For a wall-supplied prep sink, pick the T&S B-0231 with its 12-inch swing nozzle. For a single deck hole, pick the B-0300 gooseneck. For a 4-inch hand sink, pick the B-0892 with wrist handles, and for a mop sink, the B-0665-BSTR. Buy by the exact T&S model number, since suffixes change cartridges and inlets.
Plumbing Picks is reader-supported. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
This guide compares four T&S Brass commercial faucets by where they are used, from T&S product pages.
T&S Brass faucets compared (T&S product pages)
On a phone, swipe or scroll the table sideways to see every column.
| Model | Mount / centers | Spout / listed flow | Handles / inlets |
|---|---|---|---|
| B-0231 | Wall, 8 in. | 12 in. swing nozzle, stream regulator; 23.09 gpm nozzle flow | Levers; 1/2 in. NPT female |
| B-0300 | Deck, single hole | 5-3/4 in. swivel/rigid gooseneck, stream regulator; 8.67 gpm | Levers; 18 in. stainless supply hoses |
| B-0892 | Deck, 4 in. centerset | 2-7/8 in. swivel/rigid gooseneck; 2.2 gpm aerator | 4 in. wrist action; 1/2 in. NPSM male |
| B-0665-BSTR | Wall, 8 in. service sink | Vacuum breaker spout, hose outlet; 12.96 gpm | Levers; built-in stops |
T&S Brass makes commercial faucets for foodservice, healthcare and other commercial buildings. The pantry and service models here list high nozzle flows, while the lavatory model uses a 2.2 gpm aerator. Check local flow limits for the fixture you are fitting.
T&S B-0231: wall-mount pantry faucet with 12-inch swing nozzle
Choose the T&S B-0231 for a commercial kitchen or prep sink with wall supplies on 8-inch centers. The B-0231 page (tsbrass.com) lists an 8-inch wall-mount mixing faucet with a polished-chrome-plated brass body, a 12-inch swing nozzle (062X) with a stream regulator outlet, compression cartridges with checks, lever handles and 1/2-inch NPT female inlets. It lists a nozzle flow of 23.09 gpm at its rating, 20 to 125 psi and 40 to 140°F. The T&S drawing (tsbrass.com) gives the rough-in.
T&S also sells it as a kit with an install kit (B-0230-KIT). On October 15, 2026, the standard new offer from HDS Company showed stock with model B-0231; the listing’s color field says “Brass,” while T&S lists a polished chrome plated brass body.
Check T&S Brass B-0231 wall-mount pantry faucet on Amazon →
T&S B-0300: single-hole gooseneck pantry faucet
Choose the T&S B-0300 for a deck with a single hole. The B-0300 page (tsbrass.com) lists a single-hole deck-mount mixing faucet with a polished-chrome-plated brass body, a 5-3/4-inch swivel/rigid gooseneck with stream regulator outlet, compression cartridges with spring checks, lever handles, and 18-inch flexible stainless steel supply hoses with 1/2-inch NPSM / 5/8-inch OD compression connections. It lists 8.67 gpm nozzle flow, 20 to 125 psi and 40 to 140°F, the same pressure and temperature ratings as the B-0231.
Because the supply hoses come attached, check that 18 inches reaches your stops and that the 1/2-inch NPSM / 5/8-inch OD compression connections match them; if not, plan an adapter or a different supply before installation day. On October 15, 2026, the standard new offer from eFaucets showed stock with model B-0300.
Check T&S Brass B-0300 single-hole gooseneck faucet on Amazon →
T&S B-0892: 4-inch lavatory with wrist handles
Choose the T&S B-0892 for a lavatory or hand sink with 4-inch centers where wrist handles are wanted. The B-0892 page (tsbrass.com) lists a 4-inch centerset deck-mount mixing faucet with a polished-chrome-plated brass body, a 2-7/8-inch swivel/rigid gooseneck, a 2.2 gpm aerator, compression cartridges with spring checks, 4-inch wrist-action handles and 1/2-inch NPSM male inlets.
T&S lists it among its medical lavatory faucets. Its 1/2-inch NPSM male inlets need supply lines with matching female nuts, so buy those with the faucet if your old supplies differ. We describe it only by its listed features and make no infection-control or health claim.
On October 15, 2026, the standard new offer from eFaucets showed stock with model B-0892.
Check T&S Brass B-0892 4 in. lavatory faucet on Amazon →
T&S B-0665-BSTR: service sink faucet
Choose the T&S B-0665-BSTR for a mop or service sink. The B-0665-BSTR page (tsbrass.com) lists an 8-inch wall-mount faucet with a vacuum breaker, pail hook, garden-hose outlet, built-in stops, compression cartridges with spring checks and an upper support rod. Our mop sink faucet guide compares it with Chicago, Moen and Delta models.
On October 15, 2026, the standard new offer from eFaucets showed limited stock with model B-0665-BSTR.
Check T&S Brass B-0665-BSTR service sink faucet on Amazon →
Reading T&S model numbers and options
T&S sells many variants of the same body. On Amazon alone, the B-0231 appears with CC, EE, BB and CR suffixes, which the listings describe as different inlet styles (CC, EE, BB) and ceramic cartridges (CR); for example, the B-0231-CR listing describes ceramic cartridges. Buy by the exact model number shown on the T&S page for the configuration you need, and do not assume two suffixes are interchangeable.
Nozzles are often separate part numbers too: the B-0231 page names its 12-inch swing nozzle as 062X. If you need a different nozzle length, look up the matching nozzle on T&S rather than guessing.
Matching the faucet to the sink
Cartridges, checks and install kits
All four T&S pages list compression cartridges with checks or spring checks, and the B-0665-BSTR drawing names its cartridges quarter-turn Eterna cartridges. If you prefer ceramic cartridges, look for a CR version of the same body, such as the B-0231-CR, and confirm the change on the T&S page for that exact model.
T&S also lists combo kits that add an install kit to the faucet: the B-0231-KIT pairs the B-0231 with the B-0230-KIT install kit, and the B-0892 page lists a B-0892-KIT. A kit is a convenience, not a requirement; check what supplies, wall flanges and fittings your job already has before you decide.
Keep the model number and finish with the building’s maintenance records so replacement cartridges and nozzles are ordered by the correct part number later.
Count the holes and measure their centers before ordering: wall mount 8-inch for the B-0231 and B-0665-BSTR, a single deck hole for the B-0300, and a 4-inch centerset for the B-0892. Check that the nozzle or gooseneck reaches the middle of the bowl and clears anything above it.
For restaurant dish areas, our pre-rinse faucet guide covers T&S pre-rinse units. For another commercial brand, see our Chicago Faucets guide.
Frequently asked questions
Are T&S Brass faucets good?
T&S makes commercial faucets; the four models here list 20 to 125 psi, 40 to 140°F and ADA ANSI/ICC A117.1 on their product pages.
What is a T&S pantry faucet?
T&S lists the B-0231 and B-0300 under its pantry faucets; both are mixing faucets with a nozzle or gooseneck and a stream regulator outlet.
Which T&S faucet fits a single hole?
The B-0300, a single-hole deck-mount faucet with a 5-3/4-inch gooseneck and 18-inch supply hoses.
Do T&S faucets come with supply lines?
The B-0300 lists 18-inch flexible stainless steel supply hoses. The B-0231 and B-0892 list inlets instead, so supplies are separate.
Does the T&S B-0231 have ceramic cartridges?
The base B-0231 lists compression cartridges with checks; a separate B-0231-CR version is listed with ceramic cartridges.
How we chose
This document-based guide makes no hands-on testing claim. We read T&S Brass product pages for the B-0231, B-0300, B-0892 and B-0665-BSTR and the B-0231 drawing; we omit list prices. On October 15, 2026, the B-0231 offer from HDS Company and the other three from eFaucets showed stock or limited stock. Read our selection method and about Plumbing Picks.
Primary sources
- T&S Brass B-0231 product page (tsbrass.com): 8 in. wall mount, 12 in. 062X swing nozzle, compression with checks, 23.09 gpm, ratings, ADA.
- T&S Brass B-0231 drawing (tsbrass.com): rough-in drawing.
- T&S Brass B-0300 product page (tsbrass.com): single hole, 5-3/4 in. gooseneck, 18 in. hoses, 8.67 gpm.
- T&S Brass B-0892 product page (tsbrass.com): 4 in. centerset, 2-7/8 in. gooseneck, 2.2 gpm aerator, wrist handles.
- T&S Brass B-0665-BSTR product page (tsbrass.com): service sink faucet, VB, stops, support rod.