap dispenser (Moen sheet, Moen page). Moen’s sheet says it meets Georgia SB370 requirements.

Moen’s instructions say to flush by taking the wand off, holding the hose, turning the faucet on and moving the handle toward you and away from you for 15 seconds (Moen instructions). The warranty on the sheet is lifetime limited against leaks, drips and finish defects to the original homeowner, 10 years multifamily and 5 years commercial.

From: Moen spec sheet, Moen installation instructions, Moen product page. Maker documents gathered November 15, 2026; figures rechecked November 18, 2026.

Comparison only: no exact Amazon offer is qualified for a buy button here. No price is shown for this pick.

Height
17 5/16 in. installed
Wand outlet
Not listed by Moen
Reach
8½ in.
Holes
1 or 3; deck plate included, per Moen’s product page
Hole size
1½ in. minimum
Max deck
2½ in.
Room behind
Not listed by Moen
Flow
1.5 gpm at 60 psi, with Power Boost
Spray
Four settings, per Moen’s product page
Hose
68 in. braided
Hookup
Flexible lines, 3/8 in. compression
Cartridge
1255 Duralast
Warranty
Lifetime limited against leaks, drips and finish defects, original homeowner

Plumber’s fit check

Six checks before you order. Three under the sink, three on the counter. A flashlight and a tape measure will do.

Illustration of an open kitchen sink cabinet: a faucet shank and mounting nut under the counter, two braided supply lines down to hot and cold shutoff valves on the back wall, a pull-down hose hanging in a loop with a weight on it, and a white drain trap to the left. A room scene, not a product photo.
1 is the faucet’s mounting nut under the deck. 2 is a shutoff valve. 3 is the hose weight and the space it swings in.Disclaimer: Illustration for visual purposes

Under the sink

  1. Deck thickness at the hole

    Measure the sink or counter where the faucet goes, from the top to the underside. Four of these five allow 2½ in. at most. Kraus lists 3⅜ in. on its spec sheet and manual but 1½ in. in its web Q&A (Kraus sheet, Kraus manual, Kraus page), and Kohler lists an extension kit for the Purist with a range to 4⅝ in.

  2. Shutoff valves

    All five end in 3/8 in. compression connections, per each maker. Look at the outlet on your valves. If it is a different size, or a valve will not close all the way, fix that before the new faucet goes in.

  3. Room for the hose and weight

    A pull-down hose hangs in a loop with a weight on it, so the spray head pulls back into place. Keep that space clear of a disposal, a filter or a trash pull-out. Moen’s hose is 68 in. long (Moen); Kraus lists its weight as a quick weight on the sheet (Kraus).

On the counter

  1. Count the holes

    Count every hole, including one with a sprayer, soap pump or cap in it. The Kohler semi-professional covers 1 to 4. The Kraus needs its DP02 plate for a 3-hole sink, sold separately, and the Purist is single-hole only. For holes in odd places, read the hole-size guide first.

  2. Handle clearance at the backsplash

    Measure from the center of the faucet hole to the backsplash or window ledge. Under 2½ in., skip the Delta (Delta sheet). The Kraus and the Purist swing forward and need none.

  3. Height above the sink

    Measure from the counter to the lowest thing above it: a cabinet, a shelf or a window sash that opens inward. These five run from 17 5/16 in. to 23 13/16 in., so the measurement decides the shortlist. For shorter faucets of every style, see the low-profile guide.

Doing it yourself? Shut both valves and open the old faucet to drain it first. The faucet install guide has the steps.

Watch a faucet swap, start to finish

The Home Depot replaces a single-handle kitchen faucet in about 12 minutes: water off, supply lines off, the old faucet out, the new one anchored, the lines connected and flushed.

Picked because it ranked among the most-viewed results for “kitchen faucet” on YouTube when checked on October 30, 2026, and it covers the job this page is about.

Video: “How to Replace a Kitchen Faucet With a Single Handle,” The Home Depot on YouTube (2019). Not made by PlumbingPicks, and it does not show these five picks. The player loads from YouTube only after you press the button. Watch it on YouTube

Installing a commercial-style faucet

The swap is a normal faucet job, with three notes from the makers’ own instructions.

Mount it solid

The faucet body goes through the sink hole and locks from below. Kraus’s manual lists an adjustable wrench, a Phillips screwdriver, silicone sealant and pipe tape as the tools. Kohler lists an adjustable wrench and a Phillips screwdriver for its semi-professional faucet. Moen says its faucet installs with the handle on the right side only, so set the body before you tighten it. See how to install a faucet for the basic swap.

Flush the lines

Moen’s instructions have you take the wand off, hold the hose, turn the faucet on and move the handle toward you and away from you for 15 seconds. Then put the wand back on. Plumber’s note: whatever the faucet, flush with the spray head off the first time. Old stops shed grit, and the spray head screen is the first thing it clogs.

Keep the finish and sprayface clean

Kraus says to rinse with clean water and dry with a soft cloth, and not to clean with soaps, acid, polish, abrasives or harsh cleaners. Kohler says its MasterClean sprayface withstands mineral buildup, and its warranty lists abrasive cleansers, ammonia, bleach, acids, waxes, alcohol and solvents not recommended for its finishes as cleaners that void it. Kohler lists its K-23723 faucet cleaner as a recommended product for both models. See how to clean a faucet aerator if the flow drops.

When to call a pro

Plumber’s note: the swap is a normal faucet job if the stops close and the deck fits. Call a plumber if the stops will not shut off, the supply pipes are corroded, or a stone counter has to be drilled for the hole. See what a faucet install costs.

Will it fit? Check your numbers

Type what you measured. Each faucet is compared with its maker’s own numbers. Anything you leave blank stays “not measured”. It never counts as a fit.

1Holes in the sink or counter

Measure the hole, not the old faucet’s base.

Sink rim plus counter, measured from below.

To the backsplash or window ledge.

A cabinet, a shelf or an inward-opening window.

6Outlet on the shutoff valves
Optional: pots and reach
See how the five compare

How the five compare with your sink

Nothing measured yet. Start with the holes.

    Whose numbers
    Each maker’s own spec sheet or drawing, gathered November 15, 2026. Makers call them nominal or for reference.
    Kraus deck
    Up to 1½ in. fits every Kraus source. From 1½ to 3⅜ in., Kraus’s own documents disagree, so ask Kraus.
    Purist deck
    2½ in. on the sheet. Kohler lists a 1327990 extension kit with a range of 2½ to 4⅝ in., so a thicker deck routes to “check first”, not a fit.
    Delta Antoni
    On 3 holes it sits on its escutcheon: 20¼ in. tall. On 1 hole it can go without: 19¾ in.
    Moen Nolia
    Moen does not list a wand-outlet height, so the checker gives the Nolia no pot verdict instead of borrowing a number.
    Pots
    Room for a pot is the sink depth plus the room under the spout. That assumes the faucet sits at the sink rim. A tall pot can still fill with the spray head pulled down.
    Not checked
    Water pressure, hole spacing on 3-hole sinks, cabinet depth and anything under the sink. Use the fit check above for those.

    3-year cost calculator

    Compare two faucets with the prices you see or are quoted. Type 0 for installation if you’ll put it in yourself.

    3-year cost = faucet + installation + any parts or repairs you expect

    Option A
    Option B

    Enter the amounts for both options to compare them.

    How it counts: Faucet makers don’t publish a replacement schedule, so this counts one faucet. Add any cartridge, aerator or repair costs you expect. Tax isn’t included.

    Before you buy

    Five measurements and one warning, before any of these goes in a cart.

    1. Measure the height above the sink

      Compare it to 17 5/16 in. (Moen), 18¾ in. (Kraus), 19¾ in. (Delta), 21⅝ in. (Kohler semi-professional) and 23 13/16 in. (Kohler Purist). The fit checker does this with your number.

    2. Check the backsplash gap

      If the faucet hole sits close to tile, pick a handle that swings forward: the Kohler Purist or the Kraus.

    3. Count the sink holes

      Extra holes need a plate. The Kohler semi-professional covers up to 4.

    4. Measure the deck

      Delta, Kohler and Moen stop at 2½ in. Kraus takes 3⅜ in. on its sheet, and Kohler lists an extension kit for the Purist.

    5. Skip the portable dishwasher hookup

      Kraus says pull-down faucets should never feed one, because pressure swings can rupture the hose (Kraus sheet).

    Set on a brand? The picks above span four makers; for every style from those makers, see the kitchen faucet guide.

    Questions buyers ask

    What is a commercial-style kitchen faucet?

    It is a home faucet styled after a restaurant pre-rinse unit: a tall spring or coil spout with a pull-down wand parked on an arm. The five here are residential faucets. In commercial use Moen and Delta cut the warranty to 5 years and Kraus to 1 year, against lifetime terms in a home. Kohler’s warranty text says 5 years, but one of its footnotes says 1 year. A true restaurant pre-rinse unit is a different product.

    Limit: Read the warranty for the room the faucet will work in, not the room in the photo.

    Will a commercial-style faucet fit under my cabinets?

    Measure from the counter to the lowest thing above the sink. On the makers’ documents the Moen Nolia is 17 5/16 in. installed (Moen), the Kraus Bolden 18¾ in. (Kraus), the Delta Antoni 19¾ in., the Kohler semi-professional 21⅝ in. and the Kohler Purist 23 13/16 in. Kraus says the Bolden fits under standard kitchen cabinets.

    Limit: Leave room to lift the wand off its dock without hitting the cabinet or sash.

    Do commercial-style faucets have more water pressure?

    No. Flow is limited at the faucet: 1.5 gpm at 60 psi for the Kohler and Moen picks and 1.8 gpm for the Kraus and Delta. Kohler’s Boost raises flow 30% and Moen has Power Boost. The spray pattern changes how hard the water feels, not how much your pipes deliver. If every faucet in the house is weak, see how to fix low water pressure.

    Limit: Federal rules cap kitchen faucets at 2.2 gpm at 60 psi (eCFR). Real flow still depends on your water pressure.

    Can I connect a portable dishwasher to a commercial-style faucet?

    No. Kraus’s spec sheet says pull-out and pull-down faucets should never be connected to portable dishwashers, because pressure swings during the wash cycle can rupture the hose or cause leaks (Kraus sheet).

    Limit: The warning is printed for the Kraus; the hose risk is the same shape on any pull-down.

    Do commercial-style faucets need a special sink?

    No. All five mount through one hole in a standard sink or counter. The Kraus, Delta and Moen take a plate for a 3-hole sink, the Kohler semi-professional fits 1 to 4 holes, and the Kohler Purist is single-hole only. Check the deck: the Delta, Kohler and Moen picks stop at 2½ in. and the Kraus takes 3⅜ in. See kitchen faucet hole sizes.

    Limit: A tall spring faucet puts more leverage on the mounting nut than a short one. Tighten the mount fully.

    How we chose

    Isaac Daniels
    Licensed Journeyman Plumber

    Research-led. Each pick earns its place by solving a different sink problem: a low cabinet, a tight backsplash, a double bowl, extra holes, or the longest reach in an open kitchen. The numbers come from the makers’ spec sheets, drawings and parts lists in Sources. Picks follow that method: maker documents, parts availability and fit, never commission rates.

    Plumbing Picks is written by a licensed Georgia journeyman plumber. Every spec here comes from the maker documents listed below. If you buy through a link I may earn a commission at no extra cost to you. Nobody pays to be included here.

    On November 18, 2026, the price feed carried no live price for any of the five finishes, so all five picks show as comparison-only, with no price and no buy link, until the feed carries the listings again. More on who writes this and how I pick.

    Maker documents gathered November 15, 2026; figures and the price feed rechecked November 18, 2026.

    Bottom line

    The Kraus Bolden KPF-1610 is the commercial-style faucet to buy for most kitchens: it fits under standard cabinets, its handle clears a tight backsplash, and it takes the thickest deck here. The Delta Antoni 18803 swings a full circle for a double bowl. The Kohler K-R22745-SD gives the best spray options and fits up to four holes. The Kohler Purist K-24982 reaches farthest where nothing hangs above the sink, and the Moen Nolia 87886 is the lowest spring spout. Measure the height above the sink first, then the backsplash gap and the deck thickness.

    Related guides: Best Pull-Down Kitchen Faucets · Best Kitchen Faucets · Best Kitchen Faucet Sprayer Replacements · Kitchen Faucet Hole Size · How to Tighten a Loose Faucet Base

    Sources

    Each one is also linked next to the claim it supports, where a document link exists.

    1. KPF-1610 spec sheet, rev. June 27, 2024, Kraus. Sizes, 3⅜ in. deck, 1.8 gpm, two-function sprayhead, 35 mm cartridge, dishwasher warning.
    2. KPF-1610 installation manual, Kraus. 1⅜ in. minimum hole, 1, 2 or 3 hole install with optional plate, tools, finish care.
    3. KPF-1610SSMB product page and Q&A, Kraus. Forward handle, DP02 plate, 1½ in. deck answer.
    4. Kraus product warranty, Kraus. Structure and finish terms, sprayhead and cartridge terms, authorized-dealer rule.
    5. Antoni 18803-DST spec sheet DSP-K-18803-DST Rev. A, Delta. Sizes, holes, deck, 2½ in. backsplash clearance, 1.8 gpm, 360 degree swing, standards. Read as a hosted copy; deltafaucet.com would not serve its pages to my reader.
    6. K-R22745-SD semi-professional spec sheet, dated June 13, 2024, Kohler. Sizes, 1 to 4 holes, Sweep and Boost, DockNetik, finishes.
    7. Purist K-24982 semi-professional spec sheet, Kohler. Sizes, single hole, 1327990 extension kit range, temperature memory.
    8. KOHLER Faucet Lifetime Limited Warranty 1353511-12, Kohler. Finish terms and the non-Vibrant footnotes.
    9. Nolia 87886 spec sheet, Rev. 5/22, Moen. Sizes, 1255 cartridge, PowerBoost, 68 in. hose, Georgia SB370, warranty.
    10. Nolia installation instructions INS10917A, Moen. Right-side handle, the 15-second flush.
    11. Nolia 87886 product page, Moen. Four spray settings, deck plate included.
    12. 10 CFR 430.32(o), eCFR. Kitchen faucets: 2.2 gpm at 60 psi, made after January 1, 1994.