For a 4-inch three-hole sink, pick the Pfister Willa LF-048-MALGS. For a widespread sink, pick the Courant. For one hole, pick the Parisa in chrome or the all-metal Vaneri.
Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
This guide compares four Pfister bathroom sink faucets using Pfister’s own spec sheets.
Pfister bathroom faucets compared (Pfister spec sheets)
On a phone, swipe or scroll the table sideways to see every column.
| Faucet | Fits | Handles | Reach / aerator height | Max deck |
|---|---|---|---|---|
| Willa LF-048-MALGS | 3-hole, 4-in. centerset | 2 | 4-3/4 in. / 3-15/16 in. | 1-1/4 in. |
| Parisa LF-042-PRCC | 1 or 3 holes | 1 | 4-1/2 in. / 3-3/32 in. | 3 in. |
| Vaneri LF-042-VRIBB | 1 or 3 holes | 1 | 4-9/16 in. / 3-11/16 in. | 3 in. |
| Courant LF-049-COKK | 3-hole, 8 to 15 in. widespread | 2 | 5-1/4 in. / 4-21/32 in. | 1-1/2 in. at handles |
The first question is your sink’s hole pattern. A centerset faucet fits three holes with the outer two 4 inches apart. A widespread faucet uses three separate pieces spread 8 inches or more. A single-control faucet fits one hole, or three holes with its deck plate. Pfister lists a limited lifetime warranty on all four.
Pfister Willa LF-048-MALGS: 4-inch centerset
Choose the Willa centerset for a three-hole sink with 4-inch centers. Pfister’s Willa spec sheet (pfisterstorage.blob.core.windows.net) lists a 1.2 gpm flow rate, two handles, washerless cartridges, TiteSeal technology, a TiteSeal deck plate and a Push & Seal pop-up drain. The drawing shows 4-inch centers, an 8-15/16-inch overall width across the handles, a 6-1/16-inch height, a 4-3/4-inch reach and 3-15/16 inches from deck to aerator.
The maximum deck thickness is 1-1/4 inches, lower than the single-control models here, so check the sink or counter thickness first. Deck holes run 1 to 1-1/2 inches. Pfister’s Spot Defense finish, which it says resists spots and fingerprints, applies to the GS (brushed nickel) and SDB (matte black) finishes, not to polished chrome or brushed gold.
On October 15, 2026, the standard new offer sold by Amazon.com showed In Stock with model LF048MALGS, Spot Defense brushed nickel.
Check Pfister Willa LF-048-MALGS centerset faucet on Amazon →
Pfister Parisa LF-042-PRCC: simple single control
Choose the Parisa for a plain single-lever faucet in polished chrome. Pfister’s Parisa spec sheet (pfisterstorage.blob.core.windows.net) lists a 1.2 gpm flow rate, a Pforever Seal ceramic disc valve, a Push & Seal pop-up, mounting hardware and 1- or 3-hole installation with an optional deck and putty plate. The deck plate drawing is 5-7/8 inches long and covers holes on 4-inch centers.
The drawing shows a 6-3/16-inch height, a 4-1/2-inch reach, 3-3/32 inches from deck to aerator and a 3-inch maximum deck thickness. It has the lowest aerator height of the four. The sheet lists two finishes: polished chrome and brushed nickel.
On October 15, 2026, the standard new offer sold by Amazon.com showed limited stock with model LF042PRCC, polished chrome.
Check Pfister Parisa LF-042-PRCC bathroom faucet on Amazon →
Pfister Vaneri LF-042-VRIBB: all-metal single control
Choose the Vaneri if you want an all-metal single-control faucet and more finish choices. Pfister’s Vaneri spec sheet (pfisterstorage.blob.core.windows.net) lists all-metal construction, a 1.2 gpm flow rate, a Pforever Seal ceramic disc valve, 1- or 3-hole installation with an optional deck plate included, a Push & Seal drain, Pfast Connect supply lines, a TiteSeal deck plate and mounting hardware.
The drawing shows a 6-13/16-inch height, a 4-9/16-inch reach, 3-11/16 inches from deck to aerator, a 6-5/16-inch deck plate and a 3-inch maximum deck thickness. The sheet lists five finish codes; Pfister’s product page names polished chrome, matte black, brushed gold and Spot Defense brushed nickel.
On October 15, 2026, the standard new offer sold by Amazon.com showed In Stock with model LF042VRIBB, matte black.
Check Pfister Vaneri LF-042-VRIBB bathroom faucet on Amazon →
Pfister Courant LF-049-COKK: 8 to 15-inch widespread
Choose the Courant for a widespread sink and the tallest, longest spout here. Pfister’s Courant spec sheet (pfisterstorage.blob.core.windows.net) lists an 8- to 15-inch widespread lavatory faucet with a 1.2 gpm flow rate, a 360° rotating high-arc spout, fixed hubs, 3-hole installation, mounting hardware, Pfast Connect, a Quick Install Tool and a Push & Seal pop-up.
The drawing shows a 7-3/4-inch spout height, a 5-1/4-inch reach, 4-21/32 inches from deck to aerator and a 14-5/16-inch width at 8-inch centers. Maximum deck thickness is 1-1/2 inches at the handles and 3 inches at the spout; deck holes run 1-1/4 to 1-1/2 inches. One detail to note: the Push & Seal drawing on the sheet is labeled for the KK and YY finishes, while the feature list includes Push & Seal without a finish limit. The sheet lists polished chrome, brushed nickel (PVD) and Tuscan bronze.
On October 15, 2026, the standard new offer sold by Amazon.com showed limited stock with model LF049COKK, brushed nickel. We picked brushed nickel because Pfister’s current Courant widespread product page lists brushed nickel and Tuscan bronze; the polished chrome LF-049-COPC appears on the spec sheet but not on that page.
Check Pfister Courant LF-049-COKK widespread faucet on Amazon →
Check these before you order
- Hole pattern. Look under the sink and count the holes. Measure the outer two center to center: 4 inches means centerset (Willa); 8 inches or more means widespread (Courant). One hole fits the Parisa or Vaneri; both list 3-hole installation with a deck plate, and the Parisa plate drawing shows 4-inch centers.
- Deck thickness. The Willa lists 1-1/4 inches maximum and the Courant handles 1-1/2 inches. A thick stone vanity top can exceed those; the Parisa and Vaneri list 3 inches.
- Deck hole size. The sheets list 1 to 1-1/2 inches for the Willa, Parisa and Vaneri and 1-1/4 to 1-1/2 inches for the Courant.
- Spout clearance. Aerator heights run from 3-3/32 inches (Parisa) to 4-21/32 inches (Courant). A higher aerator leaves more room under the spout.
- Drain fit. Each sheet’s Push & Seal drawing shows a 1-1/2 to 2-1/2-inch range at the drain body; compare it with your sink’s drain opening area before install day.
Finishes and Spot Defense
Pfister uses letter codes at the end of each model number for the finish. On these four sheets, CC and PC are polished chrome, KK and GS are brushed nickel, BB is matte black, BG is brushed gold and YY is Tuscan bronze, matching the finish names on Pfister’s product pages and the Amazon listings we checked.
Spot Defense is Pfister’s name for a finish it says resists spots and fingerprints; the Willa and Vaneri sheets each say which codes have it. The Parisa and Courant sheets do not list Spot Defense. If you are matching a towel bar or a shower trim in the same room, use the finish code rather than the color name.
Which Pfister bathroom faucet should you buy?
Match the faucet to the holes you already have. Keep a 4-inch three-hole sink and pick the Willa. Replace a widespread faucet with the Courant. For a single-hole sink, or a single lever on a three-hole sink, pick the Parisa for chrome or the Vaneri for an all-metal body and more finishes. See also our bathroom faucet guide, our single-hole bathroom faucet guide and our black bathroom faucet guide. For Pfister kitchen models, see our Pfister kitchen faucet guide.
Frequently asked questions
What is the flow rate of Pfister bathroom faucets?
All four in this guide are listed at 1.2 gpm.
Do Pfister bathroom faucets come with a drain?
Yes. All four sheets list a Push & Seal pop-up drain.
Which Pfister faucet fits a 4-inch centerset sink?
The Willa LF-048-MAL is a 4-inch centerset. The Parisa deck plate drawing also shows 4-inch centers.
Which Pfister bathroom faucet is widespread?
The Courant LF-049-CO fits 8- to 15-inch widespread sinks.
What is Pfister Spot Defense?
A finish Pfister says resists spots and fingerprints; which finishes have it varies by model.
How we chose
This document-based guide makes no hands-on testing claim. We read and rendered Pfister’s spec sheets for the Willa centerset, Parisa, Vaneri and Courant. On October 15, 2026, we checked each linked standard new Amazon offer for model, seller, stock and an add-to-cart button. Read our selection method and about Plumbing Picks.
Primary sources
- Pfister Willa centerset spec sheet SS-LF048-MALXX (pfisterstorage.blob.core.windows.net): 4 in. centers, 1-1/4 max deck, Spot Defense finishes.
- Pfister Parisa spec sheet SS-LF042-PRXX (pfisterstorage.blob.core.windows.net): single control, dimensions, 2 finishes.
- Pfister Vaneri spec sheet SS-LF042-VRIXX (pfisterstorage.blob.core.windows.net): all metal, dimensions, 5 finishes.
- Pfister Courant spec sheet SS-LF049-COXX (pfisterstorage.blob.core.windows.net): 8-15 in. widespread, dimensions, drain label.