​
Moen Eva Faucet

For a 4-inch centerset sink, pick the Moen Eva 6410. For a widespread sink, pick the TV6420 with its valve. For one hole, pick the 6400. For a matching tub and shower on a Posi-Temp valve, pick the T2133EP trim.

Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

This guide compares four Moen Eva pieces using Moen’s own spec sheets.

Moen Eva faucets compared (Moen spec sheets)

On a phone, swipe or scroll the table sideways to see every column.

Nominal Moen figures from the drawings. Bath faucets come at 1.2 or 1.5 gpm depending on the marking on the unit.
ModelFitsReach / heightMax deckCartridge
6410 centerset3 holes, 4 in. centers3-7/8 in. / 6-3/16 in.1-3/16 in.1234
TV6420 widespread3 holes, 8 to 16 in. centers4-7/8 in. / 6 in.1-1/4 in. (kit to 3 in.)1234 Duralast
6400 single-handle1 hole, or 3 with plate5-1/16 in. / 6-5/8 in.2-1/2 in.1255 Duralast
T2133EP tub and shower trimMoen Posi-Temp valve7 in. round plateSee valve1222

Eva is a Moen collection that covers bathroom sink faucets and tub and shower trim; the Eva Roman tub trim is in our Moen Roman tub faucet guide. Each Eva sheet lists metal construction, lever handles that are ADA compliant, and a lifetime limited warranty against leaks, drips and finish defects, with shorter terms for commercial use. Moen notes there is more than one version of each model.

Moen Eva 6410BN: 4-inch centerset

Choose the Eva 6410 for a three-hole sink with 4-inch centers. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/6410sp.pdf) lists a two-handle 4-inch lavatory faucet with a metal pop-up waste assembly, lever handles that turn 90 degrees to full on, 1/2-inch IPS connections with 1/2-inch NPT inlets, a 1234 cartridge design and installation through three 1-inch minimum holes. The drawing shows a 3-7/8-inch reach, a 6-3/16-inch spout height, 4-1/2 inches from deck to aerator and a deck range of 5/16 to 1-3/16 inches.

Moen also lists bulk models 66410 and 66411, packed six per carton with a 50/50 waste assembly. On October 15, 2026, the standard new offer sold by Amazon.com showed In Stock with model 6410BN, brushed nickel.

Check Moen Eva 6410BN centerset faucet on Amazon →

Moen Eva TV6420BN: widespread with valve

Choose the Eva TV6420 for a widespread sink, with the rough-in valve in the box. Moen’s T6420 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t6420sp.pdf) pairs the widespread trim with the 9000 valve and lists the Duralock quick connect system, lever handles, 1/2-inch IPS connections and a 1234 Duralast cartridge. It installs through three 1-1/8-inch minimum holes on 8- to 16-inch centers. The drawing shows a 4-7/8-inch reach and a 6-inch spout height, with a 1-1/4-inch maximum deck; Moen lists service kit 175709 for decks from 1-1/2 to 3 inches.

The Amazon listing for the TV6420BN says the valve is included. On October 15, 2026, the standard new offer sold by Amazon.com showed In Stock with model TV6420BN, brushed nickel.

Check Moen Eva TV6420BN widespread faucet on Amazon →

Moen Eva 6400BN: single handle

Choose the Eva 6400 for one lever on a single-hole sink, or on a vessel sink with the extension kit. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/6400sp.pdf) lists a metal pop-up waste assembly, an optional 6 by 2-1/2-inch three-hole deck plate, flexible supplies with 3/8-inch compression fittings, a pivot-action lever with a 100-degree arc, and a 1255 Duralast cartridge. It installs through one 1-1/8-inch minimum hole; Moen lists the A1717 extension kit for vessel sinks.

The drawing shows a 5-1/16-inch reach, a 6-5/8-inch spout height, 4-7/8 inches from deck to aerator, an overall height of 8-3/4 inches and a 2-1/2-inch maximum deck. It notes a 2-1/2-inch minimum back splash clearance for the lift rod. On October 15, 2026, the standard new offer sold by Amazon.com showed In Stock with model 6400BN, brushed nickel.

Check Moen Eva 6400BN single-handle faucet on Amazon →

Moen Eva T2133EPBN: Posi-Temp tub and shower trim

Choose the Eva T2133EP to match the tub and shower to Eva sink faucets, on a Moen Posi-Temp valve. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t2133sp.pdf) covers the Eva Posi-Temp trims: T2131 valve trim only, T2132 shower only and T2133 tub and shower. It lists the 2500 and 62300 series valves, a showerhead, arm, flange and diverter spout, a 1222 cartridge design, a 7-inch escutcheon and a handle that turns counterclockwise through a 270-degree arc, with an adjustable limit stop for maximum hot.

EP models are limited to 1.75 gpm at 80 psi and are WaterSense certified; Moen describes the valve as pressure balancing.

The trim does not include the valve. On October 15, 2026, the standard new offer sold by SpaceCityProviders showed limited stock with model T2133EPBN, brushed nickel. See our Moen trim compatibility guide and 1222 vs 1225 cartridge guide before you order.

Check Moen Eva T2133EPBN tub and shower trim on Amazon →

Check these before you order

  • Hole pattern. 4-inch centers take the 6410; 8 to 16 inches take the TV6420; one hole takes the 6400 (or three with its plate).
  • Deck thickness. The 6410 tops out at 1-3/16 inches and the TV6420 at 1-1/4 inches without kit 175709.
  • Shower valve. The T2133 needs a Moen Posi-Temp valve from the 2500 or 62300 series. Look at the valve or old trim before you order.
  • Back clearance. The 6400 needs 2-1/2 inches behind it for the lift rod.
  • Flow marking. Bath models come at 1.2 or 1.5 gpm by marking; Moen says 1.2 gpm units meet California efficiency rules.

Which Eva piece should you buy?

Start with the sink. A 4-inch three-hole sink takes the 6410, a widespread sink takes the TV6420 with its valve, and a one-hole or vessel sink takes the 6400. All three are Eva models with lever handles, so they can match across a double vanity or a second bathroom. In the shower, the T2133EP completes the set only if the wall holds a Moen Posi-Temp valve; if it holds a Moentrol or another brand’s valve, check our trim compatibility guide first.

Rough-in notes from the shower sheet

The T2133 sheet also gives rough-in heights for the valve and head, which help on a remodel. It shows the valve centerline at 45 to 48 inches above the floor for a shower and 32 inches for a tub or tub and shower and the shower arm outlet at 6 feet 6 inches. The tub spout projects 7 inches from the wall and the shower arm and head about 7-13/16 inches.

Supply and outlet connections are shown as 1/2-inch copper (CC) or 1/2-inch IPS, with a maximum wall of 2 inches for copper and 1-7/8 inches for IPS on the drawing. It shows a 4-1/2-inch wall opening behind the 7-inch plate, and separate thin-wall and thick-wall details. Those are Moen’s drawing figures; local codes and your own layout decide the final heights. For a matching Brantford set instead, see our Moen Brantford faucet guide.

Frequently asked questions

Does the Moen Eva widespread faucet include the valve?

The TV6420 does; Moen pairs the T6420 trim with the 9000 valve, and the Amazon listing says valve included.

What cartridge does the Moen Eva tub and shower trim use?

The sheet lists a 1222 cartridge design.

What valve does the Eva T2133 need?

A Moen Posi-Temp valve from the 2500 or 62300 series, sold separately.

Can the Eva 6400 go on a vessel sink?

Yes, with Moen’s A1717 extension kit, per the sheet.

Does the Eva centerset include a drain?

Yes. The 6410 sheet lists a metal pop-up waste assembly.

How we chose

This document-based guide makes no hands-on testing claim. We read and rendered Moen’s spec sheets for the Eva 6410, T6420, 6400 and T2133. On October 15, 2026, we checked each linked standard new Amazon offer for model, seller, stock and an add-to-cart button. The Eva Roman tub trim is covered on a separate page. Read our selection method and about Plumbing Picks.

Primary sources

  • Moen Eva 6410 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/6410sp.pdf): 4 in. centerset, 1234, deck range.
  • Moen Eva T6420 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t6420sp.pdf): widespread, 9000 valve, kit 175709.
  • Moen Eva 6400 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/6400sp.pdf): single handle, A1717, 1255.
  • Moen Eva T2133 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t2133sp.pdf): Posi-Temp trim, 1222, 2500/62300 valves, rough-in.

More guides like this

About this guide: Plumbing Picks is owned by Isaac Daniels, Journeyman Plumber — State of Georgia Licence #JP507711 (verify at verify.sos.ga.gov). This guide was researched and written by Plumbing Picks from manufacturer documents and product specifications. Product picks follow the method described in How We Pick: maker documents, parts availability and fit, never commission rates. Questions or corrections: reach Isaac through the contact page.


🔧 Guide finder
Hi! I am the Plumbing Picks assistant. Ask me about toilets, faucets, drains, leaks, water heaters, hard water, tools — anything plumbing — and I will point you to the fix. What is going on?