​
Moen Genta LX Faucets Compared

For the kitchen, pick the Moen Genta LX 7882SRS. For a three-hole bathroom sink, the TV6708BL with its valve. For a shower with a Posi-Temp valve, the T2472EPBL trim.

Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.

This guide compares three Moen Genta LX faucets using Moen’s own spec sheets.

Moen Genta LX compared (Moen spec sheets)

On a phone, swipe or scroll the table sideways to see every column.

Figures from Moen spec sheets and drawings.
ModelRoomTypeFlowCartridge or valve
7882SRSKitchenSingle-handle pull-down1.5 gpm1255 Duralast cartridge
TV6708BLBathroomTwo-handle widespread1.2 gpmT6708 trim on a 9000-series valve
T2472EPBLShowerPosi-Temp shower trim1.75 gpm (made after June 30, 2018)1222 cartridge, needs Posi-Temp valve

Moen sells Genta LX as a collection across the kitchen, bathroom and shower, so buying from it can keep the handle shape and finish consistent from room to room. The Moen sheets for all three list the same warranty: lifetime limited against leaks, drips and finish defects to the original homeowner, 10 years in a multifamily installation and 5 years in a commercial one. The single-handle Genta LX 6702 bathroom faucet is covered in our Moen bathroom faucet guide.

Moen Genta LX 7882SRS: kitchen pull-down

Choose the 7882SRS for a tall single-handle kitchen pull-down. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/7882sp.pdf) lists the Reflex pulldown system for secure docking, PowerBoost spray, Duralock quick connect installation, a 68-inch braided hose, a 360-degree spout, a lever handle with 100 degrees of travel, a 1.5 gpm flow limit at 60 psi and the 1255 Duralast cartridge.

The drawing shows a 16-inch overall height, 9-3/8 inches from the deck to the spray outlet, a 7-11/16-inch reach to the outlet and a 10-3/8-inch deck plate. Moen says it installs through one or three holes at least 1-1/2 inches in diameter. The sheet also says the handle operates with less than 5 pounds of force and that the spray works in stream or spray mode whether the wand is docked or pulled down. On October 15, 2026, the standard new offer sold by Amazon.com showed limited stock with model 7882SRS, Spot Resist Stainless.

Check Moen Genta LX 7882SRS pull-down kitchen faucet on Amazon →

Moen Genta LX TV6708BL: two-handle widespread with valve

Choose the TV6708BL for a three-hole bathroom sink if you want the valve in the same box. The “TV” listing pairs the T6708 trim with its valve; Moen’s T6708 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t6708sp.pdf) lists the 9000 and 69000 valves for this trim. It lists metal construction, lever handles that rotate 90 degrees to full on, a 1.2 gpm maximum flow, WaterSense certification and M-Pact valve compatibility.

The drawing shows a 5-1/2-inch spout height, 4-5/16 inches from the deck to the outlet, a 4-3/4-inch reach and handles 3-1/32 inches tall, drawn 10 inches apart center to center. The hot handle turns counterclockwise to open and the cold handle clockwise. On October 15, 2026, the standard new offer sold by Amazon.com showed a delivery date and an add-to-cart button with model TV6708BL, matte black.

Check Moen Genta LX TV6708BL widespread bathroom faucet with valve on Amazon →

Moen Genta LX T2472EPBL: shower trim

Choose the T2472EPBL to update a shower that already has a Moen Posi-Temp valve. Moen’s spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t2473sp.pdf) covers the T2471 valve trim, T2472EP shower trim and T2473EP tub and shower trim, and lists the 62300 and 2500 series valves. The T2472EP is shower trim only: showerhead, arm, flange and lever handle, with no tub spout. The valve is not included.

Moen lists a pressure-balancing mechanism that holds the selected temperature to within 3.6 degrees F, an adjustable temperature limit stop, a 270-degree handle arc, the 1222 cartridge and a 6-function showerhead. EP models made after June 30, 2018 are limited to 1.75 gpm. On October 15, 2026, the standard new offer sold by Amazon.com was in stock with model T2472EPBL, matte black.

Check Moen Genta LX T2472EPBL shower trim on Amazon →

Matching the rooms: what carries over

Finish. The links here are Spot Resist Stainless for the kitchen and matte black for the bath and shower. Moen sells each in several finishes; the suffix on the model number (SRS, BL, BN) is the finish, so match suffixes if you want the rooms to agree.

Cartridges. The kitchen faucet uses the 1255 Duralast cartridge and the shower trim the 1222 cartridge. Those are the parts to look up if either one drips years later; our shower cartridge guide covers the 1222 symptoms.

Valves. The bathroom faucet comes with its valve in the TV listing. The shower trim needs a Moen Posi-Temp valve in the wall; if you are not sure which valve you have, see our Moen trim compatibility guide before you order.

Flow. 1.5 gpm in the kitchen, 1.2 gpm in the bath and 1.75 gpm in the shower, per the sheets.

Reading the Genta LX drawings

Moen marks each drawing “Critical dimensions, do not scale,” so rely on the printed numbers.

Kitchen clearance. The 7882 drawing gives 9-3/8 inches from the deck to the spray outlet. That is the room you have for filling a tall pot under the spout without pulling the wand down.

Bathroom reach. The T6708 drawing gives a 4-3/4-inch reach from the spout centerline to the outlet. Compare that with the distance from your faucet holes to the drain so the stream lands near the middle of the bowl.

Handle room. The kitchen lever sits on the side of the body; the drawing shows it reaching 4-3/4 inches from the faucet centerline, which matters near a backsplash or window sill.

Installation notes from the sheets

Kitchen. The 7882 mounts in one hole, or three holes with the deck plate, and Moen says each hole must be at least 1-1/2 inches across. Moen lists Duralock quick connect installation for the hose, and the supply lines have 3/8-inch compression fittings.

Bathroom. The T6708 trim fits the 9000 and 69000 valves listed on the sheet. Check the spacing between your sink’s outer holes before ordering any widespread faucet.

Shower. The T2473 sheet shows the shower valve at 45 or 48 inches above the floor for a shower and the showerhead at a nominal 6 feet 6 inches, with a 4-1/2-inch wall opening. If you are replacing only the trim, these are already set by the valve in the wall.

Check these before you order

  • Valve. The shower trim needs a Moen Posi-Temp valve already installed.
  • Sink holes. One or three for the kitchen; three for the widespread bath faucet.
  • Height. The kitchen faucet is 16 inches tall; check under cabinets or a window.
  • Finish. Match the model suffix across rooms.
  • Flow. 1.2, 1.5 and 1.75 gpm by room.
  • Tub. For a tub with a spout, the T2473EP version is the tub/shower trim.

Which Moen Genta LX should you buy?

For the kitchen, the 7882SRS pull-down. For a three-hole bathroom sink with the valve included, the TV6708BL. For a stall shower on an existing Posi-Temp valve, the T2472EPBL trim. For complete Moen shower faucets with the valve included, see our Moen shower faucet guide, and for more Moen kitchen faucets, our Moen kitchen faucet guide.

Frequently asked questions

Does the Moen Genta LX shower trim include the valve?

No. The T2472EP is shower trim only and needs a Moen Posi-Temp valve.

What cartridge does the Moen Genta LX kitchen faucet use?

The 7882 sheet lists the 1255 Duralast cartridge.

What is the flow rate of the Genta LX bathroom faucet?

Moen lists 1.2 gpm maximum for the T6708 trim.

How tall is the Moen Genta LX kitchen faucet?

The drawing shows 16 inches overall.

Which valve does the Genta LX widespread trim use?

The T6708 sheet lists the 9000 and 69000 valves.

How we chose

This document-based guide makes no hands-on testing claim. We read Moen’s spec sheets for the Genta LX 7882, T6708 and T2471/T2472/T2473 and rendered the 7882 and T6708 drawings. On October 15, 2026, we checked each linked standard new Amazon offer for model, seller, stock and an add-to-cart button. Read our selection method and about Plumbing Picks.

Primary sources

  • Moen 7882 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/7882sp.pdf): pull-down, 1255, drawing.
  • Moen T6708 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t6708sp.pdf): widespread, 9000 valve.
  • Moen T2471/T2472/T2473 spec sheet (maker page: assets.moen.com/shared/docs/product-specifications/t2473sp.pdf): Posi-Temp trim.

More guides like this

About this guide: Plumbing Picks is owned by Isaac Daniels, Journeyman Plumber — State of Georgia Licence #JP507711 (verify at verify.sos.ga.gov). This guide was researched and written by Plumbing Picks from manufacturer documents and product specifications. Product picks follow the method described in How We Pick: maker documents, parts availability and fit, never commission rates. Questions or corrections: reach Isaac through the contact page.


🔧 Guide finder
Hi! I am the Plumbing Picks assistant. Ask me about toilets, faucets, drains, leaks, water heaters, hard water, tools — anything plumbing — and I will point you to the fix. What is going on?